C1 00 Rm 689 dead after flash (ANSWERED)

[denny86]

plz help any body

My Nokia C1 00 Rm 689 dead after flash

[denny86]

MXKEY Serial: [MxKey HTI FLASHER INTERFACE 9] - C0803DA4
Using device: HTI BOX, FW ver: 00.08
Driver: FTDIBUS, ver: 2.6.0.0, NTMP ver: 2.6.2.0
Module ver: 1.0.0.16978(13-05-2011), Library ver: 1.0.0.10071(13-05-2011)
Do not disconnect or abort this operation otherwise phone will be damaged.
Device synchronized.
CPU: XGOLD 110
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.19
EBL version : Default_RAM_Bootloader
Set baud rate to: 921600
Flash ID: 00EC 2254 [Samsung K8S6415ETC,64 Mbits]
Processing file: rm689_003.000
Downloading item CODE:hw_s01_rm689_r03.000.fls, num block: 3, size: 4.11 MB
Erasing area 0x00800000-0x00A0FFFE ...OK
Programming completed in 51.164 s
Erasing area 0x00C60000-0x00E6A87E ...OK
Programming completed in 50.783 s
Erasing area 0x00FFC000-0x00FFC03E ...OK
Programming completed in 0.210 s
Checksum verified (0x446F)
Processing file: rm689_003.00ij
Downloading item CUST:hw_s01_rm689_003.00ij.fls, num block: 1, size: 1.88 MB
Erasing area 0x00210000-0x003EF7FE ...OK
Programming completed in 47.398 s
Checksum verified (0x6BD4)
Processing file: rm6890_nai03.00ij
Downloading item CUST:hw_s01_rm6890_nai03.00ij.fls, num block: 1, size: 327.45 KB
Erasing area 0x00EB0000-0x00F010BE ...OK
Programming completed in 8.122 s
Checksum verified (0xD7EA)
Total time for flashing process(boot+erase+write) was 3 min 40.748 s

Phone not responding !

[gbluez]

and what is the initial problem? just flash it and died?
try to use different firmware version.

BR