Nokia 110 (RM-827) Successfully Flashed Via USB With MXBOX - GSM-Forum

~The JoKeR~ · 10-18-2012, 06:11

Nokia 110 (RM-827) Successfully Flashed Via USB With MXBOX

MXKEY [MxKey Team HTI PLUS Flasher Interface 3], SN: C086CC02
Using device: USB ROM and HTI, FW ver: 00.50, SN: 010016AD
Connection status: EHCI:HUB:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.49
EBL version: Quantum_Bootloader_10.49_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35325705000666
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_35325705000666_ back.RPL"
Processing file: rm827__03.04.mcusw
Downloading item CODE:rm827__03.04.mcusw_ebl_psi.fls, num block: 4, size: 26 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.374 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.434 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.571 s
Erasing area 0x40280000-0x41B3FFFE ...OK
Programming completed in 35.332 s
Checksum verified (0x74A0)
Processing file: rm827__03.04.ppm_m4
Downloading item CUST

ackage_m4.ppm_ebl_psi.fls, num block: 1, size: 3.51 MB
Erasing area 0x41BC0000-0x41F40996 ...OK
Programming completed in 5.141 s
Checksum verified (0xA432)
Processing file: rm827__03.04.image_m4_059N407
Downloading item CUST

ackage_m4_059N407.image.fls, num block: 1, size: 13.88 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 19.868 s
Checksum verified (0xED62)
Total time for flashing process(boot+erase+write) was 7 min 12.327 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-00 USB Phonet, PORT_ID: 25263E7B
Verifying communication to device OK.

Phone type: RM-827 (Nokia 110)
SW version: V 03.04 20-04-12 RM-827 (c) Nokia
Imei plain: 35325705000666-6
Product code: 059N2R0
Battery voltage: 5054 mV, current: 177 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: M4
Language Pack:
- not available.

Camera config: NI00CS0000040C21AC67, ver: 004.032

Imei net: 35325705000666
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.117 s

FREDDIE GTY · 10-18-2012, 07:16

Quote:

Originally Posted by IRFAN_THE_KING

Nokia 110 (RM-827) Successfully Flashed Via USB With MXBOX

MXKEY [MxKey Team HTI PLUS Flasher Interface 3], SN: C086CC02
Using device: USB ROM and HTI, FW ver: 00.50, SN: 010016AD
Connection status: EHCI:HUB:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.49
EBL version: Quantum_Bootloader_10.49_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35325705000666
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_35325705000666_ back.RPL"
Processing file: rm827__03.04.mcusw
Downloading item CODE:rm827__03.04.mcusw_ebl_psi.fls, num block: 4, size: 26 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.374 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.434 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.571 s
Erasing area 0x40280000-0x41B3FFFE ...OK
Programming completed in 35.332 s
Checksum verified (0x74A0)
Processing file: rm827__03.04.ppm_m4
Downloading item CUST

ackage_m4.ppm_ebl_psi.fls, num block: 1, size: 3.51 MB
Erasing area 0x41BC0000-0x41F40996 ...OK
Programming completed in 5.141 s
Checksum verified (0xA432)
Processing file: rm827__03.04.image_m4_059N407
Downloading item CUST

ackage_m4_059N407.image.fls, num block: 1, size: 13.88 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 19.868 s
Checksum verified (0xED62)
Total time for flashing process(boot+erase+write) was 7 min 12.327 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-00 USB Phonet, PORT_ID: 25263E7B
Verifying communication to device OK.

Phone type: RM-827 (Nokia 110)
SW version: V 03.04 20-04-12 RM-827 (c) Nokia
Imei plain: 35325705000666-6
Product code: 059N2R0
Battery voltage: 5054 mV, current: 177 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: M4
Language Pack:
- not available.

Camera config: NI00CS0000040C21AC67, ver: 004.032

Imei net: 35325705000666
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.117 s

i wonder how you flashed this phone via usb when phone doesnt have usb port so can u pliz clarify on the way how you flashed this phone becoz it has no usb port.

.:SUBRATA:. · 10-18-2012, 07:24

Quote:

Originally Posted by FREDDIE GTY

i wonder how you flashed this phone via usb when phone doesnt have usb port so can u pliz clarify on the way how you flashed this phone becoz it has no usb port.

Yes, phone has inner USB Pinout not usb port, search for its pinout.

