mx box problem (ANSWERED) dct 4 always give invalid imei checksum what is the problem |
hi, yes. it's not an error, it's not YET implemented, not yet burned into hti firmware: - ALL DCT4 UEM task - WD2 / TIKU flashing and UEM task. please use ufs as interface when doing such job. BR |
to buy mxbox if we use ufs say O_O Serial MXKEY [HTI mxkey FLASHER INTERFACE 0] - C08541DC Using device: HTI BOX, see FW: 00.08 Driver: FTDIBUS, see: 2.4.16.0, NTMP see: 2.6.2.0 Module see: 1.0.0.17309 (31/05/2011), Library see: 1.0.0.10695 (05/31/2011) Boot error: CC CC CC 00 - Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar. - Check cable That All Are Used Without Any solid and visible damage "Have good contact. If possible, try with Other cables. - On rare occasions phone Might Be Damaged or dead. So, if possible, try with Another phone. happens where the problem is 4 days without box |
All times are GMT +1. The time now is 00:51. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -