E63 no charger (ANSWERED) - GSM-Forum

turca · 03-09-2012, 22:39

Phone Type: RM-450
SW version: V ICPR71_09w47.3 09-02-10 RM-450 (c) Nokia

ID Test name Startup Result
88 TAHVOINT Y passed
46 UEM_CBUS_IF Y passed
3 EAR_DATA_LOOP Y passed
12 SIM_CLK_LOOP Y passed
13 SIM_IO_CTRL_LOOP Y passed
33 SIM_LOCK N passed
93 SECURITY N !failed !
90 PWR_KEY N passed
2 CURRENT_CONS N passed
20 BACKUP_BATT N passed
56 SLEEPCLK_FREQ N passed
96 HOOKINT N passed
101 BTEMP N passed
108 EXT_DEVICE N passed
86 CDSP_RF_BB_IF N passed
83 CDSP_RF_SUPPLY N passed
85 CDSP_TX_IQ N passed
74 CDSP_TXC_DATA N passed
82 CDSP_PWR_DETECTOR_BIAS N passed
79 CDSP_RX_PLL_PHASE_LOCK N passed
80 CDSP_TX_PLL_PHASE_LOCK N !not ready
75 CDSP_WCDMA_TX_POWER N !not ready
81 CDSP_RX_IQ_LOOP_BACK N !not ready
77 CDSP_GSM_TX_POWER N !not ready
7 KEYBOARD_STUCK N !not ready
21 LPRF_IF N !not ready
22 CAMERA_IF N !not ready
44 LPRF_AUDIO_LINES N !not ready
59 MAIN_LCD_IF N !not ready
71 BT_WAKEUP N !not ready
72 WLAN N !not ready
92 BT_WLAN_COEXISTENCE N !not ready
42 RADIO N !not ready

Is software or hardware?

.::ZUBER::. · 03-10-2012, 10:32

bro. your security test failed, so do it first & then post logs of buscheck & self test.

gbluez · 03-11-2012, 02:37

need logs from buscheck and scan of your phone to analyze it further.

turca · 03-12-2012, 14:13

MXKEY [MxKey Team HTI PLUS Flasher Interface 2], SN: C0XXXX78
Using device: HTI, FW ver: 00.50, SN: 01XXXX5A
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.13946(25-02-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 03700110B17E00520B7021FF098C3D7E2C3D1837
ASIC MODE ID: 00
ROOT KEY HASH: 9A28E119033B91D14D22838C86D0D53C
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 11.34.0 revision: 2.0 size: 0x3B80
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0400 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0040 - 0000 0121 [Samsung 2Gb DDP OneNAND,2 Gbits] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.5
Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 11.34.0 revision: 2.0 size: 0x8FE30
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Original Imei: 35683702XXXXX59
Original Product code: 0578484
Bluetooth ID: 002403027D71
WLAN ID: 002403A108B1
SIMLOCK PA identifier:
[0] PA_SL2
[1] PA_SL3

Phone type: RM-450 (Nokia E63)
SW version: V ICPR71_09w47.3 09-02-10 RM-450 (c) Nokia
ApeCoreSw: 410.21.010
Imei plain: 35683702XXXXX5-9
Product code: 0578484
Battery voltage: 4785 mV, current: 114 mA
Language Pack:
- not available.

SLPA ver[2]: PA_SL2 (15 digit NCK)

