Cruiser 5.02 Error - GSM-Forum

kiwiboi · 09-04-2005, 22:49

Hi Cruiser Team. I just want to ask you guys again about this problem i encountered on all SE phones i flashed, my Cruiser worked well on 4.30 till i upgraded to 5.0 then 5.01 and now 5.02. I reinstalled everything, but still get the error message below. Any help? Appreciate it...

GDFS Error: The specified module could not be found

And i can't go back to 4.30, you all know why...

kiwiboi · 09-05-2005, 01:58

Cruiser hasn't been stable since the upgrade from 4.30. I really need Cruiser to run smoothly the soonest time. Any help would be appreciated. Thanks!

muppet · 09-05-2005, 02:48

And when do you get that error?

As far as I'm aware, that's a problem with the phone.

What other stability problems have you had with Cruiser since v5? I've been using it without problem.

kiwiboi · 09-05-2005, 02:51

Thanks for the reply buddy. I flashed the phone perfectly but when i Customized FS that's where i get these error message. I'm using fully charged batt all the time. Am i missing something?

muppet · 09-05-2005, 02:59

You have a phone with a damaged GDFS I think.
At the moment I think you can format GDFS then write a raw GDFS from the support area.

You mention stability problems, what other problems have you had with Cruiser?

@tru`m · 09-05-2005, 03:53

Me too problem with P910, I can't SERCURITY ZONE, flashing..........fail
I was comeback ver 4.30 (Edit date before 29/8) Now, sucsessfully 100%
@Cruiser_Team
Fix bug it, Please.

kiwiboi · 09-05-2005, 04:29

Quote:

Originally Posted by muppet

You have a phone with a damaged GDFS I think.
At the moment I think you can format GDFS then write a raw GDFS from the support area.

You mention stability problems, what other problems have you had with Cruiser?

OK i'll try that. I hope it works (fingers crossed). But it doesn't really makes sense to me mate, coz i used a brand new phone and another good one, i have tried it on 3 phones, same errors. Tried to remove all the drivers and the Cruiser itself and installed/configured everything. But anyway, i'll give it a try, my customer's are jumping up and down

Thanks for the quick reply.

muppet · 09-05-2005, 04:45

What sort of phones?

I've unlocked/decustoised a large number over the last few days and have had no problems.

Paste here a log or a screenshot of the error.

kiwiboi · 09-05-2005, 06:40

Version 5.02 ready!
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8000
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 29
Phone color: Red
Trying Red CID29 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 29
Phone hardware initialized OK
Analyzing RSA protection...
RSA protection is weak.
RSA protection weakness type: PERMANENT
Flash file: "K700_CXC125821_EU1_R2AE033_Red29.ck7sw"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
Programming flash...
Time: 00:03:55
Flash process done.
Flash file: "K700_CXC125822_EU1_R2AE033_Red29.ck7fs"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:01:41
Flash process done.
Baudrate = 460800Bd
Defeating RSA protection...
Sending applet...
Defeated!
Sending CS applet...
Initializing CS applet...
Baudrate = 921600Bd
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...

---------

It stopped there and gave the error message below:

GDFS Error: The specified module could not be found

---------

I formatted the GDFS, written the GDFS which i got from the support area.

falak · 09-05-2005, 07:28

i m also using latest ver without ant problm.i thing this is not cruiser problm.

ber747 · 09-05-2005, 07:42

I tested version 5.02 and i found no problem on it. Tested on 2 k500i that was corrupted imei and no signal. Works for me except on p900
Sending flash applet...
Baudrate = 921600Bd
Programming flash...
Time: 00:01:05
Flash process done.
Turning off phone...
Phone turned off.
Phone automatically detached.
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Time spent entering bootstrap: 0s
Phone hardware initialized OK
Flash file: "P900_Symbian_CXC162021_R1B01.PDA.flp"
Waiting for flash file to load...
Sending PDA access applet...

Maybe its hardware problem but i don't know exactly the particular parts to be replace.

CPUKILLER · 09-06-2005, 04:50

Quote:

Originally Posted by kiwiboi

Version 5.02 ready!
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8000
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 29
Phone color: Red
Trying Red CID29 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 29
Phone hardware initialized OK
Analyzing RSA protection...
RSA protection is weak.
RSA protection weakness type: PERMANENT
Flash file: "K700_CXC125821_EU1_R2AE033_Red29.ck7sw"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
Programming flash...
Time: 00:03:55
Flash process done.
Flash file: "K700_CXC125822_EU1_R2AE033_Red29.ck7fs"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:01:41
Flash process done.
Baudrate = 460800Bd
Defeating RSA protection...
Sending applet...
Defeated!
Sending CS applet...
Initializing CS applet...
Baudrate = 921600Bd
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...

---------

It stopped there and gave the error message below:

GDFS Error: The specified module could not be found

---------

I formatted the GDFS, written the GDFS which i got from the support area.

ITS error on ports or while writing gdfs or while customizing phones i tried on other pc worked fine ,some more things also help dont use hubs,always tick full options ticked while installing the new installer and make sure dongle and usb cable are out of ports while installation and reboot yor pc all will be ok if this doesnt help then do certificate repair and all the full flash procedure again it surely works

kiwiboi · 09-06-2005, 05:32

Oh sorry guys, i forgot to update you of what happened. i managed to fix it by using another pc. worked well. bugger! it gave me some nightmares last night hehehe!

thanks for the replies everyone.

