nokia 5220

[hanyalsaidi]

Phone Type: RM-411 (Nokia 5220 XpressMusic)
SW Version: V 07.23 17-07-09 RM-411 (c) Nokia
Imei plain:
Product Code: 0564104
Language Pack:
- not available.

This phone have PM308 protected, SD security in not restorable.
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net:
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

[hanyalsaidi]

JAF version 1.98.64
Detected PKEY: 9000C30D
Card life counter: 81.89%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.16.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 07.23
17-07-09
RM-411
(c) Nokia
HW version: 1000
PCI version:
RFIC version:  064c0601
DSP version: 
ICPR72_09w17
LCD version: SHARP
PPM version: V 07.23
17-07-09
RM-411
(c) Nokia
MA
BT MCM version: 2222-143C
Retu version: 15
Tahvo version: 22
Content Pack version: Content: ma_a_blue
V 07.23
17-07-09
RM-411
(c) Nokia

Production serial number: DTB829661
Product code: 0564104
Module code: 0203661
Basic production code: 0554881
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 353662010399558
IMEI spare to net: 3A 35 66 02 01 93 59 05
IMEI SV to net: 33 35 66 02 01 93 59 45 F0

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-411.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0564104
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-411\

Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-411\
Scanning ini files...
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-411\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-411\rm411__07.23.mcusw
PPM Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-411\rm411__07.23.ppm_ma
CNT Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-411\rm411__07.23.image_ma_a_blue
APE Variant file: NONE
Languages in ppm: English,Arabic,French
Done!

[hanyalsaidi]

but it is contact service

[h_mobiles]

REPAIR SD check with SUPER SD AUTH if you get correct SD do PMM AUTH and then write PM 1 to 309 with sx4

[Andra]

1.do SX-4 and write PM without [308] area
in case after Superdongle repair , please use "SUPER SD Auth"

2.Check BB5 Secure Validation
[MXKEY - INFO] !!! NEW magic button inside mxkey !!!

3."Recover CERT" doesn't work ??

Begin Certificate Request ...
Connecting to server ...OK, Login ...
ERROR: No certificate found in the database !

Just in case if Recovery via Server doesn't work.......
need more file about CCC,HWC and VARIANT
[MXKEY - SERVER UPDATE] Solved "SECURITY_TEST failed!" after SD repair


br,