Problems with 1661 rh-122

[yusniel]

Hi, this is log trying to detect 1661-2 rh-122

SCAN log:

Phone type: RH-122
SW version: V 05.01 23-09-09 RH-122 (c) Nokia
Imei plain: 3526760xxxxxxx-x
Product code: 0580314
Cellular system: GSM
ASIC ID: 0x2293, type: 0
Language Pack:
- not available.

Master code: 5754072156

Imei net: 35267604748600
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 000000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

but here comes problems, when try tou BUS CHECK....


BUS CHECK log:

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C081XXXX
Using device: HTI, FW ver: 00.50, SN: 0000XXXX
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20769(01-04-2012), Library ver: 1.0.0.14022(01-04-2012)
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
Error sending bootloader !

Already reinstalled mobilex, and problems stills there.... also, when i try to flash phone occurs same as bus check.....

[.::ZUBER::.]

Bro. This is Because, you have not updated your Mxkey to V3.5 Rev2.1, so better update it & post result.

BR,

[yusniel]

http://forum.gsmhosting.com/vbb/f550...5/#post8176935