3110c problem [SOLVED] - GSM-Forum

imran_panipat · 07-21-2010, 09:29

how 2 solve this problem

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8336(03-05-2010), 1.0.0.12955(03-05-2010)
Processing file: rm237__07.30.mcusw as MCU
[BB5,BB5 ALGORITHM] size: 14.49 MB
Supported RAP Ids: 0103192101001101, 010C192101001101
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
EM0 ID: 00000232
EM1 ID: 00000353
PUBLIC ID: 2010010A3C267E5612B416F7805ABEC3486428C9
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
FlashID0: 0089 8981 - 0000 0000 [Intel NU48F256,256 Mbits] type: NOR,RAP
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
RAP PAPUBKEYS is blank/erased.
Storing certificate ...OK
Erase size: 16.37 MB
CMT NOR area [00000000-000006BF] erased in 0.890 s
CMT NOR area [000006C0-0001FFFF] erased in 0.203 s
CMT NOR area [00020000-0007FFFF] erased in 1.312 s
CMT NOR area [00080000-000DFFFF] erased in 0.312 s
CMT NOR area [00100000-001FFFFF] erased in 0.531 s
CMT NOR area [00200000-0031FFFF] erased in 0.485 s
CMT NOR area [00320000-0105FFFF] erased in 3.485 s
CMT NOR area [01060000-01067FFF] erased in 0.265 s
CMT NOR area [01068000-0107FFFF] erased in 0.281 s
Flash programming ...
Error while programming [00] at 0xFFFFFFFF, Result: 0000
Please try to use newer flashloader.
Flashing terminated with error(s) in 49.891 s
RX Buffer: B372

jakkarzoya_2511 · 07-21-2010, 10:09

try to flash with usb on jaf

S!DD · 07-21-2010, 10:16

just flash it with USB with mx key.....100% solve this error....

imran_panipat · 07-21-2010, 10:21

Quote:

Originally Posted by S!DD

just flash it with USB with mx key.....100% solve this error....

if i try with usb on mxkey

Library version: 1.0.0.8336(03-05-2010), 1.0.0.12955(03-05-2010)
Processing file: rm237__07.30.mcusw as MCU
[BB5,BB5 ALGORITHM] size: 14.49 MB
Supported RAP Ids: 0103192101001101, 010C192101001101
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable,Battery back to device.
Insert Charger or Press phone's power button
Waiting for USB device ...
[ADL] Pooling for ADL device
[ADL] Device found: nmwcdnsuc\Nokia USB Flashing Generic, ID: 472EEA3
RAP SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
RAP EM0 ID: 00000232
RAP EM1 ID: 00000353
RAP PUBLIC ID: 2010010A3C267E5612B416F7805ABEC3486428C9
RAP ASIC MODE ID: 00
RAP ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
RAP ROM ID: 191EC665DFAAF68F
[ADL] Flashing CMT Update Server Data, ULO: 0x38C0 bytes
[ADL] Update Server code succesfully sent to phone.
[ADL] Flashing CMT Update Server Data, UPDAPP: 0x3DFC0 bytes
[ADL] Update Server code succesfully sent to phone.
[ADL] Flashing CMT Update Server Data, PASUBTOC: 0x4BF80 bytes
[ADL] Update Server code succesfully sent to phone.
[ADL] Pooling for ADL device
[ADL] Timeout, no usb device found.
Flashing terminated with error(s) in 35.141 s

m_mustakeem · 07-21-2010, 10:26

then hard wear problem check and post result ....................

subeesh1987 · 07-21-2010, 10:49

flash using jaf, or its better if you have external vpp cable.

imran_panipat · 07-21-2010, 12:04

Quote:

Originally Posted by subeesh1987

flash using jaf, or its better if you have external vpp cable.

brother what is external vpp cable

shh_903 · 07-21-2010, 13:01

Bro use USB cable try to flash on MX key ur problem ll be solved 100%

S!DD · 07-21-2010, 13:54

Quote:

Originally Posted by imran_panipat

if i try with usb on mxkey

Library version: 1.0.0.8336(03-05-2010), 1.0.0.12955(03-05-2010)
Processing file: rm237__07.30.mcusw as MCU
[BB5,BB5 ALGORITHM] size: 14.49 MB
Supported RAP Ids: 0103192101001101, 010C192101001101
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable,Battery back to device.
Insert Charger or Press phone's power button
Waiting for USB device ...
[ADL] Pooling for ADL device
[ADL] Device found: nmwcdnsuc\Nokia USB Flashing Generic, ID: 472EEA3
RAP SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
RAP EM0 ID: 00000232
RAP EM1 ID: 00000353
RAP PUBLIC ID: 2010010A3C267E5612B416F7805ABEC3486428C9
RAP ASIC MODE ID: 00
RAP ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
RAP ROM ID: 191EC665DFAAF68F
[ADL] Flashing CMT Update Server Data, ULO: 0x38C0 bytes
[ADL] Update Server code succesfully sent to phone.
[ADL] Flashing CMT Update Server Data, UPDAPP: 0x3DFC0 bytes
[ADL] Update Server code succesfully sent to phone.
[ADL] Flashing CMT Update Server Data, PASUBTOC: 0x4BF80 bytes
[ADL] Update Server code succesfully sent to phone.
[ADL] Pooling for ADL device
[ADL] Timeout, no usb device found.
Flashing terminated with error(s) in 35.141 s

just uninstall ur Nokia_Flashing_Cable_Driver and then again install it problem i think will b ok.......
try and post result....

