New at MXBOX, Cant Unlock Via USB.. - GSM-Forum

prefix2009 · 10-07-2012, 14:19

Hey, just recived MXBOX Orange full activated.
Installed mobilex v3.5 rev2.3.
I want to unlock Nokia 6280 via USB.

I have installed all drivers. enter to mobileEx program, choosed:
"HTI Plus Flasher Interface " and connect, then Clicked twice on Nokia Service tool. then "Scan"
And It's not scanning the phone. I'm using USB Cable(DKU-2) For Nokia 6280.
It's not reading the phone. what can it be ?

Quote:

Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7601.17514
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14195(13-07-2012)
ERROR: Packet Error(0xAA), code 0xC0000002
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
Bad contact, TX line remains low !
VCC_PH BSI TX RX RX2 CLK
1 0 0 1 1 0
ERROR: bootstrap failed!

.::ZUBER::. · 10-07-2012, 14:39

Check USB Cable & Connectivity between Phone & Cable,

Try Use FBus Cable for this Phone operations,
Post reply.

BR,
ZUBER

e9y · 10-07-2012, 14:42

Don't choose interfase as "HTI flasher interface". Choose Usb as interface

prefix2009 · 10-07-2012, 14:48

Quote:

Originally Posted by e9y

Don't choose interfase as "HTI flasher interface". Choose Usb as interface

I dont have usb as Interface listed.

tolski · 10-07-2012, 14:54

use tiger cable for good detection.

prefix2009 · 10-07-2012, 15:13

Also tried Nokia N86 Via USB Cable CA-101 and the program cannot read phone!

Quote:

MXKEY [MxKey Team HTI PLUS Flasher Interface 0], SN: C0859E70
Using device: HTI, FW ver: 00.50, SN: 0100677E
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7601.17514
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012)
ERROR: Packet Error(0xAA), code 0xC0000002
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
Bad contact, TX line remains low !
VCC_PH BSI TX RX RX2 CLK
1 0 0 1 1 0
ERROR: bootstrap failed!

.::MASTER ALONE::. · 10-07-2012, 16:36

Quote:

Originally Posted by prefix2009

Also tried Nokia N86 Via USB Cable CA-101 and the program cannot read phone!

[/B][/COLOR][/SIZE][/COLOR][/SIZE]

it's Fbus selection not a usb.

go to phone usb tab OR select model after install driver listed do job done.

BR.
Arsalan gsm2000.

10-07-2012, 14:39	#2 (permalink)
.::ZUBER::. No Life Poster Join Date: Apr 2006 Location: MXBOX THUNDER Helpdesk Age: 50 Posts: 4,273 Member: 262425 Status: Offline Sonork: 100.1617691 Thanks Meter: 1,264	Check USB Cable & Connectivity between Phone & Cable, Try Use FBus Cable for this Phone operations, Post reply. BR, ZUBER

10-07-2012, 14:42	#3 (permalink)
e9y No Life Poster Join Date: Jul 2009 Location: Moldova Age: 39 Posts: 512 Member: 1083142 Status: Offline Thanks Meter: 51	Don't choose interfase as "HTI flasher interface". Choose Usb as interface

10-07-2012, 14:54	#5 (permalink)
tolski No Life Poster Join Date: Jul 2003 Posts: 1,064 Member: 34750 Status: Offline Thanks Meter: 177	use tiger cable for good detection.