dobble sim nokia x1-01 user code unlock done with mx key here is logs Phone Type: RM-713 SW Version: V 05.27 26-05-11 RM-713 (c) Nokia Imei plain: 3578930413***** Product Code: 059G444 Cellular System: GSM ASIC ID: 0x2292, type: 11 Ppm Id: IJ Language Pack: - not available. "C:\Program Files\Nokia\Phoenix\Products\RM-713" folder created. Imei net: 35789304132374 Provider: GSM Test Operator Counter: 0/3, 0/10 CONFIG_DATA: 0010100000000000 PROFILE_BITS: 0000000000030002 BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN Completed in 0.843 s FULL FACTORY... OK USER DATA... OK LEAVE FACTORY... OK SERVICE CENTER... OK SOFTWARE UPGRADE... OK PRODUCTION TUNING... OK Reset User Code (to default:12345) ... OK Completed in 0.844 s |
Quote:
with usb cable or fbus cable ? |
fbus cable needed for remove code |
Quote:
|
i use gpg ufc v2 cable number 2 |
Give me the link to download the flash file of X1-01 |
|
Imei data is empty! MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 4] - C085 Using device: HTI BOX, FW ver: 00.17 Connection status: UHCI:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.0.0 Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011) Do not disconnect or abort this operation otherwise phone will be damaged. Device synchronized. CPU: XGOLD 110 Sending EBL Loader ...OK Sending EBL ...OK Getting EBL Version ... Boot mode: 0xCC EBL version major/minor: 10.24 EBL version : Default_RAM_Bootloader Set baud rate to: 921.60 Kbps Flash ID: 00EC 2404 [Samsung ] Processing file: rm713_005.290 Downloading item CODE:hw_b1_rm713_r05.290.fls, num block: 3, size: 5.58 MB Erasing area 0x00000000-0x00005FFE ...OK Programming completed in 0.765 s Erasing area 0x00800000-0x00BEFFFE ...OK Programming completed in 1 min 41.953 s Erasing area 0x00C5D000-0x00DFB6FE ...OK Programming ... flashing terminated ! |
thank for sharing keep it up |
cable no 7 ufc use in x1-01 tested me 100% wOrk ;) |
nOt use cable no 2 use Only cable no 7 ufc gpg |
u need new version mobileEx 3.5 (rev1.3) |
i used to waste 2 hours on cable 2 and 6 :) but thanks ill keep in mind onwards now Quote:
|
http://i1195.photobucket.com/albums/...1001pinout.jpg File Download Link Nokia X1-01 RM-713 5.29.exe - 4shared.com - online file sharing and storage - download CPU: XGOLD 110 Sending EBL Loader ...OK Sending EBL ...OK Getting EBL Version ... Boot mode: 0xCC EBL version major/minor: 10.24 EBL version : Default_RAM_Bootloader Set baud rate to: 921600 Flash ID: 00EC 2404 [Samsung ] Phone Type: RM-713 SW Version: V 05.27 26-05-11 RM-713 (c) Nokia Imei plain: 3578910480]]]]]]] Product Code: 059G444 Cellular System: GSM ASIC ID: 0x2292, type: 11 Ppm Id: IJ Language Pack: - not available. Imei net: 35789104801532 Provider: GSM Test Operator Counter: 0/3, 0/10 CONFIG_DATA: 0010100000000000 PROFILE_BITS: 0000000000030002 BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN |
All times are GMT +1. The time now is 02:08. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -