Cant unlock RSA on K750 - GSM-Forum

roniri · 07-07-2005, 12:42

Hi!

I want to decustom k750, flashing arm and rawFS were successfull, but when i try to unlock RSA i got always this:
Ready!
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 36
Phone color: Brown
Trying Brown CID36 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Flash manufacturer: STmicro
Flash ID: 0x200D
OTP CID: 36
Phone hardware initialized OK
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 36
Primary certificate color: Brown
Reading secondary certificate...
Secondary certificate CID: 36
Secondary certificate color: Brown
OSE configuration found.
Analysing GDFS...
Done.
Analyzing RSA protection...
RSA protection is normal.
Use the Unlock RSA function first!
Restarting phone...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet...

Error uploading applet

I dont know, what is the problem, the cable is sure good , because flashing run good , so i need your help!
Regards Roniri

ktalangsm · 07-07-2005, 12:51

I think is this:
Flash manufacturer: STmicro

but not sure at 100%, u triying this in w2000 or Xp...

In w2000, have the same problem in some units, so in Xp problem solved.....

roniri · 07-07-2005, 12:58

Im using windows Xp!

Lead · 07-07-2005, 21:34

Convert the phone to RED and then unlock RSA.
It is a bug.

Lead · 07-07-2005, 21:35

Btw, you don't have to reflash the whole firmware after converting K750/W800 (EROM based phones) to red.

MG77 · 07-08-2005, 12:00

Connecting via UC-10 Universal Cable...
Power on the phone, please!
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 115200Bd
Sony Ericsson phone detected.
Phone CID: 36
Phone color: Red
Trying Red CID36 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 6s
Initializing phone hardware...
Flash manufacturer: Intel
Flash ID: 0x890D
The connected phone is a prototype!
OTP CID: 36
Phone hardware initialized OK
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 36
Primary certificate color: Red
Reading secondary certificate...
Secondary certificate CID: 36
Secondary certificate color: Brown
OSE configuration found.
Analysing GDFS...
Done.
Analyzing RSA protection...
RSA protection is normal.
Use the Unlock RSA function first!
Restarting phone...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 115200Bd
Sending applet...

Error uploading applet (3 %)

Lead · 07-08-2005, 16:51

@MG77: Your phone is a prototype. It will be fixed in the following release.

MG77 · 07-08-2005, 19:05

Ok, good to hear. I guess two days from now

CPUKILLER · 07-08-2005, 21:39

Quote:

Originally Posted by Lead

@MG77: Your phone is a prototype. It will be fixed in the following release.

hello mr lead ive bought cruiser (pro 2 ) ,3 days ago (1)how to activate imei changing on cruiser or how to change imei on phones and also tell me (2)how to check for original cruiser because my cruiser dongle bears mark ( i phone) on it and has an opening at 1 side like something is missing and reseller is not that a capable person regarding installation guidelines i had to download every thing from support area ofcourse through password from a helpfull forum member an do tell me is it necessary to register the box and can i use my dongle on different pcs or laptops please answer my every question at the earliest ---thanks

gwaai · 07-08-2005, 22:14

Quote:

Originally Posted by CPUKILLER

hello mr lead ive bought cruiser (pro 2 ) ,3 days ago (1)how to activate imei changing on cruiser or how to change imei on phones and also tell me (2)how to check for original cruiser because my cruiser dongle bears mark ( i phone) on it and has an opening at 1 side like something is missing and reseller is not that a capable person regarding installation guidelines i had to download every thing from support area ofcourse through password from a helpfull forum member an do tell me is it necessary to register the box and can i use my dongle on different pcs or laptops please answer my every question at the earliest ---thanks

1) IMEI change is disabled on new SE phones
2) yours is real, don't worry
3) most of the CRUISER is activated before you receive it, just installed cruiser program on another PC and use it ~ make sure the DATE is correct on your PCs

