Connection between ASK2RPL & SX4 Autho - GSM-Forum

realtech · 01-11-2010, 22:16

Dear All

Please explain is there any connection between ASK2RPL & SX4 Authorization
For eg if IMEI is damaged we create *.ask file and send to get back RPL file and we write back to the mobile am i right?

Also i heard that imei is written in UEM with once programmable and protected so that it cant be written back.so how its written back.and regarding BB5 RPL what is the approximate price in case if you use mx logger to receive RPL.

Is using USB cable for mobile flashing through the combination of HWk & Mx key will it be substitue for Fbus cable especially when you dont have 7 pin cable for the case of Nokia 3110c will it solve the issue?

Please advice

gbluez · 01-12-2010, 00:13

DCT4 rpl plan:
- Data inside UEM called data2, it is locked on uem's otp.
- Data inside flash chip called data1, it is erasable, rewriteable. You see mobileex has "reset data 1" feature for repair purpose.

BB5 rpl plan almost the same as above, otp stored @ rap chip (pub id) , and the secondary stored inside flashchip (npc).
You also see "reset npc" on mobileex.

About bb5 handling, on usb cable you cannot access such feature that should be run on f-bus cable, like reading npc for backup purpose.
And for the price on bb5 ask2rpl, we dont have this service at the moment

br

realtech · 01-12-2010, 09:40

OK Thanks for the info so where is the information stored in UEM or in Flash IC for Pm1 PM308 ,PM120? Pls advice.

Also didnt explain regarding SX4 connection with RPL?

That means MX logger doesnt have any role for time being?

realtech · 01-12-2010, 19:48

No reply??? why dont the manufacturer of each boxes or dongles make their website stronger with all the details regarding their products like manuals ,user guides,and how to work their software interfaces etc why all information only on forums and that too not always answered by the manufacturers and very complicated what is the principle behind this? Is all this a small organisation with 2-3 people working?

even the MX key website shows on picture www.mxkey.com but its mxkey.biz

And what is alll this BB5 rpl server always down what the people will do by just keeping their handset as a dummy phone?
And BB5 RPL its costlier than platinum or Gold is all this a monopoly market.
And the final output you put on your time and energy is nothing is just few bugs
All the information is limited and is not straight
Things have to be changed in a good manner

I'm only a observer since 1 year on this field just to help each other

Any GSM experts who ever read this Please Guide

alfacell · 01-12-2010, 20:54

Just refer to join bro .... I can not coment on this

gbluez · 01-12-2010, 21:23

hi,
SX4 and ask-rpl service is different thing. Anyone who has SX4 card can build their own sx4 server. This is nothing to do with nk company.
As you know, bb5 ask-rpl is not a calculation service. It is database fetching service, placed somewhere on nk server.
Who can profide this "tunnel", he'll be a rich man in no time

Don't be mad about bricked phone (damaged NPC), it is nk policy. Bring to their official repair agent and all be done.

whole PM / RPL / NPC are stored on flash chip.
Data2 / public id are stored on OTP. (DCT4 : UEM, BB5 : RAP)

Quote:

All the information is limited and is not straight

tips and tricks are given clear enough on sticky.

br

realtech · 01-12-2010, 21:51

First of all heartly Thanx to gbluez

What i understood is SX4 is an authentication given to the phone to write the protected areas values.so who supplies SX4 card ?

regarding the bb5 rpl the term used tunnel means a gateway for this service am i right?

01-11-2010, 22:16	#1 (permalink)
realtech Freak Poster Join Date: Apr 2009 Posts: 302 Member: 1003310 Status: Offline Thanks Meter: 28	Connection between ASK2RPL & SX4 Autho Dear All Please explain is there any connection between ASK2RPL & SX4 Authorization For eg if IMEI is damaged we create *.ask file and send to get back RPL file and we write back to the mobile am i right? Also i heard that imei is written in UEM with once programmable and protected so that it cant be written back.so how its written back.and regarding BB5 RPL what is the approximate price in case if you use mx logger to receive RPL. Is using USB cable for mobile flashing through the combination of HWk & Mx key will it be substitue for Fbus cable especially when you dont have 7 pin cable for the case of Nokia 3110c will it solve the issue? Please advice

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help! sir,mr.nadem gondal how can i fix this sx4 autho!	gsmTECHNICIAN	Cyclonebox	3	10-22-2009 09:42
What is difference between bypass sx4 & sx4?	Gsm Benghazi	Cyclonebox	6	08-26-2009 20:08
No connection between Astral & PC???	Mr.Who	Mitsubishi	3	03-18-2002 05:40

01-12-2010, 00:13	#2 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	DCT4 rpl plan: - Data inside UEM called data2, it is locked on uem's otp. - Data inside flash chip called data1, it is erasable, rewriteable. You see mobileex has "reset data 1" feature for repair purpose. BB5 rpl plan almost the same as above, otp stored @ rap chip (pub id) , and the secondary stored inside flashchip (npc). You also see "reset npc" on mobileex. About bb5 handling, on usb cable you cannot access such feature that should be run on f-bus cable, like reading npc for backup purpose. And for the price on bb5 ask2rpl, we dont have this service at the moment br

01-12-2010, 09:40	#3 (permalink)
realtech Freak Poster Join Date: Apr 2009 Posts: 302 Member: 1003310 Status: Offline Thanks Meter: 28	OK Thanks for the info so where is the information stored in UEM or in Flash IC for Pm1 PM308 ,PM120? Pls advice. Also didnt explain regarding SX4 connection with RPL? That means MX logger doesnt have any role for time being?

01-12-2010, 19:48	#4 (permalink)
realtech Freak Poster Join Date: Apr 2009 Posts: 302 Member: 1003310 Status: Offline Thanks Meter: 28	No reply??? why dont the manufacturer of each boxes or dongles make their website stronger with all the details regarding their products like manuals ,user guides,and how to work their software interfaces etc why all information only on forums and that too not always answered by the manufacturers and very complicated what is the principle behind this? Is all this a small organisation with 2-3 people working? even the MX key website shows on picture www.mxkey.com but its mxkey.biz And what is alll this BB5 rpl server always down what the people will do by just keeping their handset as a dummy phone? And BB5 RPL its costlier than platinum or Gold is all this a monopoly market. And the final output you put on your time and energy is nothing is just few bugs All the information is limited and is not straight Things have to be changed in a good manner I'm only a observer since 1 year on this field just to help each other Any GSM experts who ever read this Please Guide

01-12-2010, 20:54	#5 (permalink)
alfacell Junior Member Join Date: Oct 2007 Location: MX-KEY is the BEST NOKIA TOOL. Age: 48 Posts: 24 Member: 603999 Status: Offline Thanks Meter: 5	Just refer to join bro .... I can not coment on this

01-12-2010, 21:51	#7 (permalink)
realtech Freak Poster Join Date: Apr 2009 Posts: 302 Member: 1003310 Status: Offline Thanks Meter: 28	First of all heartly Thanx to gbluez What i understood is SX4 is an authentication given to the phone to write the protected areas values.so who supplies SX4 card ? regarding the bb5 rpl the term used tunnel means a gateway for this service am i right?