cruiser Team - GSM-Forum

maxwell owusu · 03-19-2008, 10:27

Hello Cruiser Team, I bought cruiser and wont to activate it. I have sent the necessary information eg. card ID and my e-mail address to [email protected] but no reply. Please activate my card and reply me. my e-mail :[email protected]

Mainboard · 03-19-2008, 11:01

Cruiser doesn't need any activation. You can use it right after you bought it. If you want make operations require logs, you need buy logs, but there is no activation.

maxwell owusu · 03-19-2008, 16:34

In this case, if I don't have logs I cant unlock db2020 eg. K800i etc. or I can ? but in cruiser help menu, it says DB2020 SE phones are free to unlock if the check box of that option is checked in the settings. That is done but the unlock section is not enabled for DB2020 phones for unlocking. what should I do to enable the unlock option so to unlock DB2020 phones. Thank you.

My cruiser is cruiser Pro.

hemantgiet · 03-19-2008, 16:43

u can unlock db2020 cid52 for free with cruiser.First u have to check the cid,if it is 52 then it is ok and if it is not then u hav to convert it to cid 52 first with setool light or seflasher.then follow the patch unlock procedure in cruiserlogs guide site for db 2020.

fata24 · 03-19-2008, 17:29

Quote:

Originally Posted by hemantgiet

u can unlock db2020 cid52 for free with cruiser.First u have to check the cid,if it is 52 then it is ok and if it is not then u hav to convert it to cid 52 first with setool light or seflasher.then follow the patch unlock procedure in cruiserlogs guide site for db 2020.

u can change the cid with cruiser
and don't forget tick on (db2020 red cid 52 free unlock ) on the setting of the programe

maxwell owusu · 03-19-2008, 18:02

I have done all what you asked me but the unlock is not active. I WONT TO KNOW IF DB2020 52 CAN BE UNLOCKED STAND ALONE OR I NEED SOME CREDIT BEFORE BUT THE CREDIT WILL NOT BE DEDUCTED.

cannot even customize the phone DB2020 after flashing.

maxwell owusu · 03-19-2008, 18:08

if I try to convert cid49 to 52, this is the error :

[ --- Modify GDFS --- ]
Sending CS applet...
Applet ID: 060922 1436 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Applet ID: 060922 1436 HANCXC1250562_DB2020_CS...
Baudrate = 921600Bd
Starting up GDFS service...
Connecting to server...
Connection established, checking server status...
Server version: 2.35
Generating witness...
Your ID: user_******x
Time: 00:00:12
Server error: Unknown error code (0x0304, 0x0000)
Witness generation failure.
Could not unlock CS applet...
Error: Could not initialize GDFS access.

FilipLudvik · 03-19-2008, 23:00

Did you use a DCU-60 cable?

maxwell owusu · 03-20-2008, 11:26

Quote:

Originally Posted by FilipLudvik

Did you use a DCU-60 cable?

yes I used DCu-60 it did not work and I tried cruiser cable too it did not work.

magixian · 03-27-2008, 00:42

Quote:

Originally Posted by maxwell owusu

if I try to convert cid49 to 52, this is the error :

[ --- Modify GDFS --- ]
Sending CS applet...
Applet ID: 060922 1436 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Applet ID: 060922 1436 HANCXC1250562_DB2020_CS...
Baudrate = 921600Bd
Starting up GDFS service...
Connecting to server...
Connection established, checking server status...
Server version: 2.35
Generating witness...
Your ID: user_******x
Time: 00:00:12
Server error: Unknown error code (0x0304, 0x0000)
Witness generation failure.
Could not unlock CS applet...
Error: Could not initialize GDFS access.

CONTACT ME BY SMS, 08023786480

SendyBoy · 04-05-2008, 20:44

I have same problem
Server error: Unknown error code (0x0304, 0x0000)
Witness generation failure.
Could not unlock CS applet...
Error: Could not initialize GDFS access.

SendyBoy · 04-05-2008, 20:46

I use DCU-60 cable

neville_moffatt · 05-27-2008, 17:36

same problem with unlocking k610i need help please

bukitmascell · 05-28-2008, 11:17

i have cruiser 06 id, and have been bought log, but , why "dirict unloc" "unlock rsa" can't used (bleary)althought has coonect to server, with dcu60 cable.... i want to unlock k790, tx...

FilipLudvik · 05-30-2008, 01:26

Quote:

Originally Posted by bukitmascell

i have cruiser 06 id, and have been bought log, but , why "dirict unloc" "unlock rsa" can't used (bleary)althought has coonect to server, with dcu60 cable.... i want to unlock k790, tx...

because ID06 is NOT LONG TIME SUPPORTED...

how long have you been sleeping?

