nokia 1800 flash ok but not on.

[SHIBLU]

nokia 1800 flash ok but not on.

here is flashing log:-

Backup saved to "C:\mobileEx\3.5\data\backup\XGOLD_RM-653_84CD07361CEE974D_IMEI.back"
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C085F7C0
Using device: HTI, FW ver: 00.50, SN: 0000C540
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20769(01-04-2012), Library ver: 1.0.0.14022(01-04-2012)
Device synchronized.
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.19
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 0020 88C0 - 23280003 [ST M58MWR064FU,64 Mbits]
CFI information:
Flash settings: 0/1, size: 0x00800000
2 Block regions:
127 x 0x00010000 = 0x007F0000
8 x 0x00002000 = 0x00010000
EBL ready !
Processing file: rm653_005.800
Downloading item CODE:hw_b2_rm653_r05.800.fls, num block: 3, size: 4.10 MB
Erasing area 0x00800000-0x00A0FFFE ...OK
Programming completed in 43.687 s
Erasing area 0x00C60000-0x00E68CBE ...OK
Programming completed in 43.640 s
Erasing area 0x00FFC000-0x00FFC03E ...OK
Programming completed in 0.156 s
Error reading checksum!
Processing file: rm653_005.80ed
Downloading item CUST:hw_b2_rm653_005.80ed.fls, num block: 1, size: 2.18 MB
Erasing area 0x00210000-0x0043E23E ...OK
Programming completed in 39.110 s
Checksum mismatch: Phone calculated 0x0044, software calculated 0x66F3
Processing file: rm6530_nai05.80ed
Downloading item CUST:hw_b2_rm6530_nai05.80ed.fls, num block: 1, size: 330.77 KB
Erasing area 0x00EB0000-0x00F01DFE ...OK
Programming completed in 6.438 s
Checksum mismatch: Phone calculated 0x00F1, software calculated 0x5348
Total time for flashing process(boot+erase+write) was 3 min 50.500 s


Phone type: RM-653
SW version: V 05.80 06-08-10 RM-653 (c) Nokia
Imei plain: 35626504221174-7
Product code: 0594931
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: ED
Language Pack:
English,Croatian,German,Slovenian,Albanian,Macedon ian


Imei net: 35626504221174
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000030002

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 2.203 s

[.::ZUBER::.]

Brother, run self test to resolve issue if appears Local or Test Mode.

BR,

[~The JoKeR~]

100000000000% LCD problem.

[kifayatjan]

yes broter check lcd wayes.....

[habibkhalil]

Originally Posted by IRFAN_THE_KING

100000000000% LCD problem.

it can be also sw version it happened for me

[amc_khan]

lcd problem bro Chang lcd and your problem solv

[iftikhar_246]

chek lcd ways problem chek all print lcd conacter

[gamer2012]

phoone storry before flash???if its not power on that is 14000% lcd if power on than try other version flash with factory reset

[globalcom99]

change lcd only soulation

[market feedback]

better u check for selftest. if lcd test passes then rehot Xgold IC
if lcd test fail, means u need to change lcd.

Good luck

[guru4gsm]

Did you try to change LCD.......?

[solitaire09]

post log phone info
are the lcd version found?

[gbluez]

- update your mobileex to 3.2rev21.
- try other firmware version for your phone.

[shafi_136]

100000000000% LCD problem

[lilong_lee]

brother befor you recieve what will happened,is okay or dead ifis nokia only before you recieve that is 50% hardware or software try flash with latest version if same that is hardware problem...................lcd or lcd resestor good luck.....



lilong lee