GPG Se tool Not Detect Single Phone - GSM-Forum

Chennairam · 07-23-2009, 13:48

Hi friends I Purchase a GPG Se tool Box But i Never to Still didnt Flash Single Phone even Cant Read Security Code also Even From Working hands Set

Great hardware I think good cable Qualities

Here The Log With I try to read Security Code from W300

GPG Industires Box Logs here

7/23/2009 5:50:20 PM v0.915036/UNI
7/23/2009 5:50:20 PM CARD SERIAL: 00113008
7/23/2009 5:50:20 PM Loaded 51 flash descriptors
7/23/2009 5:50:29 PM CFG:000000000000000
7/23/2009 5:50:29 PM Open COM port OK
7/23/2009 5:50:52 PM ChipID:8040,EMP protocol:0301
7/23/2009 5:50:52 PM
7/23/2009 5:50:52 PM PHONE STATE: "RETAIL"
7/23/2009 5:50:52 PM FLASH CID: 0049
7/23/2009 5:50:52 PM Speed:921600
7/23/2009 5:50:55 PM Can't load ID loader !
7/23/2009 5:50:56 PM Elapsed: 27 secs.
7/23/2009 5:50:59 PM CFG:000000000000000
7/23/2009 5:51:01 PM Open COM port OK
7/23/2009 5:51:04 PM ChipID:8040,EMP protocol:0301
7/23/2009 5:51:04 PM
7/23/2009 5:51:04 PM PHONE STATE: "RETAIL"
7/23/2009 5:51:04 PM FLASH CID: 0049
7/23/2009 5:51:04 PM Speed:921600
7/23/2009 5:51:07 PM Can't load ID loader !
7/23/2009 5:51:08 PM Elapsed: 8 secs.
7/23/2009 5:51:09 PM CFG:000000000000000
7/23/2009 5:51:10 PM Open COM port OK
7/23/2009 5:51:21 PM ChipID:8040,EMP protocol:0301
7/23/2009 5:51:21 PM
7/23/2009 5:51:21 PM PHONE STATE: "RETAIL"
7/23/2009 5:51:21 PM FLASH CID: 0049
7/23/2009 5:51:21 PM Speed:921600
7/23/2009 5:51:24 PM Can't load ID loader !
7/23/2009 5:51:25 PM Elapsed: 16 secs.
7/23/2009 5:51:32 PM CFG:000000000000000
7/23/2009 5:51:32 PM Open COM port OK
7/23/2009 5:51:35 PM ChipID:8040,EMP protocol:0301
7/23/2009 5:51:36 PM
7/23/2009 5:51:36 PM PHONE STATE: "RETAIL"
7/23/2009 5:51:36 PM FLASH CID: 0049
7/23/2009 5:51:36 PM Speed:921600
7/23/2009 5:51:39 PM Can't load ID loader !
7/23/2009 5:51:39 PM Elapsed: 6 secs.
7/23/2009 5:51:42 PM CFG:000000000000000
7/23/2009 5:51:43 PM Open COM port OK
7/23/2009 5:51:47 PM ChipID:8040,EMP protocol:0301
7/23/2009 5:51:47 PM
7/23/2009 5:51:47 PM PHONE STATE: "RETAIL"
7/23/2009 5:51:47 PM FLASH CID: 0049
7/23/2009 5:51:47 PM Speed:921600
7/23/2009 5:51:50 PM Can't load ID loader !
7/23/2009 5:51:51 PM Elapsed: 9 secs.
7/23/2009 5:52:10 PM CFG:000000000000000
7/23/2009 5:52:11 PM Open COM port OK
7/23/2009 5:52:19 PM ChipID:8040,EMP protocol:0301
7/23/2009 5:52:19 PM
7/23/2009 5:52:19 PM PHONE STATE: "RETAIL"
7/23/2009 5:52:19 PM FLASH CID: 0049
7/23/2009 5:52:19 PM Speed:921600
7/23/2009 5:52:22 PM Can't load ID loader !
7/23/2009 5:52:23 PM Elapsed: 13 secs.

But same Mobile i have Another Se tool Box Small Size black Code Works Good
Here the log

v0.915037/UNI
CARD SERIAL: 00038092
Loaded 51 flash descriptors
CFG:000000000000000
ChipID:8040,EMP protocol:0301

PHONE STATE: "RETAIL"
FLASH CID: 0049
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35797701693060 CERT:RED
FLASH CID:49 COLOR:RED

Model (from GDFS):W300i
MAPP CXC article: R4EA031 prgCXC1123260_GENERIC_JE
MAPP CXC version: R4EA031
Language Package: S_ASIA_LEVAN
CDA article: CDA102665/110
CDA version: R2A
Default article: cxc1123203
Default version: R4EA031
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:31588

RESTORATION FILE NOT PRESENT
"R4EA031_CXC1123260_GENERIC_JE"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED

Elapsed: 17 secs.

