6600i Slide error flashing on Mxkey - GSM-Forum

yobb · 12-07-2009, 13:41

Phone is ok before, the only problem is when connecting on internet, it log.

tried to flash on mxkey but error occurs, tried ufs and jaf interface tried enable/disable rx2 but same problem.

Unit become dead after error, but so insane i flash in a crack jaf verion 63, although got some error but phone alive

Code:

Version from phone: 36.16
Version from file: 36.16
Using device: J.A.F, FW ver: 01.B1
Library version: 1.0.0.11446, Date: 25-11-2009
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101023000 
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1F9000140C877D56868E8241A652B33E89752958
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
 SecondaryBoot: rap3gv3_2nd.fg [BB5]  version: 1.30.0 revision: 0.0 size: 0x3C00
FlashID0: 00EC 220C  - 0000 8921 [Samsung K8F1215ETM,512 Mbits] type: NOR,RAP 
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000 
ExtDEVC: FFFF 0000 - 0000 0000
 Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM]  version: 1.40.0 revision: 0.0 size: 0x22C10
RAP PAPUBKEYS HASH: 40B30662F0538F4388DA69756F1703C54DE5076E
Reading RAP NPC (0x168 bytes).
Reading RAP VARIANT (0x0 bytes).
Reading RAP CCC (0x160 bytes).
Reading RAP HWC (0xD4 bytes).
Flash Imei: 35524903480885
RPL saved to "C:\mobileEx\3.3\data\backup\RPL\BB5_35524903480yobb_BACK.rpl" 
Processing file: rm570__36.16.mcusw as MCU 
 [BB5,XSR 1.5]  size: 23.27 MB
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101023000 
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1F9000140C877D56868E8241A652B33E89752958
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
 SecondaryBoot: rap3gv3_2nd.fg [BB5]  version: 1.30.0 revision: 0.0 size: 0x3C00
FlashID0: 00EC 220C  - 0000 8921 [Samsung K8F1215ETM,512 Mbits] type: NOR,RAP 
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000 
ExtDEVC: FFFF 0000 - 0000 0000
 Algorithm: RAP3Gv3_algo_xsr15.fg [XSR 1.5]  version: 1.40.0 revision: 0.0 size: 0x26CB8
RAP PAPUBKEYS HASH: 40B30662F0538F4388DA69756F1703C54DE5076E
Storing certificate ...OK
Total erase size: 25.37 MB
CMT NOR area [00000000-0001FFFF]
CMT NOR area [00040000-000BFFFF]
CMT NOR area [000C0000-0013FFFF]
CMT NOR area [01780000-0197FFFF]
CMT NOR area [00140000-0177FFFF]
erased in 1 min 12.250 s
Flash programming ...
Error while programming [00] at 0x000A0400, Result: 0000
Flashing terminated with error(s) in 4 min 36.609 s
RX Buffer:

Flashing on JAF

Code:

JAF version 1.98.63
Detected PKEY: 90009A0E
Card life counter: 99.99%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.17.0
Changing mode...Done!
Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101023000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1F9000140C877D56868E8241A652B33E89752958
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Done!
Restarting phone...Done!
Setting local mode...
Failed! Aborting!
Powering the phone...
Failed! Aborting!
Fast phone flashing selected.
Fast phone flashing disabled.
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\products\RM-570\rm570__36.16.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\products\RM-570\rm570__36.16.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\products\RM-570\rm570__36.16.ppm_a
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\products\RM-570\rm570__36.16.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\products\RM-570\rm570__36.16.ppm_a
CNT Flash file: C:\Program Files\Nokia\Phoenix\products\RM-570\rm570__36.16_ISM_002.image_c_de_silver_o2_de_silver
APE Variant file: NONE
Backing up CRT data...
Setting FLASH MODE
FAST PHONE detected!
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Reading CMT NPC certificate...
Reading CMT VARIANT certificate...
VARIANT CRT not available...
Reading CMT CCC certificate...
Reading CMT HWC certificate...
Saved to C:\Program Files\ODEON\JAF\ProgData\35524903480885_CRT_backup_1947712.rpl
Backup CRT OK!
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101023000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1F9000140C877D56868E8241A652B33E89752958
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo_xsr15.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 6 seconds...
Sending CRT data...
No convertion block detected or file already converted.
Erasing...
Operation took 0 minutes 8 seconds...
Writing...
Stage 1
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
Sending CMT PUB KEYS...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101023000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1F9000140C877D56868E8241A652B33E89752958
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo_xsr15.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 4 seconds...
Sending CRT data...
Stage 1
Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101023000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1F9000140C877D56868E8241A652B33E89752958
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo_xsr15.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 5 seconds...
Sending CRT data...
Stage 1
Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101023000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1F9000140C877D56868E8241A652B33E89752958
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo_xsr15.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 5 seconds...
Sending CRT data...
Stage 1
FAST MODE finish!
Operation took 15 minutes 1 seconds...
Reseting phone...
PPM: C:\Program Files\Nokia\Phoenix\products\RM-570\rm570__36.16.ppm_a

Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101023000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1F9000140C877D56868E8241A652B33E89752958
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo_xsr15.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 4 seconds...
No convertion block detected or file already converted.
Erasing...
Operation took 0 minutes 23 seconds...
Writing...
Stage 1
Error resetting phone...
Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101023000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1F9000140C877D56868E8241A652B33E89752958
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo_xsr15.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 16 seconds...
Stage 1
Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101023000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1F9000140C877D56868E8241A652B33E89752958
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo_xsr15.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 4 seconds...
Stage 1
FAST MODE finish!
Operation took 4 minutes 46 seconds...
Reseting phone...
CNT: C:\Program Files\Nokia\Phoenix\products\RM-570\rm570__36.16_ISM_002.image_c_de_silver_o2_de_silver

Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101023000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1F9000140C877D56868E8241A652B33E89752958
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 5 seconds...
No convertion block detected or file already converted.
Erasing...
Operation took 1 minutes 32 seconds...
Writing...
Stage 1
Error resetting phone...
Booting phone...
Unknown field ID!
Error sync the phone...
Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101023000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1F9000140C877D56868E8241A652B33E89752958
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220C00EC <=> SAMSUNG (SEC) -> K5G1257ATM
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Done!
Restarting phone...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 36.16
27-09-09
RM-570
(c) Nokia
HW version: 1000
PCI version:
RFIC version: 17141715
DSP version: SPR72_vs08w40
LCD version: SHARP
PPM version: V 36.16
27-09-09
RM-570
(c) Nokia
A
BT MCM version: 2222-sm143C
Retu version: 15
Tahvo version: 22
Content Pack version: Content: c_de_silver
O2 DE
27-09-09
RM-570
(c) Nokia

Production serial number: CQG201580
Product code: 0583399
Module code: 0204287
Basic production code: 0579414
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 355249034808851
IMEI spare to net: 3A 55 42 09 43 08 88 05
IMEI SV to net: 33 55 42 09 43 08 88 45 F6

LOCK STATUS:

CONFIG KEY: 8000000000000002
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-570.ini
Saved INI not found, loading INI list...
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\

Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Done!

What suppose to be the problem?

ak72342 · 12-07-2009, 13:57

Uninstall mxkey and also delete mx key folder fron drive c: Then install it again and select bb5 befor flashing.............

Ak

yobb · 12-07-2009, 14:01

@ak72342

Not a solution my friend, I installed mxkey on 2 pc same error

ak72342 · 12-07-2009, 14:24

........................................ ...
\/\/\/\/\/\/

AK

Quote:

Originally Posted by yobb

@ak72342

Not a solution my friend, I installed mxkey on 2 pc same error

yobb · 12-07-2009, 14:59

When JAF flash the phone it become alive, but by pressing its menu or browsing it, it blinks.

Cyclone got the catch! DONE by this tool hope mx will improved it next time

Logs from cyclone, the only weak from cyclone is, cannot flash the phone on dead state, JAF can but with errors.

Quote:

Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1F9000140C877D56868E8241A652B33E89752958
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_ROM_ID: 273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 40B30662F0538F4388DA69756F1703C54DE5076E
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Backing up simlock...
MCU Version V 36.16
MCU Date 27-09-09
Product RM-570
Manufacturer (c) Nokia
IMEI 35524903480yobb
Mastercode 1143256447
Simlock backup OK, saved to RM-570_355249034808851_1272009_92013 PM.SLBackup.PM
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm570__36.16.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1F9000140C877D56868E8241A652B33E89752958
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_ROM_ID: 273F6D55DFAAF68F
rm570__36.16.mcusw, Type: Flash Image, Algo: BB5, XSR 1.5
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_xsr15.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 40B30662F0538F4388DA69756F1703C54DE5076E
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x01780000-0x0197FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0177FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 72.234s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 870.734s
Restarting MCU...
Processing rm570__36.16.mcusw (APE)...
Processing rm570__36.16.ppm_c (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1F9000140C877D56868E8241A652B33E89752958
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_ROM_ID: 273F6D55DFAAF68F
rm570__36.16.ppm_c, Type: Flash Image, Algo: BB5, XSR 1.5
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_xsr15.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 40B30662F0538F4388DA69756F1703C54DE5076E
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01980000-0x021BFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 20.953s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 277.266s
Restarting MCU...
Processing rm570__36.16.ppm_c (APE)...
Processing rm570__36.16_ISM_003.image_c_nl_black_ctv_be_black (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1F9000140C877D56868E8241A652B33E89752958
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_ROM_ID: 273F6D55DFAAF68F
rm570__36.16_ISM_003.image_c_nl_black_ctv_be_black , Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 40B30662F0538F4388DA69756F1703C54DE5076E
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x02620000-0x03F9FFFF, NOR
EraseArea[0,CMT]: 0x021C0000-0x0261FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 70.343s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 70.718s
Restarting MCU...
Processing rm570__36.16_ISM_003.image_c_nl_black_ctv_be_black (APE)...
All images processed OK! Processing post flash tasks...
Reading info...
MCU Version V 36.16
MCU Date 27-09-09
Product RM-570
Manufacturer (c) Nokia
IMEI 35524903480yobb
Mastercode 1143256447
IMEI Spare 3A5542094308yobb
IMEI SV 33554209430yobb5F6000000
PPM V 36.16, 27-09-09, RM-570, (c) Nokia , C
CNT Content: ctv_be_black, V 36.16, 27-09-09, RM-570, (c) Nokia , ,
PSN CQG201580
Product Code 0583399
Module Code 0204287
Basic Product Code 0579414
PSD 0000000000000000
LPSN 0
RETU 15
TAHVO 22
AHNE 30
HW 1000
RFIC 17141715
DSP SPR72_vs08w40
LCD SHARP
BT 2222-sm143C
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 8000000000000002
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Riteshgpt60 · 12-07-2009, 15:03