R@jusat · 10-18-2012, 07:25

Quote:

Originally Posted by FREDDIE GTY

i wonder how you flashed this phone via usb when phone doesnt have usb port so can u pliz clarify on the way how you flashed this phone becoz it has no usb port.

solder usb cable in pinout

.::ZUBER::. · 10-18-2012, 08:06

Quote:

Originally Posted by FREDDIE GTY

i wonder how you flashed this phone via usb when phone doesnt have usb port so can u pliz clarify on the way how you flashed this phone becoz it has no usb port.

Quote:

Originally Posted by .:SUBRATA:.

Yes, phone has inner USB Pinout not usb port, search for its pinout.

Quote:

Originally Posted by R@jusat

solder usb cable in pinout

No need to Wonder,
FBus Cable with USB Socket instead of RJ45 already available in market,
Have to Select Nokia USB ROM on Interface,
So the Logs will be of USB Interface.

BR,
ZUBER

.::ZUBER::. · 10-18-2012, 08:08

Quote:

Originally Posted by IRFAN_THE_KING

Nokia 110 (RM-827) Successfully Flashed Via USB With MXBOX

Nice Bro.

Keep it up,

You can share this here too: http://forum.gsmhosting.com/vbb/f550...-mxkey-767051/

BR,
ZUBER

RASHEDBD57 · 10-18-2012, 08:32

Yes, phone has inner USB Pinout not usb port, search for its pinout.

~The JoKeR~ · 10-18-2012, 13:57

Quote:

Originally Posted by FREDDIE GTY

i wonder how you flashed this phone via usb when phone doesnt have usb port so can u pliz clarify on the way how you flashed this phone becoz it has no usb port.

phone has inner USB Pinout not usb port

.::MASTER ALONE::. · 10-18-2012, 18:49

Quote:

Originally Posted by RASHEDBD57

Yes, phone has inner USB Pinout not usb port, search for its pinout.

Not waste your time purchase new one Fbus to usb port cable Already available in market gpg brand That's All.

BR.
Arsalan gsm2000.

..::My3gtech::.. · 11-15-2012, 18:22

Hi friends i need help my nokia 110 is not connected with mxbox i use nokia c2-00 USB phonet 1655D7F9 as interface but not success full the phone does not show any info always searching usb device i want to reset security code of it please help me how can i do it ???????????????

.::ZUBER::. · 11-16-2012, 20:58

Quote:

Originally Posted by ..::My3gtech::..

Hi friends i need help my nokia 110 is not connected with mxbox i use nokia c2-00 USB phonet 1655D7F9 as interface but not success full the phone does not show any info always searching usb device i want to reset security code of it please help me how can i do it ???????????????

I don't know much more about this Cable,

But most of the Users facing problem with it,

Better use FBus Cable available in Market.

BR,
ZUBER

..::My3gtech::.. · 11-22-2012, 13:56

I try to search RJ45 cable in the market but it's not available in the whole market can u tell me that if we try to connect the wires with solder on pcb board then it can help us or not ??????

**Nizda Mobile** · 11-22-2012, 14:08

Quote:

Originally Posted by ..::My3gtech::..

I try to search RJ45 cable in the market but it's not available in the whole market can u tell me that if we try to connect the wires with solder on pcb board then it can help us or not ??????

you can buy from here Nokia 110 Flashing Cable - Nokia Fbus Cable - Cables

BR
Nizda Mobile

juniour tech · 11-27-2012, 18:52

this is pinout for nokia 110..