Always GPG prodcuts Create Problem to me

1st i purchased UFC Cable By GPG Still One N95 Not works ... i purchase Ordinary UFC Cable from unknow Manufactures Works Good Still now

Now Fighting with se tool

Unhappy Customer For GPG
Ram

**GPGIndustries** · 07-23-2009, 14:42

Will be too easy to say is not possible... but I don't know what to tell u this time...

We sale like 2000 pcs Setool hardware a month... The only thing I could ask is if u have a way to send me this phone so we can test.

Each hardware is Tested on 2 steps so we can't have defective hardware getting out of the factory. If you have a way to send this phone to one of our resseler I will pay for it and I will be able to test. Sorry this might not help but I don't know what I can tell more. Hardware is defenitly ok otherwise custumers won't be asking our " Gold Box"

Regarding UFC... I have made a lot of videos u can check on

http://www.unifbuscable.com/video.php?page=Video

Other thing I can tell you is bring back to your resseler he will for sure exchange this goods and probably make a demo for you

Best Regards

Chennairam · 07-23-2009, 15:16

Quote:

Originally Posted by GPGIndustries

Will be too easy to say is not possible... but I don't know what to tell u this time...

We sale like 2000 pcs Setool hardware a month... The only thing I could ask is if u have a way to send me this phone so we can test.

Each hardware is Tested on 2 steps so we can't have defective hardware getting out of the factory. If you have a way to send this phone to one of our resseler I will pay for it and I will be able to test. Sorry this might not help but I don't know what I can tell more. Hardware is defenitly ok otherwise custumers won't be asking our " Gold Box"

Regarding UFC... I have made a lot of videos u can check on

http://www.unifbuscable.com/video.php?page=Video

Other thing I can tell you is bring back to your resseler he will for sure exchange this goods and probably make a demo for you

Best Regards

Sorry To Say i Cant send Phone to test because Theat is Customer Mobile

phone is Working perfect Because That Is code Read by my another Se tool Box

SOme Time Shows like This error :-

When i Try to Open a Software its shows like tihis

7/13/2009 5:00:26 PM Severe error (00000006)
7/13/2009 5:00:43 PM Severe error (00000006)
7/13/2009 5:00:51 PM Severe error (00000006)
7/13/2009 5:01:19 PM Severe error (00000006)
7/13/2009 5:02:45 PM Severe error (00000006)
7/13/2009 5:03:45 PM Severe error (00000006)
7/13/2009 5:04:52 PM Severe error (00000006)
7/13/2009 5:06:51 PM Severe error (00000006)
7/13/2009 5:08:40 PM Severe error (00000006)
7/14/2009 6:32:40 PM Severe error (00000006)

I want to Know my box hardware Problem Or ?
7/23/2009 5:50:20 PM v0.915036/UNI
7/23/2009 5:50:20 PM CARD SERIAL: 00113008
7/23/2009 5:50:20 PM Loaded 51 flash descriptors
7/23/2009 5:50:29 PM CFG:000000000000000
7/23/2009 5:50:29 PM Open COM port OK
7/23/2009 5:50:52 PM ChipID:8040,EMP protocol:0301
7/23/2009 5:50:52 PM
7/23/2009 5:50:52 PM PHONE STATE: "RETAIL"
7/23/2009 5:50:52 PM FLASH CID: 0049
7/23/2009 5:50:52 PM Speed:921600
7/23/2009 5:50:55 PM Can't load ID loader !
7/23/2009 5:50:56 PM Elapsed: 27 secs.

What is the meaning Can,t Load ID loader !

Really Strange to work box problem or Cable Problem

for UFC Cable that is old story

GPG UFC Cable useless For me I think !! I am Unhappy !! I think i wasted My Money !!!

**GPGIndustries** · 07-23-2009, 15:25

In case you face again such problem please buy phone for me. I need check if there is a problem.

I have like 10 different SE phone in Factory and no problem. I arrange someone to test each single box of my stock.

And would post here if anything is find.

