1208 Failed to read SP data [help] ## (ANSWERED)

[madni shah]

1. Full erase done ( uncheck safe erase and tick on whole flash chip)
2. Full flash done
3. Write Pm done

Problem same Failed to read SP data

Then,
4. Reset data 1
5. Erase whole chip
6. Again flash and write pm and write rpl

Problem still,Failed to read SP data


In hardware
7. I Change uem and write rpl.

Result

Phone Type: RH-105 
SW Version: V 5.91 27-03-09 RH-105 (c) NMP 
Imei plain: 35154504872990-8
Product Code: 0549920
Cellular System: GSM
ASIC ID: 0x2292, type: 0
Ppm Id: IA
Language Pack:
- not available.

 
Failed to read SP data

Any other way?

[sajidshah50]

Have you tried on best dongle via jaf.......if yes then Bro no other solution according to my knowledge

[gbluez]

DCT4 > Service > Imei & Security > Simlock > MARK Direct Unlock, Click Update SpLock.

[BIGUNLOCKSERVER]

Originally Posted by madni shah

1. Full erase done ( uncheck safe erase and tick on whole flash chip)
2. Full flash done
3. Write Pm done

Problem same Failed to read SP data

Then,
4. Reset data 1
5. Erase whole chip
6. Again flash and write pm and write rpl

Problem still,Failed to read SP data


In hardware
7. I Change uem and write rpl.

Result

Phone Type: RH-105 
SW Version: V 5.91 27-03-09 RH-105 (c) NMP 
Imei plain: 35154504872990-8
Product Code: 0549920
Cellular System: GSM
ASIC ID: 0x2292, type: 0
Ppm Id: IA
Language Pack:
- not available.

 
Failed to read SP data

Any other way?

in hardware chek charging connector,there is fbus ways to upp.

unit must be in (contect service)

try,will solve

[madni shah]

Originally Posted by gbluez

DCT4 > Service > Imei & Security > Simlock > MARK Direct Unlock, Click Update SpLock.

did,
Failed to read SP data
Imei net is empty, process aborted.

[borhan_chk]

repair flashar r not flashar change 100% ok

[Mohd Amjad]

Originally Posted by madni shah

1. Full erase done ( uncheck safe erase and tick on whole flash chip)
2. Full flash done
3. Write Pm done

Problem same Failed to read SP data

Then,
4. Reset data 1
5. Erase whole chip
6. Again flash and write pm and write rpl

Problem still,Failed to read SP data


In hardware
7. I Change uem and write rpl.

Result

Phone Type: RH-105 
SW Version: V 5.91 27-03-09 RH-105 (c) NMP 
Imei plain: 35154504872990-8
Product Code: 0549920
Cellular System: GSM
ASIC ID: 0x2292, type: 0
Ppm Id: IA
Language Pack:
- not available.

 
Failed to read SP data

Any other way?

Solution Hare
Mx Key Not Working This Fault
Use Jaf Box
1. First Full Erase
2. Flash With ver. 6.00
3. write Attached pm File
4. Then Unlock phone
5. Make Factory Setting
Your Problem 10000% Solve...........
Its Tested By Me

[Naeem123e]

Bro new file full flash use mxkey clik simlock update SPLock 100% ok

[gbluez]

Hi,
please look at the date. I think the phone is no more with him.

as last post from TS:

Failed to read SP data
Imei net is empty, process aborted.

this indicates IMEI corrupted. Need to rebuild first.

anyway, let's close this thread.

BR