Problem reading IDs Nokia 1800 Xgold (ANSWERED)

[hadjimi]

hello ; can someone explain what is this error when trying to read IDs for LBF of Nokia 1800 Xgold

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 5], SN: 
Using device: HTI, FW ver: 00.50, SN: 
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0 
Module ver: 1.0.0.20766(30-03-2012), Library ver: 1.0.0.14016(30-03-2012)
Device synchronized.
CPU: XGOLD 110
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 10.19
 EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 0020 88C0 - 23280003 [ST M58MWR064FU,64 Mbits]
CFI information:
 Flash settings: 0/1, size: 0x00800000
 2 Block regions:
  127 x 0x00010000 = 0x007F0000
  8 x 0x00002000 = 0x00010000
EBL ready !
Dumping secure data ...OK, value: 5
 
Restarting phone ...
ERROR: PMMCAT page not found !

thanks in advance

[gbluez]

Please repeat operation 2-3 times. Sometimes it's work.
Anyway, coder is investigating this matter.

BR

[jacck]

Be careful with reading hash from X-Gold phones like 1616, 1280, 1800 etc.
Many times hash is reading with errors and then none of calculated unlock codes is valid (or calculation ends with no codes).
You may lost your SL3 calculation credits with no result!
There is probably bug in HTI, because hashes readed by Best tool (Infinity) are always good.

[hadjimi]

Originally Posted by gbluez

Please repeat operation 2-3 times. Sometimes it's work.
Anyway, coder is investigating this matter.

BR

thanks for reply , same problem after trying many times
it is working for some phones , but not working for many other phones of the same model 1800

[hadjimi]

please Mr Manole
try to solve this problem

thanks

[msaleem1985]

Sir please let me know when will unlocking release for 1616 Mexican telcel thank you in Advance

[chris2007]

please again to help to unlock this

MXKEY [MxKey Team HTI PLUS Flasher Interface 2], SN: xxxxxxx
Using device: HTI, FW ver: 00.50, SN: xxxxxxx
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Library ver: 1.0.0.14195(13-07-2012)
Device synchronized.
CPU: XGOLD 110
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.19
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 0020 88C0 - 23280003 [ST M58MWR064FU,64 Mbits]
CFI information:
Flash settings: 0/1, size: 0x00800000
2 Block regions:
127 x 0x00010000 = 0x007F0000
8 x 0x00002000 = 0x00010000
EBL ready !
Dumping secure data ...OK, value: 5

Restarting phone ...
ERROR: Unexpected size of SIMLOCK data (0x00) !

we hope will solve soon

thanks

[.::ZUBER::.]

Originally Posted by chris2007

please again to help to unlock this

MXKEY [MxKey Team HTI PLUS Flasher Interface 2], SN: xxxxxxx
Using device: HTI, FW ver: 00.50, SN: xxxxxxx
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Library ver: 1.0.0.14195(13-07-2012)
Device synchronized.
CPU: XGOLD 110
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.19
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 0020 88C0 - 23280003 [ST M58MWR064FU,64 Mbits]
CFI information:
Flash settings: 0/1, size: 0x00800000
2 Block regions:
127 x 0x00010000 = 0x007F0000
8 x 0x00002000 = 0x00010000
EBL ready !
Dumping secure data ...OK, value: 5

Restarting phone ...
ERROR: Unexpected size of SIMLOCK data (0x00) !

we hope will solve soon

thanks

Bro. It's 20 Digits NCK if appears this: ERROR: Unexpected size of SIMLOCK data (0x00) !, Not possible this moment.

BR,
Zuber

[chris2007]

Originally Posted by zuberchowdhry

Bro. It's 20 Digits NCK if appears this: ERROR: Unexpected size of SIMLOCK data (0x00) !, Not possible this moment.

BR,
Zuber

thanks and hope will possible soon