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

Imei net: 35683702XXXXX59
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

Phone Type: RM-450
SW version: V ICPR71_09w47.3 09-02-10 RM-450 (c) Nokia

ID Test name Startup Result
88 TAHVOINT Y passed
46 UEM_CBUS_IF Y passed
3 EAR_DATA_LOOP Y passed
12 SIM_CLK_LOOP Y passed
13 SIM_IO_CTRL_LOOP Y passed
33 SIM_LOCK N passed
93 SECURITY N passed
90 PWR_KEY N passed
2 CURRENT_CONS N passed
20 BACKUP_BATT N passed
56 SLEEPCLK_FREQ N passed
96 HOOKINT N passed
101 BTEMP N passed
108 EXT_DEVICE N passed
86 CDSP_RF_BB_IF N passed
83 CDSP_RF_SUPPLY N passed
85 CDSP_TX_IQ N passed
74 CDSP_TXC_DATA N passed
82 CDSP_PWR_DETECTOR_BIAS N passed
79 CDSP_RX_PLL_PHASE_LOCK N passed
80 CDSP_TX_PLL_PHASE_LOCK N !unknown(14 0) -
75 CDSP_WCDMA_TX_POWER N passed
81 CDSP_RX_IQ_LOOP_BACK N passed
77 CDSP_GSM_TX_POWER N !not ready
7 KEYBOARD_STUCK N !not ready
21 LPRF_IF N !not ready
22 CAMERA_IF N !not ready
44 LPRF_AUDIO_LINES N !not ready
59 MAIN_LCD_IF N !not ready
71 BT_WAKEUP N !not ready
72 WLAN N !not ready
92 BT_WLAN_COEXISTENCE N !not ready
42 RADIO N !not ready

gbluez · 03-13-2012, 01:09

all OK from software side.
check BTEMP resistor, check BETTY chip.

change all if needed. according to your measurement result.

03-09-2012, 22:39	#1 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,381 Member: 211017 Status: Offline Thanks Meter: 312	E63 no charger (ANSWERED) Phone Type: RM-450 SW version: V ICPR71_09w47.3 09-02-10 RM-450 (c) Nokia ID Test name Startup Result 88 TAHVOINT Y passed 46 UEM_CBUS_IF Y passed 3 EAR_DATA_LOOP Y passed 12 SIM_CLK_LOOP Y passed 13 SIM_IO_CTRL_LOOP Y passed 33 SIM_LOCK N passed 93 SECURITY N !failed ! 90 PWR_KEY N passed 2 CURRENT_CONS N passed 20 BACKUP_BATT N passed 56 SLEEPCLK_FREQ N passed 96 HOOKINT N passed 101 BTEMP N passed 108 EXT_DEVICE N passed 86 CDSP_RF_BB_IF N passed 83 CDSP_RF_SUPPLY N passed 85 CDSP_TX_IQ N passed 74 CDSP_TXC_DATA N passed 82 CDSP_PWR_DETECTOR_BIAS N passed 79 CDSP_RX_PLL_PHASE_LOCK N passed 80 CDSP_TX_PLL_PHASE_LOCK N !not ready 75 CDSP_WCDMA_TX_POWER N !not ready 81 CDSP_RX_IQ_LOOP_BACK N !not ready 77 CDSP_GSM_TX_POWER N !not ready 7 KEYBOARD_STUCK N !not ready 21 LPRF_IF N !not ready 22 CAMERA_IF N !not ready 44 LPRF_AUDIO_LINES N !not ready 59 MAIN_LCD_IF N !not ready 71 BT_WAKEUP N !not ready 72 WLAN N !not ready 92 BT_WLAN_COEXISTENCE N !not ready 42 RADIO N !not ready Is software or hardware?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5110v5.29 no network	GSMlearner	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	04-08-2001 17:15
Dejans Flasher Problem with 6150, NO Network after Flashing	AboAli	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	03-03-2001 22:39
My 6150 (5.23) No network after Flashing	AboAli	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	01-31-2001 15:56
6150 no outgoing calls	edis	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-20-2000 20:19
no one can unlock 6110 05.40 25-5-99	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	09-22-1999 08:03

03-10-2012, 10:32	#2 (permalink)
.::ZUBER::. No Life Poster Join Date: Apr 2006 Location: MXBOX THUNDER Helpdesk Age: 50 Posts: 4,273 Member: 262425 Status: Offline Sonork: 100.1617691 Thanks Meter: 1,264	bro. your security test failed, so do it first & then post logs of buscheck & self test.

03-11-2012, 02:37	#3 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	need logs from buscheck and scan of your phone to analyze it further.