Once again if u have again this problem please get fone for me.

br

Quote:

Originally Posted by Chennairam

Sorry To Say i Cant send Phone to test because Theat is Customer Mobile

phone is Working perfect Because That Is code Read by my another Se tool Box

SOme Time Shows like This error :-

When i Try to Open a Software its shows like tihis

7/13/2009 5:00:26 PM Severe error (00000006)
7/13/2009 5:00:43 PM Severe error (00000006)
7/13/2009 5:00:51 PM Severe error (00000006)
7/13/2009 5:01:19 PM Severe error (00000006)
7/13/2009 5:02:45 PM Severe error (00000006)
7/13/2009 5:03:45 PM Severe error (00000006)
7/13/2009 5:04:52 PM Severe error (00000006)
7/13/2009 5:06:51 PM Severe error (00000006)
7/13/2009 5:08:40 PM Severe error (00000006)
7/14/2009 6:32:40 PM Severe error (00000006)

I want to Know my box hardware Problem Or ?
7/23/2009 5:50:20 PM v0.915036/UNI
7/23/2009 5:50:20 PM CARD SERIAL: 00113008
7/23/2009 5:50:20 PM Loaded 51 flash descriptors
7/23/2009 5:50:29 PM CFG:000000000000000
7/23/2009 5:50:29 PM Open COM port OK
7/23/2009 5:50:52 PM ChipID:8040,EMP protocol:0301
7/23/2009 5:50:52 PM
7/23/2009 5:50:52 PM PHONE STATE: "RETAIL"
7/23/2009 5:50:52 PM FLASH CID: 0049
7/23/2009 5:50:52 PM Speed:921600
7/23/2009 5:50:55 PM Can't load ID loader !
7/23/2009 5:50:56 PM Elapsed: 27 secs.

What is the meaning Can,t Load ID loader !

Really Strange to work box problem or Cable Problem

for UFC Cable that is old story

GPG UFC Cable useless For me I think !! I am Unhappy !! I think i wasted My Money !!!

Chennairam · 07-23-2009, 15:33

Quote:

Originally Posted by GPGIndustries

In case you face again such problem please buy phone for me. I need check if there is a problem.

I have like 10 different SE phone in Factory and no problem. I arrange someone to test each single box of my stock.

And would post here if anything is find.

Once again if u have again this problem please get fone for me.

br

Thanks For Your kind Reply

But if i Use Intraface Ufs Or USb Works Good

when i am using With Comport with GPG Se tool Box not Detect most of the phones

getting This Error
7/23/2009 5:50:52 PM PHONE STATE: "RETAIL"
7/23/2009 5:50:52 PM FLASH CID: 0049
7/23/2009 5:50:52 PM Speed:921600
7/23/2009 5:50:55 PM Can't load ID loader !
7/23/2009 5:50:56 PM Elapsed: 27 secs.

So problem is K750 cable or Box hardware

**GPGIndustries** · 07-23-2009, 15:39

Are u using the cables delivered with box?... Or u baught interface only?

Quote:

Originally Posted by Chennairam

Thanks For Your kind Reply

But if i Use Intraface Ufs Or USb Works Good

when i am using With Comport with GPG Se tool Box not Detect most of the phones

getting This Error
7/23/2009 5:50:52 PM PHONE STATE: "RETAIL"
7/23/2009 5:50:52 PM FLASH CID: 0049
7/23/2009 5:50:52 PM Speed:921600
7/23/2009 5:50:55 PM Can't load ID loader !
7/23/2009 5:50:56 PM Elapsed: 27 secs.

So problem is K750 cable or Box hardware

Chennairam · 07-23-2009, 15:48

Quote:

Originally Posted by GPGIndustries

In case you face again such problem please buy phone for me. I need check if there is a problem.

I have like 10 different SE phone in Factory and no problem. I arrange someone to test each single box of my stock.

And would post here if anything is find.

Once again if u have again this problem please get fone for me.

br

Thanks For Your kind Reply

But if i Use Intraface Ufs Or USb Works Good

when i am using With Comport with GPG Se tool Box not Detect most of the phones

getting This Error
7/23/2009 5:50:52 PM PHONE STATE: "RETAIL"
7/23/2009 5:50:52 PM FLASH CID: 0049
7/23/2009 5:50:52 PM Speed:921600
7/23/2009 5:50:55 PM Can't load ID loader !
7/23/2009 5:50:56 PM Elapsed: 27 secs.

So problem is K750 cable or Box hardware

morya · 07-23-2009, 15:58

even i have the same problem with many models.

e90 - can't go in LOCAL MODE
K-750 - Can't detect the phone.
3120c -after unlock 1 or 2 pcs pin broke.
j-132 -cant detect the phone.

Chennairam · 07-23-2009, 16:30

Quote:

Originally Posted by GPGIndustries

Are u using the cables delivered with box?... Or u baught interface only?

I Buy Whole Set Fully Box and cables

here the Post screen shot Here :-

W880i Comport 3 Not work with cable

W880i Usf intraface

Here K750i screenshorts

With ufs

Hope you give me a Better Solution to me

Mr.Ultimate · 07-23-2009, 18:22

Quote:

Originally Posted by Chennairam

I Buy Whole Set Fully Box and cables

here the Post screen shot Here :-

W880i Comport 3 Not work with cable

W880i Usf intraface

Here K750i screenshorts

With ufs

Hope you give me a Better Solution to me

Just use USB and all your problems will be gone!!!