10-18-2012, 06:11	#1 (permalink)
~The JoKeR~ No Life Poster Join Date: Jun 2009 Posts: 738 Member: 1051835 Status: Offline Sonork: 100.1594332 Thanks Meter: 514	Nokia 110 (RM-827) Successfully Flashed Via USB With MXBOX Nokia 110 (RM-827) Successfully Flashed Via USB With MXBOX MXKEY [MxKey Team HTI PLUS Flasher Interface 3], SN: C086CC02 Using device: USB ROM and HTI, FW ver: 00.50, SN: 010016AD Connection status: EHCI:HUB:HUB::USB 1.10 (Full-speed) Driver: NMWCD, ver: 7.1.32.75 Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012) Make sure USB cable, Battery and charger are removed from device. Insert USB cable, Battery back to device(make sure to have fully charged battery). Insert Charger or Press phone's power button(if flashing doesnt start automatically) Waiting for USB ROM device ... Device synchronized. CPU: XGOLD 213 Using embedded SBL from MCU. Sending EBL Loader...OK Sending EBL ...OK Getting EBL Version ... Boot mode: 0xCC EBL version major/minor: 10.49 EBL version: Quantum_Bootloader_10.49_M1S1 Protocol version suggested by phone: 3 Set baud rate to: 6.50 Mbit/s Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits] CFI information: Flash settings: 0/1024, size: 0x04000000 1 Block regions: 512 x 0x00020000 = 0x04000000 EBL ready ! Original IMEI: 35325705000666 IMEI_DATA saved OK CCC_DATA saved OK HWC_DATA saved OK RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_35325705000666_ back.RPL" Processing file: rm827__03.04.mcusw Downloading item CODE:rm827__03.04.mcusw_ebl_psi.fls, num block: 4, size: 26 MB Erasing area 0x40000000-0x4001FFFE ...OK Programming completed in 0.374 s Erasing area 0x40040000-0x4005FFFE ...OK Programming completed in 0.434 s Erasing area 0x40060000-0x4015FFFE ...OK Programming completed in 1.571 s Erasing area 0x40280000-0x41B3FFFE ...OK Programming completed in 35.332 s Checksum verified (0x74A0) Processing file: rm827__03.04.ppm_m4 Downloading item CUSTackage_m4.ppm_ebl_psi.fls, num block: 1, size: 3.51 MB Erasing area 0x41BC0000-0x41F40996 ...OK Programming completed in 5.141 s Checksum verified (0xA432) Processing file: rm827__03.04.image_m4_059N407 Downloading item CUSTackage_m4_059N407.image.fls, num block: 1, size: 13.88 MB Erasing area 0x421C0000-0x43E1FFFE ...OK Programming completed in 19.868 s Checksum verified (0xED62) Total time for flashing process(boot+erase+write) was 7 min 12.327 s Waiting for USB device removal ... Waiting for device boot up ... Device connected: nmwcdc\Nokia C2-00 USB Phonet, PORT_ID: 25263E7B Verifying communication to device OK. Phone type: RM-827 (Nokia 110) SW version: V 03.04 20-04-12 RM-827 (c) Nokia Imei plain: 35325705000666-6 Product code: 059N2R0 Battery voltage: 5054 mV, current: 177 mA Cellular system: GSM ASIC ID: 0x0000, type: 11 Ppm Id: M4 Language Pack: - not available. Camera config: NI00CS0000040C21AC67, ver: 004.032 Imei net: 35325705000666 Version: SIMLOCK SERVER Provider: GSM Test Operator Counter: 0/3, 0/10 CONFIG_DATA: 0010100000000000 PROFILE_BITS: 800000000004000B BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN FULL FACTORY... OK USER DATA... OK LEAVE FACTORY... OK SERVICE CENTER... OK SOFTWARE UPGRADE... OK PRODUCTION TUNING... OK Reset User Code (to default:12345) ... OK Completed in 0.117 s

10-18-2012, 08:32	#7 (permalink)
RASHEDBD57 Junior Member Join Date: May 2010 Posts: 37 Member: 1298600 Status: Offline Sonork: 12 Thanks Meter: 17	Yes, phone has inner USB Pinout not usb port, search for its pinout.

11-15-2012, 18:22	#10 (permalink)
..::My3gtech::.. No Life Poster Join Date: Jul 2005 Location: Mobile solution at Pak_Lahore Age: 46 Posts: 979 Member: 158032 Status: Offline Thanks Meter: 331	Hi friends i need help my nokia 110 is not connected with mxbox i use nokia c2-00 USB phonet 1655D7F9 as interface but not success full the phone does not show any info always searching usb device i want to reset security code of it please help me how can i do it ???????????????

11-22-2012, 13:56	#12 (permalink)
..::My3gtech::.. No Life Poster Join Date: Jul 2005 Location: Mobile solution at Pak_Lahore Age: 46 Posts: 979 Member: 158032 Status: Offline Thanks Meter: 331	I try to search RJ45 cable in the market but it's not available in the whole market can u tell me that if we try to connect the wires with solder on pcb board then it can help us or not ??????