E71 reset phone lock doent works - GSM-Forum

chris2007 · 10-05-2012, 00:44

Version Info:
MCU SW version: V 100.71.821.4 06-06-08 RM-346 (c) Nokia
HW version: 0910
RFIC version: 17141715
DSP version: L07w15PB_08w20
APE SW Core version: 100.07.76
APE Variant version: 100.07.76100.07.76_v215_20.02
APE Test version: RM346ENO7411718214.029
Retu version: 15
Tahvo version: 22
APE HW version: 256
APE ADSP SW version: 256
WLAN ID: 00 AE 29 1A FC 22
Bluetooth ID: 00 22 FC 19 CB EE
Product Info:
Production serial number: SIK206207
Product code: 0568687
Basic production code: 0552256
Product specific data: 000000000000000000000000000000000000
Long production SN: 0
Serial Numbers:
IMEI plain: 354855024058702
IMEI spare to net: 3A 45 58 05 42 50 78
IMEI SV to net: 33 45 58 05 42 50 78 00 F1
NCK Codes: #pw+294943294949577+1#
Other Info:
Model: Nokia E71 (Smartphone)
CS type: GSM850/GSM900/GSM1800/GSM1900/WCDMA I/WCDMA VIII
Battery voltage: 4616 mV
Battery current: 72 mA
BSI: 4.8 KOhm

Imei net: 35xxxxxxxxxxxx
Version: SIMLOCK SERVER
Provider: Hutchison 3G Australia Pty. Ltd. , Country: Australia
Counter: 0/3, 0/10

CONFIG_DATA: 5050600042465540
PROFILE_BITS: 8000000000000000

BLOCK1: 1=OPEN
BLOCK2: 1=OPEN
BLOCK3: 1=OPEN
Counter already blocked.
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 2.717 s

i try 12345 it didn't works

alo-alo · 10-05-2012, 01:38

Power on the phone,wait for 5 minutes and try.

If it doesn`t work,read user code and try it same way.

br.

.::ZUBER::. · 10-05-2012, 08:29

Quote:

Originally Posted by alo-alo

Power on the phone,wait for 5 minutes and try.

If it doesn`t work,read user code and try it same way.

br.

Bro.
Yours is 1st Method,
Already 2nd Method not works,
So Encrypted Code can't be remove with your Method.

See this:

Quote:

FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 2.717 s

i try 12345 it didn't works

When Both Method not works for Encrypted Code,
The only option is to Tick Factory Reset after Flash & Flash it with Latest Firmware will solve it.

BR,
ZUBER

.::MASTER ALONE::. · 10-05-2012, 18:18

Quote:

Originally Posted by chris2007

Version Info:
MCU SW version: V 100.71.821.4 06-06-08 RM-346 (c) Nokia
HW version: 0910
RFIC version: 17141715
DSP version: L07w15PB_08w20
APE SW Core version: 100.07.76
APE Variant version: 100.07.76100.07.76_v215_20.02
APE Test version: RM346ENO7411718214.029
Retu version: 15
Tahvo version: 22
APE HW version: 256
APE ADSP SW version: 256
WLAN ID: 00 AE 29 1A FC 22
Bluetooth ID: 00 22 FC 19 CB EE
Product Info:
Production serial number: SIK206207
Product code: 0568687
Basic production code: 0552256
Product specific data: 000000000000000000000000000000000000
Long production SN: 0
Serial Numbers:
IMEI plain: 354855024058702
IMEI spare to net: 3A 45 58 05 42 50 78
IMEI SV to net: 33 45 58 05 42 50 78 00 F1
NCK Codes: #pw+294943294949577+1#
Other Info:
Model: Nokia E71 (Smartphone)
CS type: GSM850/GSM900/GSM1800/GSM1900/WCDMA I/WCDMA VIII
Battery voltage: 4616 mV
Battery current: 72 mA
BSI: 4.8 KOhm

Imei net: 35xxxxxxxxxxxx
Version: SIMLOCK SERVER
Provider: Hutchison 3G Australia Pty. Ltd. , Country: Australia
Counter: 0/3, 0/10

CONFIG_DATA: 5050600042465540
PROFILE_BITS: 8000000000000000

BLOCK1: 1=OPEN
BLOCK2: 1=OPEN
BLOCK3: 1=OPEN
Counter already blocked.
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 2.717 s

i try 12345 it didn't works

solved 100% try iT

BR.
Arsalan gsm2000

chris2007 · 10-05-2012, 23:52

Quote:

Originally Posted by gsm-2000

solved 100% try iT

BR.
Arsalan gsm2000

i was try this with no luck

Code:

FULL FACTORY... OK
Completed in 2.078 s
FULL FACTORY... OK
Completed in 0.969 s
FULL FACTORY... OK
Completed in 1.094 s
FULL FACTORY... OK
Completed in 1.203 s
FULL FACTORY... OK
Completed in 1.156 s

chris2007 · 10-10-2012, 21:09

downlaod file mcu,ppm,cnt,mmc,cnt and check all then flash here the result

Code:

