6600s-1b Buscheck Error - GSM-Forum

Jabbacks · 10-09-2012, 08:34

Using fbus cable I got the following:

PHP Code:

  [COLOR="White"][B]MXKEY [MxKey Team HTI PLUS Flasher Interface 4], SN: C0850AA5
Using device: HTI, FW ver: 00.50, SN: 010034B1
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012)
ERROR: Packet Error(0xAA), code 0xC0000002
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
 Bad contact, TX line remains low !
VCC_PH  BSI  TX  RX  RX2  CLK
     1    0   0   1    1    0
ERROR: bootstrap failed!

[/B][/COLOR]All 7 contact pins on board are visible. What's wrong here?

.::MASTER ALONE::. · 10-09-2012, 18:26

Quote:

Originally Posted by Jabbacks

Using fbus cable I got the following:

PHP Code:

  [COLOR="White"][B]MXKEY [MxKey Team HTI PLUS Flasher Interface 4], SN: C0850AA5
Using device: HTI, FW ver: 00.50, SN: 010034B1
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012)
ERROR: Packet Error(0xAA), code 0xC0000002
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
 Bad contact, TX line remains low !
VCC_PH  BSI  TX  RX  RX2  CLK
     1    0   0   1    1    0
ERROR: bootstrap failed![/B][/COLOR]

All 7 contact pins on board are visible. What's wrong here?

select right tab BB5 and what's the condition of phone.

BR.
Arsalan gsm2000.

Jabbacks · 10-10-2012, 02:57

It goes on and a few seconds later, it powers off. Sometimes, only Nokia screen during power up then shuts down...

.::ZUBER::. · 10-10-2012, 09:45

Quote:

Originally Posted by Jabbacks

It goes on and a few seconds later, it powers off. Sometimes, only Nokia screen during power up then shuts down...

It's Hardware,

Check or Change Betty IC, must solve it.

BR,
ZUBER

Jabbacks · 10-10-2012, 22:35

Hehehe, like I know all this hardware problems... I do this for fun! Ok Zuber, I'll try and see what you mean.

.::ZUBER::. · 10-11-2012, 10:11

Ha Ha!
You mean,
We both Posting here this Thread for Fun?

For me, not hope so.

BR,
ZUBER

Jabbacks · 10-17-2012, 02:07

Really, I buy all these unlocking boxes use them as hobby.... I kinda like it though! But, I'll try and see if I can find a service manual to do what you are suggeesting....

Thankz ::::::::ZUBER::::::::

10-09-2012, 08:34	#1 (permalink)
Jabbacks No Life Poster Join Date: Feb 2010 Location: Majuro, Marshall Islands Posts: 584 Member: 1227040 Status: Offline Sonork: 100:1654728 Thanks Meter: 55	6600s-1b Buscheck Error Using fbus cable I got the following: PHP Code: [COLOR="White"][B]MXKEY [MxKey Team HTI PLUS Flasher Interface 4], SN: C0850AA5 Using device: HTI, FW ver: 00.50, SN: 010034B1 Connection status: OHCI:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.1.0 Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012) ERROR: Packet Error(0xAA), code 0xC0000002 ERROR: Packet Error(0xAA), code 0xC0000002 Error details: Bad contact, TX line remains low ! VCC_PH BSI TX RX RX2 CLK 1 0 0 1 1 0 ERROR: bootstrap failed! [/B][/COLOR]All 7 contact pins on board are visible. What's wrong here? Last edited by Jabbacks; 10-09-2012 at 08:39.

10-10-2012, 02:57	#3 (permalink)
Jabbacks No Life Poster Join Date: Feb 2010 Location: Majuro, Marshall Islands Posts: 584 Member: 1227040 Status: Offline Sonork: 100:1654728 Thanks Meter: 55	It goes on and a few seconds later, it powers off. Sometimes, only Nokia screen during power up then shuts down...

10-10-2012, 22:35	#5 (permalink)
Jabbacks No Life Poster Join Date: Feb 2010 Location: Majuro, Marshall Islands Posts: 584 Member: 1227040 Status: Offline Sonork: 100:1654728 Thanks Meter: 55	Hehehe, like I know all this hardware problems... I do this for fun! Ok Zuber, I'll try and see what you mean.

10-11-2012, 10:11	#6 (permalink)
.::ZUBER::. No Life Poster Join Date: Apr 2006 Location: MXBOX THUNDER Helpdesk Age: 50 Posts: 4,273 Member: 262425 Status: Offline Sonork: 100.1617691 Thanks Meter: 1,264	Ha Ha! You mean, We both Posting here this Thread for Fun? For me, not hope so. BR, ZUBER

10-17-2012, 02:07	#7 (permalink)
Jabbacks No Life Poster Join Date: Feb 2010 Location: Majuro, Marshall Islands Posts: 584 Member: 1227040 Status: Offline Sonork: 100:1654728 Thanks Meter: 55	Really, I buy all these unlocking boxes use them as hobby.... I kinda like it though! But, I'll try and see if I can find a service manual to do what you are suggeesting.... Thankz ::::::::ZUBER::::::::