03-19-2008, 10:27	#1 (permalink)
maxwell owusu Major Poster Join Date: May 2006 Posts: 49 Member: 272683 Status: Offline Thanks Meter: 0	cruiser Team Hello Cruiser Team, I bought cruiser and wont to activate it. I have sent the necessary information eg. card ID and my e-mail address to [email protected] but no reply. Please activate my card and reply me. my e-mail :[email protected]

03-19-2008, 11:01	#2 (permalink)
Mainboard No Life Poster Join Date: Mar 2008 Posts: 3,995 Member: 25671 Status: Offline Thanks Meter: 719	Cruiser doesn't need any activation. You can use it right after you bought it. If you want make operations require logs, you need buy logs, but there is no activation. Last edited by Mainboard; 03-19-2008 at 11:09.

04-05-2008, 20:44	#11 (permalink)
SendyBoy Major Poster Join Date: Jan 2005 Location: Romania Age: 44 Posts: 43 Member: 105556 Status: Offline Thanks Meter: 0	Server error: Unknown error code (0x0304, 0x0000) I have same problem Server error: Unknown error code (0x0304, 0x0000) Witness generation failure. Could not unlock CS applet... Error: Could not initialize GDFS access.

04-05-2008, 20:46	#12 (permalink)
SendyBoy Major Poster Join Date: Jan 2005 Location: Romania Age: 44 Posts: 43 Member: 105556 Status: Offline Thanks Meter: 0	Help me I use DCU-60 cable

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-19-2008, 16:34	#3 (permalink)
maxwell owusu Major Poster Join Date: May 2006 Posts: 49 Member: 272683 Status: Offline Thanks Meter: 0	In this case, if I don't have logs I cant unlock db2020 eg. K800i etc. or I can ? but in cruiser help menu, it says DB2020 SE phones are free to unlock if the check box of that option is checked in the settings. That is done but the unlock section is not enabled for DB2020 phones for unlocking. what should I do to enable the unlock option so to unlock DB2020 phones. Thank you. My cruiser is cruiser Pro.

03-19-2008, 16:43	#4 (permalink)
hemantgiet Junior Member Join Date: Aug 2007 Posts: 11 Member: 571797 Status: Offline Thanks Meter: 0	u can unlock db2020 cid52 for free with cruiser.First u have to check the cid,if it is 52 then it is ok and if it is not then u hav to convert it to cid 52 first with setool light or seflasher.then follow the patch unlock procedure in cruiserlogs guide site for db 2020.

03-19-2008, 18:02	#6 (permalink)
maxwell owusu Major Poster Join Date: May 2006 Posts: 49 Member: 272683 Status: Offline Thanks Meter: 0	I have done all what you asked me but the unlock is not active. I WONT TO KNOW IF DB2020 52 CAN BE UNLOCKED STAND ALONE OR I NEED SOME CREDIT BEFORE BUT THE CREDIT WILL NOT BE DEDUCTED. cannot even customize the phone DB2020 after flashing.

03-19-2008, 18:08	#7 (permalink)
maxwell owusu Major Poster Join Date: May 2006 Posts: 49 Member: 272683 Status: Offline Thanks Meter: 0	if I try to convert cid49 to 52, this is the error : [ --- Modify GDFS --- ] Sending CS applet... Applet ID: 060922 1436 HANCXC1250562_DB2020_CS... Initializing CS applet... Applet ID: 060922 1436 HANCXC1250562_DB2020_CS... Baudrate = 921600Bd Starting up GDFS service... Connecting to server... Connection established, checking server status... Server version: 2.35 Generating witness... Your ID: user_******x Time: 00:00:12 Server error: Unknown error code (0x0304, 0x0000) Witness generation failure. Could not unlock CS applet... Error: Could not initialize GDFS access.

03-19-2008, 23:00	#8 (permalink)
FilipLudvik No Life Poster Join Date: Apr 2005 Location: between New Zealand - Canada Age: 42 Posts: 2,514 Member: 135110 Status: Offline Thanks Meter: 302	Did you use a DCU-60 cable?

05-27-2008, 17:36	#13 (permalink)
neville_moffatt Junior Member Join Date: Mar 2005 Age: 45 Posts: 31 Member: 128785 Status: Offline Thanks Meter: 2	same problem with unlocking k610i need help please

05-28-2008, 11:17	#14 (permalink)
bukitmascell Insane Poster Join Date: Mar 2007 Posts: 71 Member: 469296 Status: Offline Thanks Meter: 12	i have cruiser 06 id, and have been bought log, but , why "dirict unloc" "unlock rsa" can't used (bleary)althought has coonect to server, with dcu60 cable.... i want to unlock k790, tx...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
To Cruiser Team, Help With My Cruiser Box	ASHRIFF	Cruiser Suite	12	03-16-2011 21:24
Cruiser Team w810i waiting for aknowledge in cruiser any solution	Victor the	Cruiser Suite	5	02-15-2007 10:18
To cruiser team problem with my cruiser pro2	ami236	Cruiser Suite	10	10-27-2006 20:46
cruiser team where are you very very bed service from cruiser team	nio	Cruiser Suite	10	06-09-2006 05:24
cruiser team or dead cruiser team	cs55	Cruiser Suite	8	10-13-2005 10:02