N95 camera problem - Failed to read DCC data. (ANSWERED)

[Destinycz]

Hi, I have a Nokia N95 (RM-159) and I have a problem with the camera. The display shows that I can take photos but after clicking the photo to only focus and nothing happens no picture only focus.

I flash the phone and I made mxkey test photo.

here is the result:

Phone Type: RM-159 (Nokia N95)
SW Version: V 06wk41v64.23 05-11-09 RM-159 (c) Nokia
Imei plain: 3530940*******
Product Code: 0548364
Battery voltage: 3733 mV, current: 0 mA
ApeCoreSw: 35.0.002
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 3530940*******
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
Failed to read DCC data.
Scanning DCC from EEPROM ...
DCC data is absent on EEPROM.

Thanks

[shybet]

Bro, N95 don't have DCC file.
Try to downgrade firmware, your problem will solved.

good luck.

[shybet]

Or maybe you can try to write this camera_control.ini file to your phone.

N95 (RM-159) Camera_control.ini.zip

[alkhaleejmobile]

write a good pm,,will be ok,

[alkhaleejmobile]

also must check ,yr flat cable,

[alkhaleejmobile]

if still u must change crystal shuuter ic ,near camera connector

[gbluez]

such phone is not use DCC. most case, came from flexible cable.

BR