07-07-2005, 12:42	#1 (permalink)
roniri No Life Poster Join Date: Sep 2001 Location: Hungary, Pécs Age: 48 Posts: 1,240 Member: 6142 Status: Offline Sonork: i dont use it Thanks Meter: 47	Cant unlock RSA on K750 Hi! I want to decustom k750, flashing arm and rawFS were successfull, but when i try to unlock RSA i got always this: Ready! Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 36 Phone color: Brown Trying Brown CID36 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 2s Initializing phone hardware... Flash manufacturer: STmicro Flash ID: 0x200D OTP CID: 36 Phone hardware initialized OK Analyzing configuration... Reading primary certificate... Primary certificate CID: 36 Primary certificate color: Brown Reading secondary certificate... Secondary certificate CID: 36 Secondary certificate color: Brown OSE configuration found. Analysing GDFS... Done. Analyzing RSA protection... RSA protection is normal. Use the Unlock RSA function first! Restarting phone... Defeating RSA protection... Waiting for the phone to turn off... Should the communication hang, reinsert battery. Baudrate = 460800Bd Sending applet... Error uploading applet I dont know, what is the problem, the cable is sure good , because flashing run good , so i need your help! Regards Roniri

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Help] w800i, cant unlock rsa n cant customize fs	esbatu	Cruiser Suite	3	04-07-2008 14:30
Iphone 1.0.2 Cant unlock "firmware on this phone is already patched"	dannyogolo	iPhone 2 / iPhone 3G / iPhone 3GS	0	12-13-2007 10:40
Cannot Unlock Rsa On Db2020!!! Wtf?!	traian1	Cruiser Suite	7	09-07-2007 09:58
Unlock RSA on Motorola V3x To make you Upload All application !!!	Dengel	Motorola P2k	1	08-24-2007 01:43
P900 cant unlock RSA	seanhong	Cruiser Suite	2	01-20-2005 12:38

07-07-2005, 12:51	#2 (permalink)
ktalangsm Freak Poster Join Date: Jul 2000 Location: UC-10 Age: 46 Posts: 161 Member: 1664 Status: Offline Thanks Meter: 0	I think is this: Flash manufacturer: STmicro but not sure at 100%, u triying this in w2000 or Xp... In w2000, have the same problem in some units, so in Xp problem solved.....

07-07-2005, 12:58	#3 (permalink)
roniri No Life Poster Join Date: Sep 2001 Location: Hungary, Pécs Age: 48 Posts: 1,240 Member: 6142 Status: Offline Sonork: i dont use it Thanks Meter: 47	Im using windows Xp!

07-07-2005, 21:34	#4 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	Convert the phone to RED and then unlock RSA. It is a bug.

07-07-2005, 21:35	#5 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	Btw, you don't have to reflash the whole firmware after converting K750/W800 (EROM based phones) to red.

07-08-2005, 12:00	#6 (permalink)
MG77 No Life Poster Join Date: Jul 2004 Posts: 1,191 Member: 72567 Status: Offline Thanks Meter: 8	Connecting via UC-10 Universal Cable... Power on the phone, please! Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 115200Bd Sony Ericsson phone detected. Phone CID: 36 Phone color: Red Trying Red CID36 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 6s Initializing phone hardware... Flash manufacturer: Intel Flash ID: 0x890D The connected phone is a prototype! OTP CID: 36 Phone hardware initialized OK Analyzing configuration... Reading primary certificate... Primary certificate CID: 36 Primary certificate color: Red Reading secondary certificate... Secondary certificate CID: 36 Secondary certificate color: Brown OSE configuration found. Analysing GDFS... Done. Analyzing RSA protection... RSA protection is normal. Use the Unlock RSA function first! Restarting phone... Defeating RSA protection... Waiting for the phone to turn off... Should the communication hang, reinsert battery. Baudrate = 115200Bd Sending applet... Error uploading applet (3 %)

07-08-2005, 16:51	#7 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	@MG77: Your phone is a prototype. It will be fixed in the following release.

07-08-2005, 19:05	#8 (permalink)
MG77 No Life Poster Join Date: Jul 2004 Posts: 1,191 Member: 72567 Status: Offline Thanks Meter: 8	Ok, good to hear. I guess two days from now