Mx key hti ...team help me....... - GSM-Forum

chandrumobiles · 06-26-2013, 15:33

XKEY [MxKey Team HTI PLUS Flasher Interface 0], SN: C087AE78
Using device: HTI, FW ver: 00.50, SN: 0100D2A5
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385
Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013)
Device synchronized.
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCCPhone Type:
SW version:

ID Test name Startup Result
42 RADIO Y passed
39 WARRANTY Y passed
33 SIM_LOCK Y passed
10 PPM_VALIDITY Y passed
43 LCD Y passed
80 KEY Y passed
81 PA Y passed
82 ADC1 Y passed
83 RTC_32KHZ Y passed
84 GPIO_LIGHT Y passed
85 HOOK_KEY Y passed
86 ACCESSORY Y passed
87 SIM_IF Y !no signal
88 SIM_INSERTED Y !no signal
90 FLASHCHK Y passed
94 SD_POWER Y passed
92 SIM2_IF Y !no signal
93 SIM2_INSERTED Y !no signal
91 SECURITY Y passed
EBL version major/minor: 10.24
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 0020 8804 - 23280001 [ST 58LR128U,128 Mbits]
CFI information:
Flash settings: 0/64, size: 0x01000000
2 Block regions:
127 x 0x00020000 = 0x00FE0000
4 x 0x00008000 = 0x00020000
EBL ready !

Phone type: RM-769
SW version: V 07.20 30-03-12 RM-769 (c) Nokia
Imei plain: ????????000000-0
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: MI
Language Pack:
- not available.

Imei plain is invalid !!!
SIMLOCK_DATA corrupted! WHAT CAN I DO//////???????????????

wolfgang1502 · 06-26-2013, 17:09

Restore rpl Backup

You have not, must Paid Rpl File Service, or send to Nokia Service

06-26-2013, 15:33	#1 (permalink)
chandrumobiles Freak Poster Join Date: Jan 2013 Location: palani. tamilnadu Posts: 200 Member: 1862407 Status: Offline Sonork: india Thanks Meter: 37	Mx key hti ...team help me....... XKEY [MxKey Team HTI PLUS Flasher Interface 0], SN: C087AE78 Using device: HTI, FW ver: 00.50, SN: 0100D2A5 Connection status: UHCI:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385 Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013) Device synchronized. CPU: XGOLD 110 Using embedded SBL from MCU. Sending EBL Loader ...OK Sending EBL ...OK Getting EBL Version ... Boot mode: 0xCCPhone Type: SW version: ID Test name Startup Result 42 RADIO Y passed 39 WARRANTY Y passed 33 SIM_LOCK Y passed 10 PPM_VALIDITY Y passed 43 LCD Y passed 80 KEY Y passed 81 PA Y passed 82 ADC1 Y passed 83 RTC_32KHZ Y passed 84 GPIO_LIGHT Y passed 85 HOOK_KEY Y passed 86 ACCESSORY Y passed 87 SIM_IF Y !no signal 88 SIM_INSERTED Y !no signal 90 FLASHCHK Y passed 94 SD_POWER Y passed 92 SIM2_IF Y !no signal 93 SIM2_INSERTED Y !no signal 91 SECURITY Y passed EBL version major/minor: 10.24 EBL version: Default_RAM_Bootloader Set baud rate to: 921.60 Kbit/s Flash ID: 0020 8804 - 23280001 [ST 58LR128U,128 Mbits] CFI information: Flash settings: 0/64, size: 0x01000000 2 Block regions: 127 x 0x00020000 = 0x00FE0000 4 x 0x00008000 = 0x00020000 EBL ready ! Phone type: RM-769 SW version: V 07.20 30-03-12 RM-769 (c) Nokia Imei plain: ????????000000-0 Cellular system: GSM ASIC ID: 0x2292, type: 11 Ppm Id: MI Language Pack: - not available. Imei plain is invalid !!! SIMLOCK_DATA corrupted! WHAT CAN I DO//////???????????????

06-26-2013, 17:09	#2 (permalink)
wolfgang1502 No Life Poster Join Date: Jul 2007 Posts: 2,546 Member: 541042 Status: Offline Thanks Meter: 519	Restore rpl Backup You have not, must Paid Rpl File Service, or send to Nokia Service