Always Error Dct4 Flashing...

[adnon]

I get always error while flashing dct4 sets... and I have no problem with bb5....

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8929(24-06-2010), 1.0.0.14574(24-06-2010)
ASIC ID: 0x2142 [UPP_8M ver: 4.2 or 4.3]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.79.0 revision: 0.7 size: 0x9D8
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0089 8809 [Intel 28F128L18,128 Mbits] page size: 128 K type: NOR area: 01000000-01FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u_intel.fia [DCT4 ALGORITHM] version: 4.80.0 revision: 0.7 size: 0x5718
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 0094F2FA:2984DA60
ASIC type: 2
UEM Imei: 35839900740705
Flash Imei: 35839900740705
RPL saved to "C:\mobileEx\3.4\data\backup\RPL\35839900740705_BA CK.rpl"
Processing file: rm127__05.220 as MCU
[DCT4,DCT4 ALGORITHM] size: 8.60 MB
Supported Ids: 1131, 1130, 2140, 2141, 2142, 2143, 3161, 3160
ASIC ID: 0x2142 [UPP_8M ver: 4.2 or 4.3]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.79.0 revision: 0.7 size: 0x9D8
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0089 8809 [Intel 28F128L18,128 Mbits] page size: 128 K type: NOR area: 01000000-01FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u_intel.fia [DCT4 ALGORITHM] version: 4.80.0 revision: 0.7 size: 0x5718
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 0094F2FA:FB2EDA60
Area [01000000-0101FFFF] erased in 1.250 s
Area [01020000-018BFFFF] erased in 1 min 18.812 s
Area [01E60000-01FDFFFF] erased in 13.594 s
Flash programming ...
Programming completed in 6 min 58.890 s
File Processed in 8 min 41.484 s
Processing file: rm127__05.22.image_e_black as CNT
[DCT4,DCT4 ALGORITHM] page size: 64 K size: 1.69 MB
Supported Ids: 1131, 1130, 2140, 2141, 2142, 2143, 3161, 3160
ASIC ID: 0x2142 [UPP_8M ver: 4.2 or 4.3]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.79.0 revision: 0.7 size: 0x9D8
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
BootLoader not responding, mostly RAM problem !
flashing terminated !
Flashing terminated with error(s) in 9 min 51.656 s
RX Buffer: F372

[>>.123.<<]

Originally Posted by adnon

I get always error while flashing dct4 sets... and I have no problem with bb5....

ceck in DCTxBB5 same
this ufs problem..................100% test by me
i have sam probem