Version from phone: 100.07.76
Version from file: 300.21.012
MXKEY [MxKey Team HTI PLUS Flasher Interface 4], SN: xxxxxxxx
Using device: HTI, FW ver: 00.50, SN: xxxxxxxx
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14195(13-07-2012)
Reading RPL backup ...
Reading Phone IDs ...
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1120020D49A50158DC69C8C874CD627E27799A0F
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
ERROR: Packet Error(0xAA), code 0xC0000002
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 11.34.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: 0400 0000  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 00EC 0040  - 0000 0121 [Samsung 2Gb DDP OneNAND,2 Gbits] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.5
 Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5]  version: 11.34.0 revision: 2.0 size: 0x8FE30
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1120020D49A50158DC69C8C874CD627E27799A0F
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
ERROR: Packet Error(0xAA), code 0xC0000002
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 11.10.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
Restarting phone ...
Reading Secure Storage ...
Reading Important data ...
Reading SIMLOCK data ...
Reading CERT data ...
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1120020D49A50158DC69C8C874CD627E27799A0F
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 11.34.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
ERROR: Configuration request failed !
Read Certificate failed.
NPC_DATA is empty.
SIMLOCK_DATA saved OK
SIMLOCK_KEY_DATA saved OK
WMDRM_PD_DATA saved OK
RF_DATA saved OK
WARRANTY_DATA saved OK
PROD_DATA saved OK
BT_DATA saved OK
LOCK_DATA saved OK
LOCK120_DATA saved OK
BB_DATA saved OK
WLAN_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\BB5_35xxxxxxxxxxxxx_BACK.rpl" 
Unknown ID !
Error getting boot info !
ERROR: bootstrap failed!
Task failed at (0800000A)!!!
 Last RX buffer: 88 13 00 00 E8 03 00 00 E8 03 00 00

.::MASTER ALONE::. · 10-11-2012, 14:03

Quote:

Originally Posted by chris2007

downlaod file mcu,ppm,cnt,mmc,cnt and check all then flash here the result

Code:

Version from phone: 100.07.76
Version from file: 300.21.012
MXKEY [MxKey Team HTI PLUS Flasher Interface 4], SN: xxxxxxxx
Using device: HTI, FW ver: 00.50, SN: xxxxxxxx
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14195(13-07-2012)
Reading RPL backup ...
Reading Phone IDs ...
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1120020D49A50158DC69C8C874CD627E27799A0F
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
ERROR: Packet Error(0xAA), code 0xC0000002
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 11.34.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: 0400 0000  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 00EC 0040  - 0000 0121 [Samsung 2Gb DDP OneNAND,2 Gbits] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.5
 Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5]  version: 11.34.0 revision: 2.0 size: 0x8FE30
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1120020D49A50158DC69C8C874CD627E27799A0F
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
ERROR: Packet Error(0xAA), code 0xC0000002
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 11.10.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
Restarting phone ...
Reading Secure Storage ...
Reading Important data ...
Reading SIMLOCK data ...
Reading CERT data ...
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1120020D49A50158DC69C8C874CD627E27799A0F
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 11.34.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
ERROR: Configuration request failed !
Read Certificate failed.
NPC_DATA is empty.
SIMLOCK_DATA saved OK
SIMLOCK_KEY_DATA saved OK
WMDRM_PD_DATA saved OK
RF_DATA saved OK
WARRANTY_DATA saved OK
PROD_DATA saved OK
BT_DATA saved OK
LOCK_DATA saved OK
LOCK120_DATA saved OK
BB_DATA saved OK
WLAN_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\BB5_35xxxxxxxxxxxxx_BACK.rpl" 
Unknown ID !
Error getting boot info !
ERROR: bootstrap failed!
Task failed at (0800000A)!!!
 Last RX buffer: 88 13 00 00 E8 03 00 00 E8 03 00 00

Try to usb flash before full backup must.

BR.
Arsalan gsm2000.

10-05-2012, 00:44	#1 (permalink)
chris2007 No Life Poster Join Date: Feb 2007 Posts: 3,197 Member: 453916 Status: Offline Sonork: 100.1620840 Thanks Meter: 246	E71 reset phone lock doent works Version Info: MCU SW version: V 100.71.821.4 06-06-08 RM-346 (c) Nokia HW version: 0910 RFIC version: 17141715 DSP version: L07w15PB_08w20 APE SW Core version: 100.07.76 APE Variant version: 100.07.76100.07.76_v215_20.02 APE Test version: RM346ENO7411718214.029 Retu version: 15 Tahvo version: 22 APE HW version: 256 APE ADSP SW version: 256 WLAN ID: 00 AE 29 1A FC 22 Bluetooth ID: 00 22 FC 19 CB EE Product Info: Production serial number: SIK206207 Product code: 0568687 Basic production code: 0552256 Product specific data: 000000000000000000000000000000000000 Long production SN: 0 Serial Numbers: IMEI plain: 354855024058702 IMEI spare to net: 3A 45 58 05 42 50 78 IMEI SV to net: 33 45 58 05 42 50 78 00 F1 NCK Codes: #pw+294943294949577+1# Other Info: Model: Nokia E71 (Smartphone) CS type: GSM850/GSM900/GSM1800/GSM1900/WCDMA I/WCDMA VIII Battery voltage: 4616 mV Battery current: 72 mA BSI: 4.8 KOhm Imei net: 35xxxxxxxxxxxx Version: SIMLOCK SERVER Provider: Hutchison 3G Australia Pty. Ltd. , Country: Australia Counter: 0/3, 0/10 CONFIG_DATA: 5050600042465540 PROFILE_BITS: 8000000000000000 BLOCK1: 1=OPEN BLOCK2: 1=OPEN BLOCK3: 1=OPEN Counter already blocked. FULL FACTORY... OK USER DATA... OK LEAVE FACTORY... OK SERVICE CENTER... OK SOFTWARE UPGRADE... OK PRODUCTION TUNING... OK Reset User Code (to default:12345) ... OK Completed in 2.717 s i try 12345 it didn't works

10-05-2012, 01:38	#2 (permalink)
alo-alo Registered User Join Date: Dec 2005 Location: Montenegro, Kotor Posts: 121 Member: 211475 Status: Offline Thanks Meter: 11	Power on the phone,wait for 5 minutes and try. If it doesn`t work,read user code and try it same way. br.