03-12-2012, 14:13	#4 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,381 Member: 211017 Status: Offline Thanks Meter: 312	MXKEY [MxKey Team HTI PLUS Flasher Interface 2], SN: C0XXXX78 Using device: HTI, FW ver: 00.50, SN: 01XXXX5A Connection status: OHCI:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.1.0 Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.13946(25-02-2012) CMT Data : SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13] EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 03700110B17E00520B7021FF098C3D7E2C3D1837 ASIC MODE ID: 00 ROOT KEY HASH: 9A28E119033B91D14D22838C86D0D53C ROM ID: 4B9B75103E691FF8 SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 11.34.0 revision: 2.0 size: 0x3B80 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105 eBB5ProtocolType: NEW TransmissionMode: DDR&TX2 Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT Storage2: 0400 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT Storage4: 00EC 0040 - 0000 0121 [Samsung 2Gb DDP OneNAND,2 Gbits] type: FLASH,MuxOneNAND, asic:CMT Suggested algorithm: XSR 1.5 Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 11.34.0 revision: 2.0 size: 0x8FE30 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105 TransmissionMode: DDR&TX2 FUR: Adding Asic CMT as client OK CMT PAPUBKEYS HASH: D9C25399C696B8549EDCDB1497A950B3A20DDFB6 Original Imei: 35683702XXXXX59 Original Product code: 0578484 Bluetooth ID: 002403027D71 WLAN ID: 002403A108B1 SIMLOCK PA identifier: [0] PA_SL2 [1] PA_SL3 Phone type: RM-450 (Nokia E63) SW version: V ICPR71_09w47.3 09-02-10 RM-450 (c) Nokia ApeCoreSw: 410.21.010 Imei plain: 35683702XXXXX5-9 Product code: 0578484 Battery voltage: 4785 mV, current: 114 mA Language Pack: - not available. SLPA ver[2]: PA_SL2 (15 digit NCK) SIMLOCK seems to be valid SUPERDONGLE_KEY seems to be valid CMLA_KEY seems to be valid WMDRM_PD seems to be valid SIMLOCK_TEST passed SECURITY_TEST passed Imei net: 35683702XXXXX59 Version: SIMLOCK SERVER Counter: 0/3, 0/10 CONFIG_DATA: 2440700000000000 PROFILE_BITS: 0000000000000000 BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN Phone Type: RM-450 SW version: V ICPR71_09w47.3 09-02-10 RM-450 (c) Nokia ID Test name Startup Result 88 TAHVOINT Y passed 46 UEM_CBUS_IF Y passed 3 EAR_DATA_LOOP Y passed 12 SIM_CLK_LOOP Y passed 13 SIM_IO_CTRL_LOOP Y passed 33 SIM_LOCK N passed 93 SECURITY N passed 90 PWR_KEY N passed 2 CURRENT_CONS N passed 20 BACKUP_BATT N passed 56 SLEEPCLK_FREQ N passed 96 HOOKINT N passed 101 BTEMP N passed 108 EXT_DEVICE N passed 86 CDSP_RF_BB_IF N passed 83 CDSP_RF_SUPPLY N passed 85 CDSP_TX_IQ N passed 74 CDSP_TXC_DATA N passed 82 CDSP_PWR_DETECTOR_BIAS N passed 79 CDSP_RX_PLL_PHASE_LOCK N passed 80 CDSP_TX_PLL_PHASE_LOCK N !unknown(14 0) - 75 CDSP_WCDMA_TX_POWER N passed 81 CDSP_RX_IQ_LOOP_BACK N passed 77 CDSP_GSM_TX_POWER N !not ready 7 KEYBOARD_STUCK N !not ready 21 LPRF_IF N !not ready 22 CAMERA_IF N !not ready 44 LPRF_AUDIO_LINES N !not ready 59 MAIN_LCD_IF N !not ready 71 BT_WAKEUP N !not ready 72 WLAN N !not ready 92 BT_WLAN_COEXISTENCE N !not ready 42 RADIO N !not ready

03-13-2012, 01:09	#5 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	all OK from software side. check BTEMP resistor, check BETTY chip. change all if needed. according to your measurement result.