Please Mxkey help on this Problem - GSM-Forum

mobilecitycbk · 06-07-2009, 16:55

Processing file: rm74__5.300
ASIC ID: 0x2031 [UPP4M_v3.1]
u_2nd.fia: [DCT4] version: 4.77.0 revision: 0.7 size: 0x9D0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0001 2C7E [Spansion NS128NA08JWSE] page size: 128 K type: NOR area: 01000000-01FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
u_amd.fia: [DCT4 ALGORITHM] version: 4.77.0 revision: 0.7 size: 0x78B8
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00525E02:4988DA60
Programming MCU ...
rm74__5.300: [DCT4][DCT4 ALGORITHM] (6.78 MB)
Supported Ids: 1131, 1130, 2140, 2141, 2142, 2143, 2031
Area [01000000-01FFFFFF] erased in 1 min 27.953 s
Flash programming ...
Error while programming [1200000] at 0x00000014, Result: 0872
Flashing done with error(s) in 2 min 10.125 s
RX Buffer: 0872

its 6030 Rm-74 in middle of mcu file its stops and says this error

Andra · 06-07-2009, 19:36

- check cable
- try erase flash -> that error or not
- try reflash

br,

mobilecitycbk · 06-08-2009, 17:09

i tried but no result i changed the cable do full erase but no luck thanks for reply

dj_bedhol · 06-09-2009, 00:00

Hardware problem....Flash chip

ohdie · 06-09-2009, 01:26

hardware problem flash ic replace it or reball it

06-07-2009, 16:55	#1 (permalink)
mobilecitycbk No Life Poster Join Date: Mar 2007 Location: IN FRONT OF YOU Age: 44 Posts: 1,403 Member: 475440 Status: Offline Sonork: 1604067 Thanks Meter: 965	Please Mxkey help on this Problem Processing file: rm74__5.300 ASIC ID: 0x2031 [UPP4M_v3.1] u_2nd.fia: [DCT4] version: 4.77.0 revision: 0.7 size: 0x9D0 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164 FlashID0: 0001 2C7E [Spansion NS128NA08JWSE] page size: 128 K type: NOR area: 01000000-01FFFFFF FlashID1: 0000 0001 [unused/removed] ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF u_amd.fia: [DCT4 ALGORITHM] version: 4.77.0 revision: 0.7 size: 0x78B8 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164 Performing Flash Authentication ...OK UEM ID: 00525E02:4988DA60 Programming MCU ... rm74__5.300: [DCT4][DCT4 ALGORITHM] (6.78 MB) Supported Ids: 1131, 1130, 2140, 2141, 2142, 2143, 2031 Area [01000000-01FFFFFF] erased in 1 min 27.953 s Flash programming ... Error while programming [1200000] at 0x00000014, Result: 0872 Flashing done with error(s) in 2 min 10.125 s RX Buffer: 0872 its 6030 Rm-74 in middle of mcu file its stops and says this error

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Please Cyclone Team help on this Problem	mobilecitycbk	Cyclonebox	0	06-07-2009 16:56
Please any help on this	starcell	SAGEM JTAG UNLOCKER	1	03-26-2008 08:55
Furious Help On This Problem Of Semc Unlock	alex12	FuriousGold	3	02-14-2008 23:28

06-07-2009, 19:36	#2 (permalink)
Andra No Life Poster Join Date: Feb 2005 Location: AD Posts: 4,665 Member: 976728 Status: Offline Sonork: 1589709 Thanks Meter: 4,775	- check cable - try erase flash -> that error or not - try reflash br,

06-08-2009, 17:09	#3 (permalink)
mobilecitycbk No Life Poster Join Date: Mar 2007 Location: IN FRONT OF YOU Age: 44 Posts: 1,403 Member: 475440 Status: Offline Sonork: 1604067 Thanks Meter: 965	i tried but no result i changed the cable do full erase but no luck thanks for reply

06-09-2009, 00:00	#4 (permalink)
dj_bedhol Major Poster Join Date: Apr 2008 Location: http://gsmindonesia.com/forum. Posts: 46 Member: 741887 Status: Offline Thanks Meter: 8	Hardware problem....Flash chip

06-09-2009, 01:26	#5 (permalink)
ohdie Freak Poster Join Date: Apr 2007 Location: land of no return Posts: 184 Member: 486967 Status: Offline Sonork: none Thanks Meter: 17	hardware problem flash ic replace it or reball it