Chennairam · 07-24-2009, 03:47

Quote:

Originally Posted by Mariozas

Just use USB and all your problems will be gone!!!

Sir I know Usb it will Work for all model Why should i use usb .... why box comport not work

Nokall · 07-24-2009, 04:35

The Colour from your box it´s white and say setoll 3 ??

I have same problem and i find it´s ftdi chip coming fu...cke...

Cheap things from china it´s only trash

but the problem it´s not from gpg mbut ftdi factory.

Chennairam · 07-24-2009, 05:27

Quote:

Originally Posted by Nokall

The Colour from your box it´s white and say setoll 3 ??

I have same problem and i find it´s ftdi chip coming fu...cke...

Cheap things from china it´s only trash

but the problem it´s not from gpg mbut ftdi factory.

Brother I purchase From Authorised Reseller For GPG

My Box is Gold Color From GPG Prodcuts Only

I am waiting For GPG product manage r Reply for my problem

Jesslin · 07-24-2009, 08:07

Still waiting for a good solution because i have a same problem with 3 setool box gold from gpg.

**GPGIndustries** · 07-24-2009, 17:21

We don't have any problems here. Tested on our stock... I will make video and post here... Like said send me Box + phone so we can test here.

And post results...

Each single Setool is tested with K750 before shipping.

Anyway I trust yours words... but the only think i can do to solve willbe done once I have at least box in hands

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
GPG TMA v2 not detecting [ANSWERED]	sakisager	Latest GPGIndustries News	2	03-26-2010 08:00
SE Tool Not Recognising k700i	shak360	SETool2	0	07-31-2009 18:22
SE TOOL not acknowledging this	MaikonPhone	SETool2	5	09-26-2008 23:33
my dreambox upgraded to db se can not detect sonyericson	EASYTECH	DreamBox	8	03-13-2008 20:53
se t100 not detect sim!!!!!	lucik	Sony Ericsson Hardware Repair Area	3	04-08-2005 13:59

07-23-2009, 14:42	#2 (permalink)
GPGIndustries Product Manager Join Date: Jul 2003 Location: France,China,Dubai,Indonesia Age: 36 Posts: 3,649 Member: 34016 Status: Offline Sonork: 100.67372 Thanks: 1,522 Thanked 23,635 Times in 2,065 Posts	Will be too easy to say is not possible... but I don't know what to tell u this time... We sale like 2000 pcs Setool hardware a month... The only thing I could ask is if u have a way to send me this phone so we can test. Each hardware is Tested on 2 steps so we can't have defective hardware getting out of the factory. If you have a way to send this phone to one of our resseler I will pay for it and I will be able to test. Sorry this might not help but I don't know what I can tell more. Hardware is defenitly ok otherwise custumers won't be asking our " Gold Box" Regarding UFC... I have made a lot of videos u can check on http://www.unifbuscable.com/video.php?page=Video Other thing I can tell you is bring back to your resseler he will for sure exchange this goods and probably make a demo for you Best Regards

07-23-2009, 15:58	#8 (permalink)
morya Freak Poster Join Date: Sep 2005 Location: Trying to be on forum!!! Posts: 138 Member: 183851 Status: Offline Sonork: 100.105150 Thanks: 19 Thanked 17 Times in 12 Posts	even i have the same problem with many models. e90 - can't go in LOCAL MODE K-750 - Can't detect the phone. 3120c -after unlock 1 or 2 pcs pin broke. j-132 -cant detect the phone.

07-24-2009, 04:35	#12 (permalink)
Nokall No Life Poster Join Date: Jun 2002 Location: Portugal Lisbon* Age: 34 Posts: 877 Member: 13223 Status: Offline Thanks: 20 Thanked 47 Times in 30 Posts	The Colour from your box it´s white and say setoll 3 ?? I have same problem and i find it´s ftdi chip coming fu...cke... Cheap things from china it´s only trash but the problem it´s not from gpg mbut ftdi factory.

07-24-2009, 08:07	#14 (permalink)
Jesslin Junior Member Join Date: Jun 2007 Location: Indonesia Posts: 22 Member: 519659 Status: Offline Thanks: 4,419 Thanked 1 Time in 1 Post	Still waiting for a good solution because i have a same problem with 3 setool box gold from gpg.

07-24-2009, 17:21	#15 (permalink)
GPGIndustries Product Manager Join Date: Jul 2003 Location: France,China,Dubai,Indonesia Age: 36 Posts: 3,649 Member: 34016 Status: Offline Sonork: 100.67372 Thanks: 1,522 Thanked 23,635 Times in 2,065 Posts	We don't have any problems here. Tested on our stock... I will make video and post here... Like said send me Box + phone so we can test here. And post results... Each single Setool is tested with K750 before shipping. Anyway I trust yours words... but the only think i can do to solve willbe done once I have at least box in hands