GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > CPF-box Products > CPF-Dongle

Reply
 
LinkBack Thread Tools Display Modes
Old 03-05-2009, 22:30   #1 (permalink)
No Life Poster
 
Join Date: Jan 2007
Location: Recife - Brazil
Posts: 568
Member: 434450
Status: Offline
Thanks Meter: 51
whe need to work whit rx and tx com port for spreadtrum


we need to work whit rx and tx ports whit spreadtrum phones to remove password because these phone dont start to work whit usb ports i try to use the pinfinder to work whit the cpf dongle but dont recognize the phones the boot start but after that fail what we need to do i have 3 phones and no one worked and all is diferent all the pinfinder find the p
inouts but no one is working whit the cpfdongle software






Wait for connect...
Waiting for phone's response,press the Power on the phone.
User Terminate.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.


Wait for connect...
Waiting for phone's response,press the Power on the phone...
CPU version: 120(bytes)
time stamp: 0x48f5d8
Step2 16-8
Error, try again.
>>If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.
Information:
If does not have the COM to choose, please the reset cable pinouts, or unload phone's battery and load phone's battery again.
If read/write 6600R,select 'Boot C recommended(6600R)'.
If read/write 6800,select 'Boot E recommended(6800)'.


Wait for connect...
Waiting for phone's response,press the Power on the phone...
User Terminate.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.


Wait for connect...
Waiting for phone's response,press the Power on the phone.
User Terminate.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.


Wait for connect...
Waiting for phone's response,press the Power on the phone..
CPU version: econd boot loader started ...
boot
Step2 16-8
Error, try again.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.
Please first choose the flash file.
Please first choose the flash file.


Wait for connect...
Waiting for phone's response,press the Power on the phone..
CPU version: econd boot loader started ...
boot
Step2 16-8
Error, try again.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.


Wait for connect...
Waiting for phone's response,press the Power on the phone..
User Terminate.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.

  Reply With Quote
Old 03-06-2009, 05:10   #2 (permalink)
No Life Poster
 
phones-china's Avatar
 
Join Date: Oct 2007
Location: Chinese phones flasher
Age: 37
Posts: 519
Member: 602191
Status: Offline
Sonork: 100.1577310
Thanks Meter: 3,112
Quote:
Originally Posted by CellTronic View Post
we need to work whit rx and tx ports whit spreadtrum phones to remove password because these phone dont start to work whit usb ports i try to use the pinfinder to work whit the cpf dongle but dont recognize the phones the boot start but after that fail what we need to do i have 3 phones and no one worked and all is diferent all the pinfinder find the p
inouts but no one is working whit the cpfdongle software






Wait for connect...
Waiting for phone's response,press the Power on the phone.
User Terminate.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.


Wait for connect...
Waiting for phone's response,press the Power on the phone...
CPU version: 120(bytes)
time stamp: 0x48f5d8
Step2 16-8
Error, try again.
>>If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.
Information:
If does not have the COM to choose, please the reset cable pinouts, or unload phone's battery and load phone's battery again.
If read/write 6600R,select 'Boot C recommended(6600R)'.
If read/write 6800,select 'Boot E recommended(6800)'.


Wait for connect...
Waiting for phone's response,press the Power on the phone...
User Terminate.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.


Wait for connect...
Waiting for phone's response,press the Power on the phone.
User Terminate.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.


Wait for connect...
Waiting for phone's response,press the Power on the phone..
CPU version: econd boot loader started ...
boot
Step2 16-8
Error, try again.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.
Please first choose the flash file.
Please first choose the flash file.


Wait for connect...
Waiting for phone's response,press the Power on the phone..
CPU version: econd boot loader started ...
boot
Step2 16-8
Error, try again.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.


Wait for connect...
Waiting for phone's response,press the Power on the phone..
User Terminate.
If prepares once more read-write phone, please unload the power supply clip or phone's battery, load again.


bro.do u know which cpu is it?If u know.pls try change a boot.then do it.and some NAND flash not support detect read lock code.so pls try read full flash file.when its pass show in software.
  Reply With Quote
Old 03-06-2009, 16:34   #3 (permalink)
No Life Poster
 
Join Date: Jan 2007
Location: Recife - Brazil
Posts: 568
Member: 434450
Status: Offline
Thanks Meter: 51
yes i know what is this cpu`s all is spredtrum changed the boot various times and nothing but i will try to read the full flash file as you tell and post the result
  Reply With Quote
Old 03-07-2009, 01:22   #4 (permalink)
No Life Poster
 
Join Date: Jan 2007
Location: Recife - Brazil
Posts: 568
Member: 434450
Status: Offline
Thanks Meter: 51
nothing again i try to read the flash,the software again cant boot the phone even i open the phone for see the which spreadtrum type, is 6600r i also try whitout the pinfinder i made the cable (i have good skill whit hardware i worked whit eletronic hardware over 20 years) whit pinouts finded by the pinfinder and nothing again, you can advice me please if is realy possible to work whit this phones whitout the cpfbox because apear that your software not work good whitout the box hardware because if dont realy work the dongle to me is became useless
  Reply With Quote
Old 03-07-2009, 02:04   #5 (permalink)
Freak Poster
 
gsmfans's Avatar
 
Join Date: Oct 2007
Location: phones-china 中国
Posts: 454
Member: 612230
Status: Offline
Thanks Meter: 330
Hi bro pls tell me ur phone flash ic type . and pls try Boot C . if not work pls contact my MSN [email protected]




B,R,.

gsmfans
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
6300 need rx and tx X-TRA Infinity-Box 7 01-15-2010 14:56
Lg kg288 rx and tx need HELP ME RIZWANJAT LG Hardware Repair 3 10-25-2009 08:44
SptBox RX and TX dont turn on. Can not found Modem port! 69eyes SPT BOX 3 10-23-2009 22:20
please help me with pinout rx,and tx of this china n95 flat with 1x5 mini usb port GOODNESS Chinese Models & Cloned Phones 0 05-24-2009 22:46
unable to find rx and tx ameho0102 MC-Tool 0 07-23-2008 13:00

 



All times are GMT +1. The time now is 13:43.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.34177 seconds with 8 queries

SEO by vBSEO