E52 - repairSD - Configuration request failed (ANSWERED)

[aleshek]

Please for help with this issue, NOKIA E52 (and another, 6700c, 6303i...)
I can't repair SECURITY_TEST failed, because of SDrepair error, always i get ERROR: Configuration request failed !
I have new HTI PLUS with newest 0.50 FW, last release 3.5 rev1.7, synchronized files. I tried on two computer with same results.


f-bus scanning:

SW version: V ICPR82_11w16.3.5 19-08-11 RM-469 (c) Nokia
Imei plain: 35521603499637-4
Product code: 0591678
Battery voltage: 4692 mV, current: 14 mA
ApeCoreSw: 081.003
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 355216034996374
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

SDrepair:

MXKEY [MxKey Team HTI PLUS Flasher Interface 2], SN: C083xxx
Using device: HTI, FW ver: 00.50, SN: 010058AD
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0 , NTMP ver: 6.0.6002.18005
Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)

Phone type: RM-469 (Nokia E52-1)
SW version: V ICPR82_11w16.3.5 19-08-11 RM-469 (c) Nokia
ApeCoreSw: 081.003

CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPUYAMA ver: 1.1]
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 27E0000C0C650344C91E7020DD6EDA486B714790
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 11.34.0 revision: 3.0 size: 0x3B40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
ERROR: Configuration request failed !
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPUYAMA ver: 1.1]
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 27E0000C0C650344C91E7020DD6EDA486B714790
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 11.10.0 revision: 3.0 size: 0x3B40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW

Thank you for help, WBR, Ale

[gbluez]

looks like your box is damaged.

anyway, you can use USB to repair this.

BR