C1 RM-689 Flashing completed but still NO power

[PedaLBoard]

Hi
I have nokoia C1, this phone is not turning ON
I Flash it to version 3.00 but I got this error

Phone not responding !

Logs

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9019(20-11-2010), 1.0.0.15042(20-11-2010)
Do not disconnect or abort this operation otherwise phone will be damaged.
Device synchronized.
CPU ID: A200341100 [X-GOLD 110]
Sending Primary Boot Loader ...OK
Changing baudrate to: 921600
Sending Secondary Boot Loader ...OK
BootloaderString: SE0_091125  F11
Boot mode: CC
EBL version: 10.13, Default_RAM_Bootloader
Flash ID: 00EC 2254 [Samsung K8S6415ETC,64 Mbits]
Processing CODE:hw_s01_rm689_r03.000.fls from file rm689_003.000
Erasing area 0x00800000-0x00A0FFFE ...OK
Programming ...
Programming completed in 53.000 s
Erasing area 0x00C60000-0x00EAFFFE ...OK
Programming ...
Programming completed in 43.657 s
Erasing area 0x00FFC000-0x00FFFFFE ...OK
Programming ...
Programming completed in 0.047 s
Checksum OK (0x6F44)
Processing CUST:hw_s01_rm689_003.00ij.fls from file rm689_003.00ij
Erasing area 0x00210000-0x0045FFFE ...OK
Programming ...
Programming completed in 38.265 s
Checksum OK (0xD46B)
Processing CUST:hw_s01_rm6890_nai03.00ij.fls from file rm6890_nai03.00ij
Erasing area 0x00EB0000-0x00F7FFFE ...OK
Programming ...
Programming completed in 6.422 s
Checksum OK (0xEAD7)
Flashing completed in 3 min 18.406 s
 
Phone not responding !

I decided to Flash Lower version 2.600


Logs

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9019(20-11-2010), 1.0.0.15042(20-11-2010)
Do not disconnect or abort this operation otherwise phone will be damaged.
Device synchronized.
CPU ID: A200341100 [X-GOLD 110]
Sending Primary Boot Loader ...OK
Changing baudrate to: 921600
Sending Secondary Boot Loader ...OK
BootloaderString: SE0_091125  F11
Boot mode: CC
EBL version: 10.13, Default_RAM_Bootloader
Flash ID: 00EC 2254 [Samsung K8S6415ETC,64 Mbits]
Processing CODE:hw_s01_rm689_r02.600.fls from file rm689_002.600
Erasing area 0x00800000-0x00A0FFFE ...OK
Programming ...
Programming completed in 49.860 s
Erasing area 0x00C60000-0x00EAFFFE ...OK
Programming ...
Programming completed in 41.813 s
Erasing area 0x00FFC000-0x00FFFFFE ...OK
Programming ...
Programming completed in 0.047 s
Checksum OK (0x9AAF)
Processing CUST:hw_s01_rm689_002.60ia.fls from file rm689_002.60ia
Erasing area 0x00210000-0x0045FFFE ...OK
Programming ...
Programming completed in 40.750 s
Checksum OK (0xE090)
Processing CUST:hw_s01_rm6890_nai02.60ia.fls from file rm6890_nai02.60ia
Erasing area 0x00EB0000-0x00F7FFFE ...OK
Programming ...
Programming completed in 6.563 s
Checksum OK (0xCB24)
Flashing completed in 3 min 9.828 s
 
Phone Type: RM-689 
SW Version: V 02.60 06-08-10 RM-689 (c) Nokia 
Imei plain: 35379404855227-8
Product Code: 059B380
Cellular System: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: IA
Language Pack:
- not available.

 
Imei net: 35379404855227
Version: 
Provider: GSM Test Operator, Country: -
Counter: 0/3, 0/10
 
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000030002
 
BLOCK 1:   1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 2:   1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 3:   1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 4:   1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 5:   1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 6:   1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 7:   1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN

Flashing completed BUT IT DOES NOT TURNING ON
I also flash it to version 02.510, Flashing completed again BUT STILL DOES NOT TURNING ON.

any idea MXkey Team?

[PedaLBoard]

anyone have an tested flash file
please upload it here

your help is highly appreciated..tia