imran_panipat · 07-22-2010, 08:03

Quote:

Originally Posted by S!DD

just uninstall ur Nokia_Flashing_Cable_Driver and then again install it problem i think will b ok.......
try and post result....

i do this but same error show

subeesh1987 · 07-23-2010, 06:09

external vpp cable is a special type cable. which have two connectors for giving 9 volt supply externaly.

shh_903 · 07-23-2010, 07:38

Quote:

Originally Posted by imran_panipat

i do this but same error show

Try to flash on usb cable using box jaf ur problem ll be solved 100%
i try many time

m_mustakeem · 07-23-2010, 07:42

flash in phoenix .....
and post result

debapra_gsm · 07-23-2010, 09:40

use 7 pin cable,rehot power ic. flash with mx-key .....post log

imran_panipat · 07-24-2010, 09:27

Quote:

Originally Posted by debapra_gsm

use 7 pin cable,rehot power ic. flash with mx-key .....post log

my problem will solve.i rehot flesh and power ic.flesh with mx ky

thanks

07-21-2010, 09:29	#1 (permalink)
imran_panipat No Life Poster Join Date: Nov 2006 Location: in heaven Posts: 1,327 Member: 397862 Status: Offline Thanks Meter: 176	3110c problem [SOLVED] how 2 solve this problem Using device: UFS_USB V2.8 (c) SarasSoft 2007. Library version: 1.0.0.8336(03-05-2010), 1.0.0.12955(03-05-2010) Processing file: rm237__07.30.mcusw as MCU [BB5,BB5 ALGORITHM] size: 14.49 MB Supported RAP Ids: 0103192101001101, 010C192101001101 RAP Data : SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1] EM0 ID: 00000232 EM1 ID: 00000353 PUBLIC ID: 2010010A3C267E5612B416F7805ABEC3486428C9 ASIC MODE ID: 00 ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1 ROM ID: 191EC665DFAAF68F SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00 Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002 FlashID0: 0089 8981 - 0000 0000 [Intel NU48F256,256 Mbits] type: NOR,RAP ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000 TransmissionMode: 16Bit Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0 Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002 RAP PAPUBKEYS is blank/erased. Storing certificate ...OK Erase size: 16.37 MB CMT NOR area [00000000-000006BF] erased in 0.890 s CMT NOR area [000006C0-0001FFFF] erased in 0.203 s CMT NOR area [00020000-0007FFFF] erased in 1.312 s CMT NOR area [00080000-000DFFFF] erased in 0.312 s CMT NOR area [00100000-001FFFFF] erased in 0.531 s CMT NOR area [00200000-0031FFFF] erased in 0.485 s CMT NOR area [00320000-0105FFFF] erased in 3.485 s CMT NOR area [01060000-01067FFF] erased in 0.265 s CMT NOR area [01068000-0107FFFF] erased in 0.281 s Flash programming ... Error while programming [00] at 0xFFFFFFFF, Result: 0000 Please try to use newer flashloader. Flashing terminated with error(s) in 49.891 s RX Buffer: B372

07-21-2010, 10:09	#2 (permalink)
jakkarzoya_2511 No Life Poster Join Date: Oct 2007 Location: IN MOBILES Posts: 1,199 Member: 613242 Status: Offline Sonork: 100.1626311 Thanks Meter: 645	hello bro try to flash with usb on jaf

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6150 Lock Problem	Zeljko	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-16-2013 08:16
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-18-2006 15:21
6110 5.47 sw unlock problem	gsms	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-21-1999 19:43
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44

07-21-2010, 10:16	#3 (permalink)
S!DD Freak Poster Join Date: Oct 2009 Location: HEART OF !ND!A. JABALPUR Age: 30 Posts: 406 Member: 1150164 Status: Offline Sonork: 100.1593001 Thanks Meter: 55	just flash it with USB with mx key.....100% solve this error....

07-21-2010, 10:26	#5 (permalink)
m_mustakeem No Life Poster Join Date: Nov 2009 Location: India Posts: 1,159 Member: 1152038 Status: Offline Thanks Meter: 257	then hard wear problem check and post result ....................

07-21-2010, 10:49	#6 (permalink)
subeesh1987 Freak Poster Join Date: Jan 2009 Location: india, delhi Age: 36 Posts: 255 Member: 940655 Status: Offline Sonork: 1587842 Thanks Meter: 44	flash using jaf, or its better if you have external vpp cable.

07-21-2010, 13:01	#8 (permalink)
shh_903 No Life Poster Join Date: Nov 2006 Location: Lahore Posts: 1,669 Member: 392149 Status: Offline Thanks Meter: 199	Bro use USB cable try to flash on MX key ur problem ll be solved 100%

07-23-2010, 06:09	#11 (permalink)
subeesh1987 Freak Poster Join Date: Jan 2009 Location: india, delhi Age: 36 Posts: 255 Member: 940655 Status: Offline Sonork: 1587842 Thanks Meter: 44	external vpp cable is a special type cable. which have two connectors for giving 9 volt supply externaly.

07-23-2010, 07:42	#13 (permalink)
m_mustakeem No Life Poster Join Date: Nov 2009 Location: India Posts: 1,159 Member: 1152038 Status: Offline Thanks Meter: 257	flash in phoenix ..... and post result

07-23-2010, 09:40	#14 (permalink)
debapra_gsm Freak Poster Join Date: Feb 2010 Posts: 176 Member: 1247853 Status: Offline Thanks Meter: 71	use 7 pin cable,rehot power ic. flash with mx-key .....post log