GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > MXKEY (by Alim Hape) > MXKEY Nokia Flasher and Unlocker (by Alim Hape)

Reply
 
LinkBack Thread Tools Display Modes
Old 06-07-2013, 10:50   #1 (permalink)
PSG
No Life Poster
 
PSG's Avatar
 
Join Date: May 2003
Location: POLAND
Posts: 1,256
Member: 27761
Status: Offline
Thanks Meter: 54
E51 FBUS flash problem with mxkey


i have E51 which should be reflash but mxkey stop flashing, lower is log.
because i had problems with 8800 which was erased during flash but not write back i made fbus flash now and before i store full RPL all block backup form that E51, but why E51 was not flashed?
is it problem with this E51, phone works ok before

Code:
Version from phone: 300.34.56
Version from file: 41034001
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: XXXXX
Using device: HTI, FW ver: 00.50, SN: XXXXX
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7601.17514
Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013)
Reading RPL backup ...
Reading Secure Storage ...
Reading Important data ...
Reading SIMLOCK data ...
Reading CERT data ...
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 10E00116896B0052DF4EEFA607C065B9E85D87DC
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 12.8.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: 0400 0000  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 00EC 0040  - 0000 0022 [Samsung 2Gb DDP OneNAND,2 Gbits] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.5
 Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5]  version: 12.8.0 revision: 2.0 size: 0x8B49D
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: 35AC54F8E31BE1357AB78D73834F020906331653
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
Reading CMT R&D (0x0 bytes).
Reading CMT MDM_KEYS (0x0 bytes).
Reading CMT PARTNERC (0x0 bytes).
Flash Imei: 359330024XXXXX
NPC_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
SIMLOCK_DATA saved OK
SIMLOCK_KEY_DATA saved OK
SUPERDONGLE_KEY_DATA saved OK
CMLA_KEY_DATA saved OK
RF_DATA saved OK
WARRANTY_DATA saved OK
PROD_DATA saved OK
BT_DATA saved OK
LOCK_DATA saved OK
LOCK120_DATA saved OK
BB_DATA saved OK
WLAN_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\BB5_359330024XXXXX_BACK.rpl" 
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 10E00116896B0052DF4EEFA607C065B9E85D87DC
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 12.8.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: 0400 0000  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 00EC 0040  - 0000 0022 [Samsung 2Gb DDP OneNAND,2 Gbits] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.5
 Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5]  version: 12.8.0 revision: 2.0 size: 0x8B49D
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: 35AC54F8E31BE1357AB78D73834F020906331653
Processing MCU file: rm244_41034001_prd.c00 
 [BB5,XSR 1.5]  size: 53.53 MB
 Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103
Storing certificate [NPC, CCC, HWC, R&D] ...ERROR: Packet Error(0xAA), code 0xA4000002
Error 
Erase size: 102.81 MB
CMT FLASH,MuxOneNAND area [00040000-007FFFFF]
CMT FLASH,MuxOneNAND area [00A00000-068FFFFF]
Error while erasing, Result: 00000000000000 , 0
  Reply With Quote
Old 06-07-2013, 12:42   #2 (permalink)
No Life Poster
 
.::ZUBER::.'s Avatar
 
Join Date: Apr 2006
Location: MXBOX THUNDER Helpdesk
Age: 50
Posts: 4,273
Member: 262425
Status: Offline
Sonork: 100.1617691
Thanks Meter: 1,264
Bro.

Check FBus Cable or change if needed,

Clean PCB & repeat job again,

Most of occasion this is the result,

Post reply if not solve.


BR,
ZUBER
  Reply With Quote
Old 06-09-2013, 17:35   #3 (permalink)
No Life Poster
 
gbluez's Avatar
 
Join Date: Jul 2004
Posts: 11,049
Member: 73565
Status: Offline
Thanks Meter: 5,062
Looks like you are using a JIG type fbus cable. That error is generate by not suitable pin usage, bad pins contact, else cable is bad.
  Reply With Quote
Old 06-09-2013, 21:20   #4 (permalink)
PSG
No Life Poster
 
PSG's Avatar
 
Join Date: May 2003
Location: POLAND
Posts: 1,256
Member: 27761
Status: Offline
Thanks Meter: 54
i'm using GPG UFC v2.0 Fbus Cables from w w w. gpgufc.c om
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 08:58.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.13424 seconds with 8 queries

SEO by vBSEO