Imei : ???????????????? FOR 1100 - GSM-Forum

fateh76dz · 11-06-2010, 12:13

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8980(18-10-2010), 1.0.0.14844(18-10-2010)
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0020 8823 [ST 58WR016FU,8 Mbits] page size: 64 K type: NOR area: 01000000-010FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C20
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 009A42F6:2984DA60
ASIC type: 2
UEM Imei: Empty
Flash Imei: 35667100552219
MasterCode: 5636436743
RPL saved to "C:\mobileEx\3.4\data\backup\_BACK.rpl"

Phone Type: RH-18
SW Version: V 7.36 21-11-05 RH-18 (c) NMP 1100
Imei plain: -
Product Code: ???????
Cellular System: GSM
ASIC ID: 0xD159, type: 2
Ppm Id: AE
Language Pack:
English,French,German,Italian

Imei net: FFFFFFFFFFFFFF
Version:
Counter: 0/3, 0/10

CONFIG_DATA: 89831BE12D44E8BC
PROFILE_BITS: 9DC4C530A126DEBD

BLOCK 2: 1.CORRUPTED (00)
SIMLOCK_DATA corrupted!

yolem053 · 11-06-2010, 13:11

try to use online logger-dct4, if the result is same then replace the UEM.

Haider Ali · 11-07-2010, 11:01

Not Possible..........

pankajkukar2 · 11-07-2010, 11:09

cpu se problem hai no result from software

sultan_ · 11-07-2010, 11:21

it is only done by uem chang.

SHIBLU · 11-07-2010, 11:24

Quote:

Originally Posted by fateh76dz

UEM Imei: Empty
Flash Imei: 35667100552219

problem is uem.
so not posible without changing uem.

sanjubhai · 11-07-2010, 14:46

Quote:

Originally Posted by fateh76dz

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8980(18-10-2010), 1.0.0.14844(18-10-2010)
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0020 8823 [ST 58WR016FU,8 Mbits] page size: 64 K type: NOR area: 01000000-010FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C20
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 009A42F6:2984DA60
ASIC type: 2
UEM Imei: Empty
Flash Imei: 35667100552219
MasterCode: 5636436743
RPL saved to "C:\mobileEx\3.4\data\backup\_BACK.rpl"

Phone Type: RH-18
SW Version: V 7.36 21-11-05 RH-18 (c) NMP 1100
Imei plain: -
Product Code: ???????
Cellular System: GSM
ASIC ID: 0xD159, type: 2
Ppm Id: AE
Language Pack:
English,French,German,Italian

Imei net: FFFFFFFFFFFFFF
Version:
Counter: 0/3, 0/10

CONFIG_DATA: 89831BE12D44E8BC
PROFILE_BITS: 9DC4C530A126DEBD

BLOCK 2: 1.CORRUPTED (00)
SIMLOCK_DATA corrupted!

in the case of 1100 and 2300 mostly the faulty one is the uem
so better to replace it with the new one and then write the original imei in uem and flash by calculating it manually with the help of online logger.....

wbr: sanjubhai.

rakesh15 · 11-07-2010, 15:06

Quote:

Originally Posted by fateh76dz

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8980(18-10-2010), 1.0.0.14844(18-10-2010)
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0020 8823 [ST 58WR016FU,8 Mbits] page size: 64 K type: NOR area: 01000000-010FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C20
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 009A42F6:2984DA60
ASIC type: 2
UEM Imei: Empty
Flash Imei: 35667100552219
MasterCode: 5636436743
RPL saved to "C:\mobileEx\3.4\data\backup\_BACK.rpl"

Phone Type: RH-18
SW Version: V 7.36 21-11-05 RH-18 (c) NMP 1100
Imei plain: -
Product Code: ???????
Cellular System: GSM
ASIC ID: 0xD159, type: 2
Ppm Id: AE
Language Pack:
English,French,German,Italian

Imei net: FFFFFFFFFFFFFF
Version:
Counter: 0/3, 0/10

CONFIG_DATA: 89831BE12D44E8BC
PROFILE_BITS: 9DC4C530A126DEBD

BLOCK 2: 1.CORRUPTED (00)
SIMLOCK_DATA corrupted!

bro
its time to change the phone
throw it away
dont forget to take out the display

11-06-2010, 12:13	#1 (permalink)
fateh76dz No Life Poster Join Date: Feb 2004 Location: -Algeria- Age: 36 Posts: 665 Member: 51746 Status: Offline Thanks: 239 Thanked 36 Times in 29 Posts	Imei : ???????????????? FOR 1100 Using device: UFS_USB V2.8 (c) SarasSoft 2007. Library version: 1.0.0.8980(18-10-2010), 1.0.0.14844(18-10-2010) ASIC ID: 0x2201 [UPP_2M ver: 2] SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164 FlashID0: 0020 8823 [ST 58WR016FU,8 Mbits] page size: 64 K type: NOR area: 01000000-010FFFFF FlashID1: 0000 0001 [unused/removed] ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514 Algorithm: u_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C20 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164 Performing Flash Authentication ...OK UEM ID: 009A42F6:2984DA60 ASIC type: 2 UEM Imei: Empty Flash Imei: 35667100552219 MasterCode: 5636436743 RPL saved to "C:\mobileEx\3.4\data\backup\_BACK.rpl" Phone Type: RH-18 SW Version: V 7.36 21-11-05 RH-18 (c) NMP 1100 Imei plain: - Product Code: ??????? Cellular System: GSM ASIC ID: 0xD159, type: 2 Ppm Id: AE Language Pack: English,French,German,Italian Imei net: FFFFFFFFFFFFFF Version: Counter: 0/3, 0/10 CONFIG_DATA: 89831BE12D44E8BC PROFILE_BITS: 9DC4C530A126DEBD BLOCK 2: 1.CORRUPTED (00) SIMLOCK_DATA corrupted!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	26	09-25-2012 02:41
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	07-18-2012 07:57
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	11-17-2011 17:08
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware-Repair Area	1	12-27-2006 10:20
Operator-Logo for 5110	MiMiR the WiseMan	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	06-25-1999 15:50

11-06-2010, 13:11	#2 (permalink)
yolem053 Freak Poster Join Date: Jan 2006 Location: Maniki Kapalong Norht Davao Posts: 269 Member: 227348 Status: Offline Sonork: yolem053 Thanks: 6 Thanked 33 Times in 29 Posts	try to use online logger-dct4, if the result is same then replace the UEM.

11-07-2010, 11:01	#3 (permalink)
Haider Ali Freak Poster Join Date: Apr 2008 Location: Pakistan Age: 27 Posts: 383 Member: 756333 Status: Offline Thanks: 85 Thanked 152 Times in 118 Posts	Not Possible..........

11-07-2010, 11:09	#4 (permalink)
pankajkukar2 No Life Poster Join Date: Oct 2007 Posts: 797 Member: 609329 Status: Offline Sonork: 100.160.2296 Thanks: 305 Thanked 126 Times in 90 Posts	cpu se problem hai no result from software

11-07-2010, 11:21	#5 (permalink)
sultan_ Freak Poster Join Date: May 2008 Posts: 448 Member: 770299 Status: Offline Sonork: 100.1603105 Thanks: 41 Thanked 164 Times in 121 Posts	it is only done by uem chang.