MXBox need help (ANSWERED) - GSM-Forum

com12gsm · 06-19-2011, 12:02

Nokia 9500 RA-2 Does it support by flashing?????

MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 4] - xxxxxxx
Using device: HTI BOX, FW ver: 00.17
Driver: USBUHCI:WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.17626(14-06-2011), Library ver: 1.0.0.11296(14-06-2011)
FLASHBUS not supported.

shybet · 06-19-2011, 16:20

For Comunicator type (9300, 9300i, 9500), you have to flash it with 2 cable, FBus cable and USB data cable (DKU-2) for flashing the ADSP and APE file.

here is sample for the file setlist:
MCU = RA2_6270.6440
PPM = -
CNT = -
ADSP = RA2n6270.c01
APE v = RA2n6270.l20
APE u = RA2n6270.u20

Connect the Fbus cable cable to your box, and the DKU-2 cable to USB port of your computer. Click flash. And then just wait 'till the flash process finished.

good luck

com12gsm · 06-20-2011, 01:21

this is what i did

Quote:

For Comunicator type (9300, 9300i, 9500), you have to flash it with 2 cable, FBus cable and USB data cable (DKU-2) for flashing the ADSP and APE file.

it seems mxbox didn't support DCTL

shybet · 06-20-2011, 03:13

Quote:

Originally Posted by com12gsm

this is what i did

it seems mxbox didn't support DCTL

Haven't try with mxbox. Try use UFS as interface, and make sure you select DCT4 in generation tab, because 9500 (RA-2) is a DCT-4 phone.

Good luck.

com12gsm · 06-20-2011, 07:09

Quote:

Try use UFS as interface, and make sure you select DCT4 in generation tab, because 9500 (RA-2) is a DCT-4 phone.

Bus check and scan where all ok, but when i try to flash the phone this error occurs.

Thread Error: The handle is invalid (6)

gbluez · 06-23-2011, 03:46

HTI is support dct4 adsp flashing.
checking current version issue..

06-19-2011, 12:02	#1 (permalink)
com12gsm Freak Poster Join Date: Aug 2010 Location: STANDALONE Posts: 380 Member: 1366426 Status: Offline Thanks Meter: 39	MXBox need help (ANSWERED) Nokia 9500 RA-2 Does it support by flashing????? MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 4] - xxxxxxx Using device: HTI BOX, FW ver: 00.17 Driver: USBUHCI:WinUSB, ver: 3.5.0.0 Module ver: 1.0.0.17626(14-06-2011), Library ver: 1.0.0.11296(14-06-2011) FLASHBUS not supported.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

06-19-2011, 16:20	#2 (permalink)
shybet No Life Poster Join Date: Apr 2007 Location: Edge of the world Posts: 529 Member: 492380 Status: Offline Thanks Meter: 184	For Comunicator type (9300, 9300i, 9500), you have to flash it with 2 cable, FBus cable and USB data cable (DKU-2) for flashing the ADSP and APE file. here is sample for the file setlist: MCU = RA2_6270.6440 PPM = - CNT = - ADSP = RA2n6270.c01 APE v = RA2n6270.l20 APE u = RA2n6270.u20 Connect the Fbus cable cable to your box, and the DKU-2 cable to USB port of your computer. Click flash. And then just wait 'till the flash process finished. good luck

06-23-2011, 03:46	#6 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	HTI is support dct4 adsp flashing. checking current version issue..