Discussion about new update JAF No Tp by Cinek 1.04

[zeel_zeel]

Good update by Mr Raskal... Need update also in JAF .....

[mymiela0419]

Originally Posted by Raskal

if cinek confirm that those both hash not supported i would like to buy from you those 2 phones, it is possible? but before all this please try this solution and post result:
E62 is not supported via V1.04 why??? mr. RASKAL

B.R.,
Raskal

I can sell it to you mr. Raskal, but first I have to ask my customer if he would let me buy it from him too because this phones is from my customers, so you can support this HASH / version that is not supported via JAF no tp of your cinek software.

Originally Posted by renegade

I've made a single thread with your posts :

E62 is not supported via V1.04 why??? mr. RASKAL

Becouse the answer is the same for both phones :
You need to reflash those phones even with the same version (unbranded)

Yes, your right it can be flash but why cannot just be supported since it say on the list of phones on no tp that this models are suppose to be supported for no tp unlocking....

and lastly, this is happened to me way back on OCt. 2008 when I had my Noox box and tried to unlock of of the non supported version of 5300 and I have to flash from JAF and the 5300 suddenly died on flashing so for my opinion if this can possible to be supported why do we have to flash it for. If this models are listed why Cinek cannot just make a solution for better future of no tp unlocking for JAF.

Thank you for your replies

[Raskal]

Originally Posted by mymiela0419

I can sell it to you mr. Raskal, but first I have to ask my customer if he would let me buy it from him too because this phones is from my customers, so you can support this HASH / version that is not supported via JAF no tp of your cinek software.



Yes, your right it can be flash but why cannot just be supported since it say on the list of phones on no tp that this models are suppose to be supported for no tp unlocking....

and lastly, this is happened to me way back on OCt. 2008 when I had my Noox box and tried to unlock of of the non supported version of 5300 and I have to flash from JAF and the 5300 suddenly died on flashing so for my opinion if this can possible to be supported why do we have to flash it for. If this models are listed why Cinek cannot just make a solution for better future of no tp unlocking for JAF.

Thank you for your replies

okay please ask your customer, we talk tomorrow by pm about this.

about flashing, please try first flash it with GENERIC SOFTWARE this is original software without any branding on it, after this u must try the unlocker from cinek. u ask why need to reflash it and why it is not support without reflash, i think it is better reflash phone than to open phone and unlock.

about noox box, adv box, jaf plus, bb5box, all those boxes are USELESS now since cinek's JAF No Tp unlocker support more models, more software versions and u DONT NEED OPEN THE PHONE, u can just unlock it by cable without hassle, fast and without opening the phone. Those boxes don't even support flash mode, this mean all those boxes mentioned are like a "slave box" or like a "dongle" which need to use JAF or UFS interface anyway.

B.R.,
Raskal

[Raskal]

Originally Posted by zeel_zeel

Good update by Mr Raskal... Need update also in JAF .....

what update you need in JAF?

JAF is supporting all nokia phones up to date already. If u have some suggestions, please let me know and we make update.

B.R.
Raskal

[AZALCALL]

JAF box ATmega firmware version: 1B0
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
SP LOCK status:
Block 1: CLOSED Type 5 Data: 310150
Block 2: CLOSED Type 5 Data: 310150
Block 3: CLOSED Type 5 Data: 310170
Block 4: CLOSED Type 5 Data: 310170
Block 5: CLOSED Type 5 Data: 310410
Block 6: CLOSED Type 5 Data: 310410
Block 7: CLOSED Type 5 Data: 311180
Block 8: CLOSED Type 5 Data: 311180
Read Phone Info OK
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Reading PM Field 308 Subfield 1 with length 8192 bytes
Saving to file: RM-88_357951005357549_Locked_Keycnt_0_Fbuscnt_0__V__3 .06.33.09.11_23-04-07_RM-88_(c)_Nokia.__22_02_2009__21_16_50.bin
PM308 backup OK
Searching for JAF box ...
JAF box detected
JAF box ATmega firmware version: 1B0
Initialize JAF box ...
JAF box JAFBOX_BB5_FLASH_bb5challenge ...

ASIC ID: 000000010000022600010006010C192101001101
HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
JAF no TP v1.04
Sending loader...
Rap3Gv3 selected.
BB5_FLASH_CMTbootload
JAF CMT Boot Ready

Hello ok
ok
Get card info ...
Verify card OK
Get card info ...
Verify card OK
Hello ok
Hello ok
PM send.
Test call...
cpsr - 0x0000001F
p15_1 - 0x0005307F
p15_2 - 0x0005117F
p15_3 - 0x0005317F
Error. Something wrong, PM308 is not calculated - Maybe you try to unlock BB5+ phone ?
Operation time: 00:29.
Done with error(s).
Thread phone exit.

what is wrong?

[[c]Cinek]

@AZALCALL

Reflash phone even for the same version or upgrade FW version. Phone need debranding.

WBR
[c]Cinek

[renegade]

Originally Posted by mymiela0419

I can sell it to you mr. Raskal, but first I have to ask my customer if he would let me buy it from him too because this phones is from my customers, so you can support this HASH / version that is not supported via JAF no tp of your cinek software.



Yes, your right it can be flash but why cannot just be supported since it say on the list of phones on no tp that this models are suppose to be supported for no tp unlocking....

and lastly, this is happened to me way back on OCt. 2008 when I had my Noox box and tried to unlock of of the non supported version of 5300 and I have to flash from JAF and the 5300 suddenly died on flashing so for my opinion if this can possible to be supported why do we have to flash it for. If this models are listed why Cinek cannot just make a solution for better future of no tp unlocking for JAF.

Thank you for your replies

You don't understand what i said, it's not about hash or version, all version are supported by Cinek's unlocker, except for a few rapido phones with HASH 9A28E119033B91D14D22838C86D0D53C
But some used phones have some software issues and by flashing to any version you like (even the same as in phone) the problem is solved and can be unlocked at first attempt
If you are afraid of flashing, you probably have some bad cables in your shop..., try usb flashing, it's faster

Or you can try something else: make full factory with Jaf main sw (instead of full flashing) then try again to unlock with Jaf No Tp.

I agree, all softwares can be improved, but i unlocked at first attempt almost all phones i encountered, so i'm very pleased with it as it is right now...

[arybraga]

Good update Mr Raskal Mr [c] Cinek .........

[AZALCALL]

Originally Posted by [c]Cinek

@AZALCALL

Reflash phone even for the same version or upgrade FW version. Phone need debranding.

WBR
[c]Cinek

i did that upgrade and downgrade but same result.

[[c]Cinek]

Originally Posted by AZALCALL

i did that upgrade and downgrade but same result.

RM-88_DP2.0_APAC_18.06.32.exe flash with this unlock then flash to FW version which you want.

WBR

[AZALCALL]

ok i'll try and post result.
thank you for fast responds

[german gsm team]

Originally Posted by Raskal

LOL, very good answer.

Dear Raskal,

I don't think that this function is a joke, it's needed.

Even changed product codes are monitored by NK and result in warranty denials.

At least in Europe there are no warranty claims anymore without Verification ID that requires an online connection to NK. And no one knows exactly what they read out of the phone. So if the read out configuration key and their warranty database says factory simlock Y for yes they could easily deny warranty.

So please think about it.

Best regards.

[yarra]

wonderfull work thank you Raskal

[LOUAI2005]

hi.....................

Successfully done with 1.04 good job

JAF box ATmega firmware version: 1B1
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
SP LOCK status:
Block 1: CLOSED Type 5 Data: 20801F
Block 2: CLOSED Type 5 Data: 20801F
Read Phone Info OK
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Reading PM Field 308 Subfield 1 with length 8192 bytes
Saving to file: RM-159_353094029xxxxxx_Locked_Keycnt_0_Fbuscnt_0__V_0 6wk41v43.3_04-01-08_RM-159_(c)_Nokia__22_02_2009__23_18_02.bin
PM308 backup OK
Searching for JAF box ...
JAF box detected
JAF box ATmega firmware version: 1B1
Initialize JAF box ...
JAF box JAFBOX_BB5_FLASH_bb5challenge ...

ASIC ID: 000000010000022600010006400C192101021103
HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
JAF no TP v1.04
Sending loader...
RAPIDO_OLD selected.
BB5_FLASH_CMTbootload
JAF CMT Boot Ready

Hello ok
bb5king ldr start
bb5king send code ok
Get card info ...
Verify card OK
Get card info ...
Verify card OK
Hello ok
Hello ok
PM send.
Test call...
cpsr - 0x0000001F
p15_1 - 0x00C5387A
p15_2 - 0x00C5197E
p15_3 - 0x00C5397E
PM_308 CRC - 0x000CA712
ki - 0x00000001
ri - 0x00000001
pi - 0x00000001
param - 0x03, size - 0x00
UpdSLock - 0x00000001
PM_308 CRC - 0x00195764
Reciving PM
Hello ok
PM buff recived
After unlock.
JAF box ATmega firmware version: 1B1
Searching for phone ...
Phone found on FBUS interface
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Operation time: 01:01.
Successfully done.
Thread phone exit.

[gioguanez]

Originally Posted by Raskal

what update you need in JAF?

JAF is supporting all nokia phones up to date already. If u have some suggestions, please let me know and we make update.

B.R.
Raskal

as ive encountered here:
2680s RM-392 version 5.28 and
2600c RM-340 version 6.82, cant unlock, we need to downgrade those phones to be able to unlock..... please fix this bugs.....

thanks....

br,
gioguanez