nokia c1-01 how to flash with mxkey??? (ANSWERED) - GSM-Forum

m_ozair143 · 03-05-2011, 08:13

how to flash nokia c1-01 with mxkey any solution ??????

Library version: 1.0.0.9274(01-03-2011), 1.0.0.15761(01-03-2011)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 304D3565
WriteDevice failed: Failed to read/write device

alamgarh · 03-05-2011, 08:21

Quote:

Originally Posted by m_ozair143

how to flash nokia c1-01 with mxkey any solution ??????

Library version: 1.0.0.9274(01-03-2011), 1.0.0.15761(01-03-2011)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 304D3565
WriteDevice failed: Failed to read/write device

bro u must tickmark check X-GOLD then try it

AQIB MALIK · 03-05-2011, 10:52

Quote:

Originally Posted by m_ozair143

how to flash nokia c1-01 with mxkey any solution ??????

Library version: 1.0.0.9274(01-03-2011), 1.0.0.15761(01-03-2011)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 304D3565
WriteDevice failed: Failed to read/write device

dear same problem with me.....!!! and my cell is power off after hang

adnon · 03-05-2011, 10:56

Nokia C1-01 is BB5 set but unfortunately MX Key is unable to do any action till date...

ayaz ali · 03-05-2011, 11:10

same to me but bb5 tool woking good

IFTIKHAR_338 · 04-17-2011, 11:07

c1-01 is bb5 fone & i ca,nt see xgold click in usb mode with mx key

gbluez · 04-17-2011, 12:28

Quote:

Originally Posted by IFTIKHAR_338

c1-01 is bb5 fone & i ca,nt see xgold click in usb mode with mx key

repeat operation by using this version:
- download current version, click here
- do module update click here

BR

shakeel145 · 04-20-2011, 07:50

after update same result plz help mex key

asarmen · 04-20-2011, 08:00

yes.. no result after update. UB can flash 10000% tested c1-01 rm-607

asarmen · 04-20-2011, 08:02

http://forum.gsmhosting.com/vbb/f550...ailed-1249730/

recoshaa · 05-27-2011, 18:27

it seems this problem is bigger than i thought have tryed and am having the same problem aswell mx team need to fix

gbluez · 05-27-2011, 20:37

hi, what fix?

i repost my own post here for you

hi,
hope this will answer to all C1-01 questions

USB Flashing

Code:

MXKEY Serial: [MxKey HTI FLASHER INTERFACE 0] - C0696666
Driver: NMWCD, ver: 7.1.32.62, NTMP ver: 
Module ver: 1.0.0.16662(04-05-2011), Library ver: 1.0.0.9921(04-05-2011)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 26212134
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 2.3
 EBL version : Quantum_Bootloader_2.3_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6500000
Flash ID: 00EC 3012 [Samsung ]
Processing file: rm607__04.40.mcusw
 Downloading item CODE:rm607__04.40.mcusw_ebl_psi.fls, num block: 5, size: 25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.561 s
Erasing area 0x40040000-0x4007FFFE ...OK
Programming completed in 0.769 s
Erasing area 0x40080000-0x4009FFFE ...OK
Programming completed in 0.574 s
Erasing area 0x400A0000-0x4019FFFE ...OK
Programming completed in 1.919 s
Erasing area 0x40400000-0x41B7FFFE ...OK
Programming completed in 32.976 s
Checksum verified (0xD471)
Processing file: rm607__04.40.ppm_x
 Downloading item CUST:package_x.ppm_ebl_psi.fls, num block: 1, size: 4.10 MB
Erasing area 0x41C00000-0x42019006 ...OK
Programming completed in 6.005 s
Checksum verified (0xBE9A)
Processing file: rm607__04.40.image_x_0595594
 Downloading item CUST:package_x_0595594.image.fls, num block: 1, size: 13.63 MB
Erasing area 0x42200000-0x43E5FFFE ...OK
Programming completed in 19.101 s
Checksum verified (0x971B)
Total time for flashing process(boot+erase+write) was 3 min 28.885 s
Waiting for device boot up ...
Device found: nmwcdc\Nokia C1-01 USB Phonet, PORT_ID: 434E537
Verifying communication to device OK.
 
 
Phone Type: RM-607 (C1-01)
SW Version: V 04.40 23-02-11 RM-607 (c) Nokia             
Imei plain: 35700904550046-9
Product Code: 059F0V3
Battery voltage: 3979 mV, current: 102 mA
Language Pack:
- not available.

This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !
 
Imei net: 35700904550046
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
 
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

USB - USER CODE READ
Load market, do buscheck, service tab will be activated

BR

.....::::GsmAdeel:::::..... · 01-28-2012, 16:28

Quote:

Originally Posted by gbluez

hi, what fix?

i repost my own post here for you

hi,
hope this will answer to all C1-01 questions

USB Flashing

Code:

MXKEY Serial: [MxKey HTI FLASHER INTERFACE 0] - C0696666
Driver: NMWCD, ver: 7.1.32.62, NTMP ver: 
Module ver: 1.0.0.16662(04-05-2011), Library ver: 1.0.0.9921(04-05-2011)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 26212134
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 2.3
 EBL version : Quantum_Bootloader_2.3_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6500000
Flash ID: 00EC 3012 [Samsung ]
Processing file: rm607__04.40.mcusw
 Downloading item CODE:rm607__04.40.mcusw_ebl_psi.fls, num block: 5, size: 25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.561 s
Erasing area 0x40040000-0x4007FFFE ...OK
Programming completed in 0.769 s
Erasing area 0x40080000-0x4009FFFE ...OK
Programming completed in 0.574 s
Erasing area 0x400A0000-0x4019FFFE ...OK
Programming completed in 1.919 s
Erasing area 0x40400000-0x41B7FFFE ...OK
Programming completed in 32.976 s
Checksum verified (0xD471)
Processing file: rm607__04.40.ppm_x
 Downloading item CUST:package_x.ppm_ebl_psi.fls, num block: 1, size: 4.10 MB
Erasing area 0x41C00000-0x42019006 ...OK
Programming completed in 6.005 s
Checksum verified (0xBE9A)
Processing file: rm607__04.40.image_x_0595594
 Downloading item CUST:package_x_0595594.image.fls, num block: 1, size: 13.63 MB
Erasing area 0x42200000-0x43E5FFFE ...OK
Programming completed in 19.101 s
Checksum verified (0x971B)
Total time for flashing process(boot+erase+write) was 3 min 28.885 s
Waiting for device boot up ...
Device found: nmwcdc\Nokia C1-01 USB Phonet, PORT_ID: 434E537
Verifying communication to device OK.
 
 
Phone Type: RM-607 (C1-01)
SW Version: V 04.40 23-02-11 RM-607 (c) Nokia             
Imei plain: 35700904550046-9
Product Code: 059F0V3
Battery voltage: 3979 mV, current: 102 mA
Language Pack:
- not available.

This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !
 
Imei net: 35700904550046
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
 
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

USB - USER CODE READ
Load market, do buscheck, service tab will be activated

BR

Don;t Try To Cheape Info Again Ok All

X-GOLD Option Only DC4 Series Not a BB5 series

gbluez · 01-28-2012, 16:51

Quote:

Originally Posted by Mughal_online

Don;t Try To Cheape Info Again Ok All

X-GOLD Option Only DC4 Series Not a BB5 series

no matter DCT4/BB5 selection, mobileex auto select it's loader should be use.
do you have any problem with this?

gombe · 02-27-2012, 17:32

thanks for usefuul post

03-05-2011, 08:13	#1 (permalink)
m_ozair143 Registered User Join Date: Nov 2010 Location: talamba punjab pakistan Age: 34 Posts: 246 Member: 1437921 Status: Offline Sonork: 100.1668345 Thanks Meter: 13	nokia c1-01 how to flash with mxkey??? (ANSWERED) how to flash nokia c1-01 with mxkey any solution ?????? Library version: 1.0.0.9274(01-03-2011), 1.0.0.15761(01-03-2011) Make sure USB cable, Battery and charger are removed from device. Insert USB cable, Battery back to device(make sure to have fully charged battery). Insert Charger or Press phone's power button(if flashing doesnt start automatically) Waiting for USB device ... Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 304D3565 WriteDevice failed: Failed to read/write device

04-20-2011, 08:00	#9 (permalink)
asarmen Cheater -Don't Deal with him- Join Date: Dec 2006 Location: AM Posts: 356 Member: 410574 Status: Offline Thanks Meter: 139	gbluez yes.. no result after update. UB can flash 10000% tested c1-01 rm-607

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
New Nokia Software!!!!!!!	Jefferson	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	12-30-2016 08:17
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21

03-05-2011, 10:56	#4 (permalink)
adnon No Life Poster Join Date: Jan 2008 Location: Pakistan Posts: 1,623 Member: 682736 Status: Offline Thanks Meter: 457	Nokia C1-01 is BB5 set but unfortunately MX Key is unable to do any action till date...

03-05-2011, 11:10	#5 (permalink)
ayaz ali No Life Poster Join Date: Jun 2006 Location: pakistan Age: 34 Posts: 1,095 Member: 294245 Status: Offline Sonork: 100.1602405 Thanks Meter: 115	same to me but bb5 tool woking good

04-17-2011, 11:07	#6 (permalink)
IFTIKHAR_338 Freak Poster Join Date: Dec 2006 Posts: 346 Member: 411034 Status: Offline Thanks Meter: 26	c1-01 is bb5 fone & i ca,nt see xgold click in usb mode with mx key

04-20-2011, 07:50	#8 (permalink)
shakeel145 No Life Poster Join Date: May 2007 Location: IN {HUMEN}WORLD Posts: 1,812 Member: 510445 Status: Offline Sonork: 100.1638301 Thanks Meter: 353	after update same result plz help mex key

04-20-2011, 08:02	#10 (permalink)
asarmen Cheater -Don't Deal with him- Join Date: Dec 2006 Location: AM Posts: 356 Member: 410574 Status: Offline Thanks Meter: 139	http://forum.gsmhosting.com/vbb/f550...ailed-1249730/

05-27-2011, 18:27	#11 (permalink)
recoshaa Banned Join Date: Mar 2009 Location: paradise Posts: 312 Member: 1000967 Status: Offline Thanks Meter: 27	it seems this problem is bigger than i thought have tryed and am having the same problem aswell mx team need to fix

02-27-2012, 17:32	#15 (permalink)
gombe Junior Member Join Date: Nov 2010 Location: cape town south africa Posts: 27 Member: 1443428 Status: Offline Thanks Meter: 1	thanks for usefuul post