Hello, did you change other cable...might be cable problem

yobb · 12-08-2009, 03:17

Quote:

Originally Posted by Riteshgpt60

Hello, did you change other cable...might be cable problem

Cable is 101% ok!

BTW, phone is ok

gbluez · 12-08-2009, 04:29

thanks yobb, will investigate it.
we need this kind report, include some comparation also.

best regards.

rakesh15 · 12-08-2009, 04:35

try with usb flashing
if poblem remain same
use other tool

Abelardz23 · 12-08-2009, 04:38

Yesterday I flashed n77 in mxkey..unluckily became blue screen or hang at that point..

then I flashed with JAF...luckily the phone is alive considering I was using the same flash file..

This 3.3 rev1 is Full of Bugs..I dont trust MXKEY software at this point in time..especially in flashing..

Then they will sell mxkey 2010 with the same features...what a shame...

Denozaur · 12-16-2009, 15:19

6600i fbus flash only ppm whith UFS erorr 100%
6600i fbus flash only ppm whith MxKey erorr 100%
6600i fbus flash only ppm whith UNI erorr 100%
6600i fbus flash only ppm whith JAF 1.98.62 old software bat 100% OK

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"e-72"-dead after flashing on mxkey? (ANSWERED)	jasimbinrashid	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	9	04-04-2011 04:27
Error n-gage flashing on mxkey >>>>>	debmobile	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	3	11-24-2009 19:03
W850i error flashing on 64%	mahcin	Sony Ericsson	2	01-11-2008 01:37
Error flashing on R3C004 china 2 Error 3516	MicrostarGSM®	DIV	4	12-18-2003 09:21

12-07-2009, 13:57	#2 (permalink)
ak72342 No Life Poster Join Date: Jul 2008 Location: ::::...I LOVE PAKISTAN...:::: Posts: 1,257 Member: 823250 Status: Offline Sonork: 100.1587800 Thanks Meter: 187	Uninstall mxkey and also delete mx key folder fron drive c: Then install it again and select bb5 befor flashing............. Ak

12-07-2009, 14:01	#3 (permalink)
yobb No Life Poster Join Date: Aug 2006 Posts: 1,133 Member: 337450 Status: Offline Thanks Meter: 718	@ak72342 Not a solution my friend, I installed mxkey on 2 pc same error

12-07-2009, 15:03	#6 (permalink)
Riteshgpt60 No Life Poster Join Date: Jul 2009 Location: India Posts: 2,857 Member: 1086393 Status: Offline Thanks Meter: 771	Hello, did you change other cable...might be cable problem

12-08-2009, 04:29	#8 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	thanks yobb, will investigate it. we need this kind report, include some comparation also. best regards.

12-08-2009, 04:35	#9 (permalink)
rakesh15 No Life Poster Join Date: Apr 2009 Location: gadgets works station Posts: 1,606 Member: 1019591 Status: Offline Sonork: 100.1592733 Thanks Meter: 634	try with usb flashing if poblem remain same use other tool

12-08-2009, 04:38	#10 (permalink)
Abelardz23 Freak Poster Join Date: Oct 2003 Location: Philippnes,Pasig City Posts: 338 Member: 42165 Status: Offline Thanks Meter: 35	Yesterday I flashed n77 in mxkey..unluckily became blue screen or hang at that point.. then I flashed with JAF...luckily the phone is alive considering I was using the same flash file.. This 3.3 rev1 is Full of Bugs..I dont trust MXKEY software at this point in time..especially in flashing.. Then they will sell mxkey 2010 with the same features...what a shame...

12-16-2009, 15:19	#11 (permalink)
Denozaur No Life Poster Join Date: Apr 2005 Age: 44 Posts: 681 Member: 136052 Status: Offline Thanks Meter: 75	6600i fbus flash only ppm whith UFS erorr 100% 6600i fbus flash only ppm whith MxKey erorr 100% 6600i fbus flash only ppm whith UNI erorr 100% 6600i fbus flash only ppm whith JAF 1.98.62 old software bat 100% OK