Help...Nokia N82 Blue Screen Hang After flash. (ANSWERED)

[mmrozibul]

When phone comes to me the phone was in restarting problem, I flashed the phone with 31 and 35 version file,but phone still remain same.Then a do the following step..

1. Backup rpl
2.Fulll erase
3.Full flash
4.write only npc from backup
5.write hwc,ccc /Without npc rpl(from ATF FOLDER)
6.Write full pm
7.sd repair
8.Simlock repair
9.SX4

then the phone info is

MCU Version: V 06wk41v64.24 05-11-09 RM-313 (c) Nokia
IMEI Plain : 358082018450466
IMEI Spare : A358082018450460
IMEI SV : 33580820184504609F
Phone Model: Nokia N82
Product Serial Number: CRD221763
Product Code : 0554982
Basic Production Code: 0549319
Default SN Type : 0
PPM Version : V 06wk41v64.24 05-11-09 RM-313 (c) Nokia
HW Version : 4002
RFIC Version : 17141715
DSP Version : sharaku.ICPR62_09w10p1
AHNE Version : 11
Retu Version : 15
Tahvo Version : 22

******** Reading SimLock ********
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status : Not Locked

SIMLOCK_TYPE : PA_SL2
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SECURITY_CODE : 12345
PHONE_MODE : TEST MODE

But phone stucks/hangs on blue screen(lights only on screen,no text).
I again flashed the phone with higher version and lower version firmware(31 and 35) But no luck.
What to do now?(Before flash display was ok)

[gbluez]

you will need to flash ENO for this phone.

BR

[mmrozibul]

Thanks for help

I flashed the phone with following procedure
1.
MCU File: rm313_ENO_x_2008wk06updv0.030.fpsx
PPM File: Empty
Content: Empty
2.
MCU File: RM-313_35.0.002_PR.C0R
PPM File: RM-313_35.0.002_PR.vXX
Content: RM313_31.0.016_019_uda_1.fpsx
3.
MCU File: normalize_susd_eno_sharaku_urel.fpsx
PPM File: Empty
Content: Empty

info is

Phone Type: RM-313 (Nokia N82)
SW Version: V 06wk41v64.24 05-11-09 RM-313 (c) Nokia
Imei plain: 35808201845046-6
Product Code: 0554982
Language Pack:
- not available.


Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
Total time to process is 24.359 s


Now phone hangs on nokia logo, what to do?

[Naeem123e]

Bro use letest flash file eno try again thenkssssss