n95 cannot flash - GSM-Forum

taritm · 06-28-2010, 11:14

i have flashed n95 with USB cable to upgrade. after flash, its blank. now cannt flash it with usb or fbus cable. With fbus log is here.

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8814(13-06-2010), 1.0.0.14014(13-06-2010)
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 026B3263DD8B7DD8594C93CA5C305CEDC8E28E77
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1DF0010D258500580BBC89900629053FC233F4B1
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 9.50.0 revision: 2.0 size: 0x3B40
Supported RAP Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
New Protocol is not supported for the current interface (UFS_USB V2.8 (c) SarasSoft 2007.).
Please select correct loader version from 'Config' menu !
Flashing terminated with error(s) in 22.890 s
RX Buffer:

hafeez_123 · 06-28-2010, 13:09

dear flash it on fbus cable

taritm · 06-28-2010, 14:38

above log is given of fbus cable

taritm · 06-29-2010, 11:07

now its starts flash but stop giving error. here is log

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8814(13-06-2010), 1.0.0.14014(13-06-2010)
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 026B3263DD8B7DD8594C93CA5C305CEDC8E28E77
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1DF0010D258500580BBC89900629053FC233F4B1
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported RAP Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
FlashID0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: NOR,RAP
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported RAP Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
RAP PAPUBKEYS HASH: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported APE Ids: 24200703, 24200704, 24200705, 24200706
Flashing terminated with error(s) in 1 min 27.937 s
RX Buffer: F372

Andra · 06-29-2010, 20:18

hi,
software already give info about error

Quote:

Please select correct loader version from 'Config' menu !

kindly check or change your "Flash Loader" folder

or try USB as interface

br,

taritm · 06-30-2010, 04:04

i have changed boadloader, it flash eno file but cannot flash mcu file.

06-28-2010, 11:14	#1 (permalink)
taritm Freak Poster Join Date: May 2005 Location: The_Mobile_Pakistan Posts: 240 Member: 145399 Status: Offline Thanks Meter: 26	n95 cannot flash i have flashed n95 with USB cable to upgrade. after flash, its blank. now cannt flash it with usb or fbus cable. With fbus log is here. Using device: UFS_USB V2.8 (c) SarasSoft 2007. Library version: 1.0.0.8814(13-06-2010), 1.0.0.14014(13-06-2010) APE Data : SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2] ASIC MODE ID: 00 PUBLIC ID: 026B3263DD8B7DD8594C93CA5C305CEDC8E28E77 ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 RAP Data : SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11] EM0 ID: 00000295 EM1 ID: 00000B22 PUBLIC ID: 1DF0010D258500580BBC89900629053FC233F4B1 ASIC MODE ID: 00 ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: A8C1D6713E691FF8 SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 9.50.0 revision: 2.0 size: 0x3B40 Supported RAP Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105 New Protocol is not supported for the current interface (UFS_USB V2.8 (c) SarasSoft 2007.). Please select correct loader version from 'Config' menu ! Flashing terminated with error(s) in 22.890 s RX Buffer:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
Nokia Flash Content.	Phantom	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-01-2000 23:28

06-28-2010, 13:09	#2 (permalink)
hafeez_123 Freak Poster Join Date: Sep 2005 Age: 38 Posts: 140 Member: 182839 Status: Offline Thanks Meter: 57	dear flash it on fbus cable

06-28-2010, 14:38	#3 (permalink)
taritm Freak Poster Join Date: May 2005 Location: The_Mobile_Pakistan Posts: 240 Member: 145399 Status: Offline Thanks Meter: 26	above log is given of fbus cable

06-29-2010, 11:07	#4 (permalink)
taritm Freak Poster Join Date: May 2005 Location: The_Mobile_Pakistan Posts: 240 Member: 145399 Status: Offline Thanks Meter: 26	now its starts flash but stop giving error. here is log Using device: UFS_USB V2.8 (c) SarasSoft 2007. Library version: 1.0.0.8814(13-06-2010), 1.0.0.14014(13-06-2010) APE Data : SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2] ASIC MODE ID: 00 PUBLIC ID: 026B3263DD8B7DD8594C93CA5C305CEDC8E28E77 ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 RAP Data : SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11] EM0 ID: 00000295 EM1 ID: 00000B22 PUBLIC ID: 1DF0010D258500580BBC89900629053FC233F4B1 ASIC MODE ID: 00 ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: A8C1D6713E691FF8 SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80 Supported RAP Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105 FlashID0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: NOR,RAP ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000 TransmissionMode: 16Bit Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520 Supported RAP Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105 RAP PAPUBKEYS HASH: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89 TransmissionMode: DDR&TX2 SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00 Supported APE Ids: 24200703, 24200704, 24200705, 24200706 Flashing terminated with error(s) in 1 min 27.937 s RX Buffer: F372

06-30-2010, 04:04	#6 (permalink)
taritm Freak Poster Join Date: May 2005 Location: The_Mobile_Pakistan Posts: 240 Member: 145399 Status: Offline Thanks Meter: 26	i have changed boadloader, it flash eno file but cannot flash mcu file.