c2-03 lcd prob

[habibkhalil]

get c2-03 lights on then off i flash it same prob but keyboard ok
here's phone test

Phone Type: RM-702
SW version: V 07.65 19-09-12 RM-702 (c) Nokia

ID Test name Startup Result
33 SIM_LOCK N passed
93 SECURITY N passed
90 PWR_KEY N passed
2 CURRENT_CONS N passed
43 LCD N !no signal
44 LPRF_AUDIO_LINES N passed
21 LPRF_IF N passed
7 KEYBOARD_STUCK N passed
22 CAMERA_IF N passed
71 BT_WAKEUP N passed
96 HOOKINT N passed
101 BTEMP N passed
118 RF_ANTENNA N !no signal
112 CDSP_PA_TX_POWER N passed
227 SLEEP_CLOCK_FREQ N passed
52 KEYB_LINE N passed
10 ADC_IF N passed
50 MEMORY_CARD_IF N passed
60 TOUCH_STUCK N passed
103 TOUCH_IF N !no signal
53 SIM_MULTIPLEXER_IF N passed
17 RF_PLL N passed
45 FEM_CURRENT N passed
47 SECURITY_FUSE N passed


what means lcd no signal

here's flash log

CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.37
EBL version: Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 00EC 3012 - 23280002 [Samsung ]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-03 USB Phonet, PORT_ID: 355219051111182
Verifying communication to device OK.


Phone type: RM-702 (C2-03)
SW version: V 07.65 19-09-12 RM-702 (c) Nokia
Imei plain: 35521905111118-2
Product code: 059D432
Battery voltage: 3774 mV, current: 28 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: M_A
Language Pack:
English,Dannish,Norwegian,Swedish

Camera config: 115B6002004020, ver:

Imei net: 35521905111118
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... Failed! (0000)
Completed in 1.662 s

[habibkhalil]

Originally Posted by satwindershine

Its hardware problem

[email protected]

thanks but which are faulty components to check

[.::ZUBER::.]

Bro.

Check LCD ways or change LCD will solve it.


BR,
ZUBER