How to flash infineon gold base models ?

[aminnovelty]

Dear supporter i have some qty of 1616 phone which is of infenion . I use GPG cable for this purposes .Whenever i try to flash by putting check on INFENION GOLD , it always says DONT TAKE DEVICE OTHERWISE IT WILL KILL YOUR SET and afterwards it becomes stop. Anybody can guide me how to resolve this problem ? Or how to flash these kind of phones ?

[naeem_skg786]

Originally Posted by aminnovelty

Dear supporter i have some qty of 1616 phone which is of infenion . I use GPG cable for this purposes .Whenever i try to flash by putting check on INFENION GOLD , it always says DONT TAKE DEVICE OTHERWISE IT WILL KILL YOUR SET and afterwards it becomes stop. Anybody can guide me how to resolve this problem ? Or how to flash these kind of phones ?

Below is the log for 1616 RH-125 using UFS interface.

Steps for Xgold phones flashing:
1. Tick Xgold
3. Select files as for normal flashing
4. Press power on for phone boot up

More info with pics will add in the similar post later on.




Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8929(24-06-2010), 1.0.0.14574(24-06-2010)
Do not disconnect or abort this operation otherwise phone will be damaged.
Device synchronized.
CPU ID: A200341100 [X-GOLD 110]
Sending Primary Boot Loader ...OK
Sending Secondary Boot Loader ...OK
Boot mode: CC
EBL version: 10.19, Default_RAM_Bootloader
Flash ID: 0020 88C0 [ST M58MWR064FU,64 Mbits]
Processing CODE:hw_f11_rh125_r03.610.fls from file rh125_003.610
Erasing area 0x00800000-0x00A0FFFE ...OK
Programming ...
Programming completed in 8.980 s
Erasing area 0x00C60000-0x00EAFFFE ...OK
Programming ...
Programming completed in 9.724 s
Erasing area 0x00FFC000-0x00FFFFFE ...OK
Programming ...
Programming completed in 0.010 s
Checksum ignored.
Processing CUST:hw_f11_rh125_003.61ae.fls from file rh125_003.61ae
Erasing area 0x00210000-0x0045FFFE ...OK
Programming ...
Programming completed in 10.919 s
Checksum ignored.
Processing CUST:hw_f11_rh1250_nai03.61ae.fls from file rh1250_nai03.61ae
Erasing area 0x00EB0000-0x00F7FFFE ...OK
Programming ...
Programming completed in 1.775 s
Checksum ignored.
Flashing completed in 44.935 s
Phone Emulation passed, image file succesfully verified.

Phone Type: RH-125
SW Version: V 03.61 29-01-10 RH-125 (c) Nokia
Imei plain: 3519770xxxxxxxx
Product Code: 0587507
Cellular System: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: AA
Language Pack:
- not available.


Imei net: 3519770xxxxxxxx
Version:
Provider: ALL Operator, Country: -
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000030002

BLOCK 1: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 2: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 3: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 4: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 5: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 6: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 7: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
Total time to process is 53.201 s

Real log without emulation will post soon.
Flashing higher version then 3.61.

[aminnovelty]

Thanks br i got the point , it was just check on EMULATION and what i was not putting that .-------------Thanks alot again for your kind screen shoot. love u.