09-04-2005, 22:49	#1 (permalink)
kiwiboi Freak Poster Join Date: Feb 2005 Location: Auckland, NZ Age: 49 Posts: 301 Member: 114797 Status: Offline Thanks Meter: 23	Cruiser 5.02 Error Hi Cruiser Team. I just want to ask you guys again about this problem i encountered on all SE phones i flashed, my Cruiser worked well on 4.30 till i upgraded to 5.0 then 5.01 and now 5.02. I reinstalled everything, but still get the error message below. Any help? Appreciate it... GDFS Error: The specified module could not be found And i can't go back to 4.30, you all know why... Last edited by kiwiboi; 09-05-2005 at 02:16. Reason: Need to add more info

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cruiser 13.02 Error??????????????????	lahoot	Cruiser Suite	4	03-31-2008 21:20
Huh... Cruiser 5.02 time limit expired?	debeliamark	Cruiser Suite	12	10-20-2005 15:13
T290i Script error: Flash error [5.02.43] help!	Sakura	Cruiser Suite	2	09-30-2005 12:53
K700 booting error - [5.02.111]	rjsoo7	Cruiser Suite	3	09-25-2005 12:37
Cruiser 5.02 what news !!!!!	MicrostarGSM®	Cruiser Suite	15	09-04-2005 00:12

09-05-2005, 01:58	#2 (permalink)
kiwiboi Freak Poster Join Date: Feb 2005 Location: Auckland, NZ Age: 49 Posts: 301 Member: 114797 Status: Offline Thanks Meter: 23	Cruiser hasn't been stable since the upgrade from 4.30. I really need Cruiser to run smoothly the soonest time. Any help would be appreciated. Thanks!

09-05-2005, 02:48	#3 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	And when do you get that error? As far as I'm aware, that's a problem with the phone. What other stability problems have you had with Cruiser since v5? I've been using it without problem.

09-05-2005, 02:51	#4 (permalink)
kiwiboi Freak Poster Join Date: Feb 2005 Location: Auckland, NZ Age: 49 Posts: 301 Member: 114797 Status: Offline Thanks Meter: 23	Thanks for the reply buddy. I flashed the phone perfectly but when i Customized FS that's where i get these error message. I'm using fully charged batt all the time. Am i missing something?

09-05-2005, 02:59	#5 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	You have a phone with a damaged GDFS I think. At the moment I think you can format GDFS then write a raw GDFS from the support area. You mention stability problems, what other problems have you had with Cruiser?

09-05-2005, 03:53	#6 (permalink)
@tru`m Insane Poster Join Date: Sep 2004 Age: 56 Posts: 80 Member: 81016 Status: Offline Thanks Meter: 34	Me too problem with P910, I can't SERCURITY ZONE, flashing..........fail I was comeback ver 4.30 (Edit date before 29/8) Now, sucsessfully 100% @Cruiser_Team Fix bug it, Please.

09-05-2005, 04:45	#8 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	What sort of phones? I've unlocked/decustoised a large number over the last few days and have had no problems. Paste here a log or a screenshot of the error.

09-05-2005, 06:40	#9 (permalink)
kiwiboi Freak Poster Join Date: Feb 2005 Location: Auckland, NZ Age: 49 Posts: 301 Member: 114797 Status: Offline Thanks Meter: 23	Version 5.02 ready! Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x8000 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 29 Phone color: Red Trying Red CID29 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 2s Initializing phone hardware... Flash manufacturer: Intel Flash ID: 0x890D OTP Security Level: 1 (Retail) OTP CID: 29 Phone hardware initialized OK Analyzing RSA protection... RSA protection is weak. RSA protection weakness type: PERMANENT Flash file: "K700_CXC125821_EU1_R2AE033_Red29.ck7sw" Waiting for flash file to load... Preparing to program flash... Baudrate = 921600Bd Programming flash... Time: 00:03:55 Flash process done. Flash file: "K700_CXC125822_EU1_R2AE033_Red29.ck7fs" Waiting for flash file to load... Preparing to program flash... Programming flash... Time: 00:01:41 Flash process done. Baudrate = 460800Bd Defeating RSA protection... Sending applet... Defeated! Sending CS applet... Initializing CS applet... Baudrate = 921600Bd Starting up GDFS service... Starting up filesystem, please wait... Building customization... --------- It stopped there and gave the error message below: GDFS Error: The specified module could not be found --------- I formatted the GDFS, written the GDFS which i got from the support area.

09-05-2005, 07:28	#10 (permalink)
falak No Life Poster Join Date: Jul 2004 Location: IN YOUR DREAMS Age: 41 Posts: 2,462 Member: 74749 Status: Offline Thanks Meter: 167	i m also using latest ver without ant problm.i thing this is not cruiser problm.

09-05-2005, 07:42	#11 (permalink)
ber747 Freak Poster Join Date: Nov 2004 Location: philippines Posts: 277 Member: 93544 Status: Offline Thanks Meter: 1	I tested version 5.02 and i found no problem on it. Tested on 2 k500i that was corrupted imei and no signal. Works for me except on p900 Sending flash applet... Baudrate = 921600Bd Programming flash... Time: 00:01:05 Flash process done. Turning off phone... Phone turned off. Phone automatically detached. Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x5B08 Protocol version: 2.1 Time spent entering bootstrap: 0s Phone hardware initialized OK Flash file: "P900_Symbian_CXC162021_R1B01.PDA.flp" Waiting for flash file to load... Sending PDA access applet... Maybe its hardware problem but i don't know exactly the particular parts to be replace.

09-06-2005, 05:32	#13 (permalink)
kiwiboi Freak Poster Join Date: Feb 2005 Location: Auckland, NZ Age: 49 Posts: 301 Member: 114797 Status: Offline Thanks Meter: 23	Oh sorry guys, i forgot to update you of what happened. i managed to fix it by using another pc. worked well. bugger! it gave me some nightmares last night hehehe! thanks for the replies everyone.