Nokia 6680 Flashing

[sonicpromo]

Hi there,

Please can someone help me flash a Nokia 6680. Im new to MX key & Nokia unlocking & need to know where to put the flash files for this phone. & how to flash phone step by step.

The phone i want to flash is Nokia 6680 v4.04.07 rm 36

I have downloaded the following files.
0520999- Euro1 Silver/Blue

rm36_5.050440_b5.c0r
RM36_5.050440_B5.v02
RM36_0520999_5.04.40_100.dcp
RM36_0520999_5.04.40_100_signature.bin
RM36_0520999_5.04.40_100.vpl

Please can someone help me by telling me where to put each of these files & what is the best procedure for flashing this phone.

Your help will be gratefully received

Many Thanks

Darren

[ebynel]

Originally Posted by sonicpromo

Hi there,

Please can someone help me flash a Nokia 6680. Im new to MX key & Nokia unlocking & need to know where to put the flash files for this phone. & how to flash phone step by step.

The phone i want to flash is Nokia 6680 v4.04.07 rm 36

I have downloaded the following files.
0520999- Euro1 Silver/Blue

rm36_5.050440_b5.c0r
RM36_5.050440_B5.v02
RM36_0520999_5.04.40_100.dcp
RM36_0520999_5.04.40_100_signature.bin
RM36_0520999_5.04.40_100.vpl

Please can someone help me by telling me where to put each of these files & what is the best procedure for flashing this phone.

Your help will be gratefully received

Many Thanks

Darren

Follow this instruction.
1. Connect Ufs or Jaf to your pc
2.Open Mxkey MobileEX
3. Click on Connection interface and select the ufs or Jaf box you connected, then click connect.
4.Click on Option and double click on Nokia service tool.
5.Select BB5 on Generation menu.
6.Under file setting, Double click on MCU and insert the 6680 mcu file. do the same on PPM and CNT. but you can flash the phone without CNT file.
7. Connect your phone and click on Bus check and see the phone is connected.
8.Click Flash and wait till flash finish.
9.You can do factory setting on .....
10 Click on Service, then enable full factory and click reset selected.
8. To Unlock, Click on Service>Imei&Security>Simlock>Update splock.

NB:Remember to change to Dct4 when you want to flash or unlock Dct4 phones on Generation menu.
hope my little guideline will help you.

[sonicpromo]

Hi,

Thanks for your help.

Which of the files below is the MCU, PPM & CNT?

This is what ive downloaded from support

0520999- Euro1 Silver/Blue

rm36_5.050440_b5.c0r
RM36_5.050440_B5.v02
RM36_0520999_5.04.40_100.dcp
RM36_0520999_5.04.40_100_signature.bin
RM36_0520999_5.04.40_100.vpl

Let me know

Thanks

Darren

[ebynel]

Originally Posted by sonicpromo

Hi,

Thanks for your help.

Which of the files below is the MCU, PPM & CNT?

This is what ive downloaded from support

0520999- Euro1 Silver/Blue

rm36_5.050440_b5.c0r
RM36_5.050440_B5.v02
RM36_0520999_5.04.40_100.dcp
RM36_0520999_5.04.40_100_signature.bin
RM36_0520999_5.04.40_100.vpl

Let me know

Thanks

Darren

RM36_5.050440_B5.v02 MCU
rm36_5.050440_b5.c0r PPM
Dont forget to press thank button if this help you.

[Still Newbie]

rm36_5.050440_b5.c0r ----------- MCU
RM36_5.050440_B5.v02 ----------- PPM
RM36_0520999_5.04.40_100.dcp ---------- Product Profile / Configuration
RM36_0520999_5.04.40_100_signature.bin ---------- signature
RM36_0520999_5.04.40_100.vpl -------------- Market Setting

No need CNT for this phone

Regards,
Still Newbie

[ebynel]

i made a mistake on mcu and ppm selection.

[sonicpromo]

ADSP = RM36_0520999_5.04.40_100.dcp ---------- Product Profile / Configuration
APE V = RM36_0520999_5.04.40_100_signature.bin ---------- signature
APE u = RM36_0520999_5.04.40_100.vpl -------------- Market Setting

Is this correct?

Please let me know

Thanks for your help

Thanks

Darren