5230 RM-588 Security test failed - how to solve the problem

[zaworek]

Hello,

after PM 1, 309,
I have no backup
below log from mobileEX:

Phone Type: RM-588 (Nokia 5230)
SW Version: V ICPR72_10w42.2 26-11-10 RM-588 (c) Nokia 
Imei plain: xxxxxxxxxxxxxxxxxxxx  (is ok)
Product Code: 0585610
ApeCoreSw: V 40.0.003
Language Pack:
- not available.

This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !
 
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
 
 
Imei net: xxxxxxxxxxxxxxxxxx (is ok)
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
 
BLOCK 1:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF 
BLOCK 2:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF 
BLOCK 3:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF 
BLOCK 4:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF 
BLOCK 5:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF 
BLOCK 6:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF 
BLOCK 7:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF 
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0C9001054BA6005200C4FEE5B9759A9C376D205E
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 9.50.0 revision: 2.0 size: 0x3B40
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FlashID0: 0400 0000  - 0000 0000 [unused/removed] type: NOR,CMT 
FlashID1: 0000 0001  - 0000 0000 [unused/removed] type: NOR,CMT 
FlashID2: 00EC 0040  - 0000 0231 [Samsung 2Gb DDP OneNAND,2 Gbits] type: MuxOneNAND,CMT 
 Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5]  version: 9.50.0 revision: 2.0 size: 0x70C62
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
CMT PAPUBKEYS HASH: 7DC72D3FDC552426A4479BC820097D304CFB6C15
Reading CMT NPC  (0x168 bytes)
Original Product Code: 0589044
Reading CMT VARIANT  (0x0 bytes)
Reading CMT CCC  (0xD4 bytes)
 Product Code: 610C
Product Code missmatch !
Reading CMT HWC  (0xD4 bytes)
 Product Code: 0589044
HWC seems to be valid

I see that the problem is here:

Reading CMT NPC  (0x168 bytes)
Original Product Code: 0589044
Reading CMT VARIANT  (0x0 bytes)
Reading CMT CCC  (0xD4 bytes)
 Product Code: 610C
Product Code missmatch !
Reading CMT HWC  (0xD4 bytes)
 Product Code: 0589044
HWC seems to be valid

Does anyone have a good rpl file without NPC data for this model?

[axecom]

Do a pmm auth and then Write pm 1 and 309

[Hamidshah07]

write pm 1 and 308 ur problem well save ,i tested 5310 ver 59.xx with mx key

[.::Dr.Gsm::.]

Originally Posted by Hamidshah07

write pm 1 and 308 ur problem well save ,i tested 5310 ver 59.xx with mx key

are u mad if u don't know about 308 then no comment

only write 1,309

[.::Dr.Gsm::.]

here is Pm Without 120 and 308 data

http://www.********.com/download/2780274/5230_RM-588_full.pm

[zaworek]

Originally Posted by axecom

Do a pmm auth and then Write pm 1 and 309

read carefully
i wrote that the phone is after PM 1 and 309

the problem still exists

Regards,
Zaworek

[axecom]

Dont touch the 308!!! u will corrupt simlock data!!!
The best solution is :
tick "Load RFBB from server!!then Do a PMM auth !
Then write ( it will write Pm(1 and 309) from the server!! [better than downloading one from unknown provider]
GD luCk

[axecom]

There is no way that ur problem still exist!! rescan again!
if the same! flash ur phone with the latest version (40.6.3) then do the steps again!

[zaworek]

Originally Posted by .::Dr.Gsm::.

here is Pm Without 120 and 308 data

http://www.********.com/download/2780274/5230_RM-588_full.pm

thank's but still the same :

Reading CMT NPC  (0x168 bytes)
Original Product Code: 0589044
Reading CMT VARIANT  (0x0 bytes)
Reading CMT CCC  (0xD4 bytes)
 Product Code: 610C
Product Code missmatch !
Reading CMT HWC  (0xD4 bytes)
 Product Code: 0589044
HWC seems to be valid

[mindhunter_2005]

Do PM Auth and Write Modified PM and your set will be ok.i tried on many phones.

[zaworek]

Originally Posted by mindhunter_2005

Do PM Auth and Write Modified PM and your set will be ok.i tried on many phones.

From where download a tested modified pm file for this model?

[zaworek]

Originally Posted by salmanprienc

Phone Type: RM-217 (Nokia 6300)
SW Version: V 07.21 05-11-08 RM-217 (c) Nokia.
Imei plain: 12345610654321-?
Product Code: 0538331
Language Pack:
- not available.


Imei plain is invalid !!!
Imei net: 12345610654321?
Version: SIMLOCK SERVER VERSION 63
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

Why you wrote in my thread? It's not the same problem!

[enzawigroup]

Imei plain: 12345610654321-?
u need rpl or if u have the orginal pm




br