5800d user code problem.

[Joey888]

Hi all,
I have a 5800 xpressmusic which is protected by user lock.
I do fullfactory reset, but the phone won't accept 12345 as correct lock code. what is the default lockcode, what's wrong with this handset?

Version Info:
MCU SW version:  V ICPR72_08w47.1 23-01-09 RM-356 (c) Nokia
HW version:  1101
RFIC version:   17141715
DSP version:   ICPR72_08w47
Retu version:  15
Tahvo version:  22
WLAN ID: :  00 BC C4 71 7C 24 
Bluetooth ID: :  00 24 7C 71 76 9C
DVB-H receiver Bootloader version:   vq 
Product Info:
Production serial number:  CBI936146
Product code:  0577493
Basic production code:  0552692
Long production SN:  0
Serial Numbers:
IMEI plain:  35320
IMEI spare to net:  3A 35 02 05 23 88 55 09 
IMEI SV to net:  33 35 02 05 23 88 55 39 F9 
NCK: Other Info:
Model :  Nokia 5800 XpressMusic (Classic Phone)
CS type :  GSM850/GSM900/GSM1800/GSM1900/WCDMA I/WCDMA VIII
BSI: 5.8 KOhm
 
Imei net: 35320
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
 
BLOCK 1:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

[shak409]

try 00000. when i did full facotry on 3109c. it didnt ask for hte code at the startup again

[Shensohau]

Hi, Try this, go to the phone settings in service option, tilt the option full factory, check the do the jobs option and wait, if it failed, turn off the phone, then press at the same time green + red + camera button and turn on the phone without release until the nokia logo appear in the screen, that's it! good luck!!!!

[Joey888]

Originally Posted by Shensohau

Hi, Try this, go to the phone settings in service option, tilt the option full factory, check the do the jobs option and wait, if it failed, turn off the phone, then press at the same time green + red + camera button and turn on the phone without release until the nokia logo appear in the screen, that's it! good luck!!!!

I can't go any further than input lockcode. phone is locked at startup.
I already tried "green + red + camera" trick many times, it seems not working.
I reset with HWK, JAF, MXKEY, it seems 12345 is not the default lockcode.
00000 neither.

[Shensohau]

flash with a superior new firmware, and put the logs!!!

[bluetut]

we have the same problem bro.at startup lock code appear...i flash it with highest version available and full factory but still the same....anyone encounter this problem and solve it

[bluetut]

problem solve,,i flash it using jaf 64(not defective jaf by any other tools) with higher version...