MXKEY, phone does not read - GSM-Forum

Laki1231 · 06-09-2012, 20:55

Hey I have a problem, I have this error, I was looking for solutions and can not do it, sory for my english. WINDOWS 7 Home Premium 64bit

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C08110F6
Using device: HTI, FW ver: 00.50, SN: 00001812
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7601.17514
Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012)
ERROR: Packet Error(0xAA), code 0xC0000002
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
Bad contact, TX line remains low !
VCC_PH BSI TX RX RX2 CLK
1 0 0 1 1 0
ERROR: bootstrap failed!

::Evari77:: · 06-10-2012, 07:17

try to change cable or make investigation what is problem
take a working phone try to boot then post log

Laki1231 · 06-10-2012, 08:04

After the USB works. Because FBUS is not. The FBUS is inserted such a mistake, and without inserted. Is the fault of the cable?

Laki1231 · 06-10-2012, 12:41

Thanks, I put a new plug and it works

06-09-2012, 20:55	#1 (permalink)
Laki1231 Junior Member Join Date: Jan 2011 Posts: 5 Member: 1485361 Status: Offline Thanks Meter: 0	MXKEY, phone does not read Hey I have a problem, I have this error, I was looking for solutions and can not do it, sory for my english. WINDOWS 7 Home Premium 64bit MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C08110F6 Using device: HTI, FW ver: 00.50, SN: 00001812 Connection status: UHCI:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7601.17514 Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012) ERROR: Packet Error(0xAA), code 0xC0000002 ERROR: Packet Error(0xAA), code 0xC0000002 Error details: Bad contact, TX line remains low ! VCC_PH BSI TX RX RX2 CLK 1 0 0 1 1 0 ERROR: bootstrap failed!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
6110 power does not stay on	sc~micro	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-30-2014 08:14

06-10-2012, 07:17	#2 (permalink)
::Evari77:: No Life Poster Join Date: Jul 2005 Location: Tanzania Posts: 561 Member: 161280 Status: Offline Sonork: 100.1616990 Thanks Meter: 82	try to change cable or make investigation what is problem take a working phone try to boot then post log

06-10-2012, 08:04	#3 (permalink)
Laki1231 Junior Member Join Date: Jan 2011 Posts: 5 Member: 1485361 Status: Offline Thanks Meter: 0	After the USB works. Because FBUS is not. The FBUS is inserted such a mistake, and without inserted. Is the fault of the cable?

06-10-2012, 12:41	#4 (permalink)
Laki1231 Junior Member Join Date: Jan 2011 Posts: 5 Member: 1485361 Status: Offline Thanks Meter: 0	Thanks, I put a new plug and it works