Db2020 Unlocking Steps Look here and Dont ask agian - GSM-Forum

irfan99 · 06-29-2007, 15:37

Every body is comlaining that cruiser readed wrong codes and did'nt Unlocked The phone U have to Do these Step

1st Backup security and GDFS with cruiser free software which is present in support area

Use DC60 cable For Unlocking DB2020 Phones

2 Tun off the phone and press C button and put cable into phone system will ask for drivers install drivers from Cruiser Folder After that deattach the phone

3 Then click on Attach phone in cruiser USB and Press C button on phone and insert cable

4 Then go to security tabe of Cruiser and click on UNlock RSA

5 AFter that Restore firmware or flash Main with any file

6 After successful restoral or flashing dont flash raw

7 Dont deattach the phone and click on REAd codes If it dont work then click on Direct unlock

and remember direct unlock is just like setool3 patch unlocking and read codes is from cruiser team but didn't worked

J-lock · 06-29-2007, 15:51

Thanks for good Advice

u must be proud ....

HAROON's · 06-29-2007, 16:01

100% sure i will not ask again

any way thanks for help

br
gsmcrazy1

irishclips · 06-29-2007, 16:41

Quote:

Originally Posted by irfan99

Every body is comlaining that cruiser readed wrong codes and did'nt Unlocked The phone U have to Do these Step

1St of ALL use DC60 cable For Unlocking DB2020 Phones

2 Tun off the phone and press C button and put cable into phone system will ask for drivers install drivers from Cruiser Folder After that deattach the phone

3 Then click on Attach phone in cruiser USB and Press C button on phone and insert cable

4 Then go to security tabe of Cruiser and click on UNlock RSA

5 AFter that Restore firmware or flash Main with any file

6 After successful restoral or flashing dont flash raw

7 Dont deattach the phone and click on REAd codes If it dont work then click on Direct unlock

and remember direct unlock is just like setool3 patch unlocking and read codes is from cruiser team but didn't worked

Can I just change the above slightly?

After you attach the phone, always repair EROM if it is low version 11 etc
Also, you did not say to detach phone when finished. I have seen some posts here where they removed the phone without detach first.

1. Attach phone
2. Repair EROM (if needed)
3. Reattach phone and Unlock RSA
4. Restore firmware (or flash with full ARM if restore does not suit the firmware version - also, use FS if ARM is not same as original file)
5. Read codes/direct unlock
6. Detach phone/shutdown FS

brussl · 06-29-2007, 17:04

And if need flash new ver. this is without FS customazing IRISHCLIPS?

irishclips · 06-29-2007, 18:04

If you need to flash new version, then flash arm AND fs files
Then customize FS

***THE CLASH*** · 06-29-2007, 19:37

Yea and what about backing up security and GDFS, it only takes a minute and will save you a lot off hassel if there is problems.

**koksi** · 06-29-2007, 20:35

how to flash and unlock with 1 credit german tutorial

www.koksi.at (direct video)

MDK23 · 06-29-2007, 20:39

Big Thank To All it's Good Work

FU_Too · 06-29-2007, 21:14

Quote:

Originally Posted by irishclips

Can I just change the above slightly?

After you attach the phone, always repair EROM if it is low version 11 etc
Also, you did not say to detach phone when finished. I have seen some posts here where they removed the phone without detach first.

1. Attach phone
2. Repair EROM (if needed)
3. Reattach phone and Unlock RSA
4. Restore firmware (or flash with full ARM if restore does not suit the firmware version - also, use FS if ARM is not same as original file)
5. Read codes/direct unlock
6. Detach phone/shutdown FS

Thanks for this procedure, Ive been putting off using Cruiser for unlock but following this it went like a dream. (Ive printed off and put in my instruction book)

irishclips · 06-29-2007, 21:33

No problem at all

Just did a V630i about 30 mins ago and no problem again

System diagnostics passed.
Version 11.05 ready!
Do NOT connect the phone at this time!

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via EROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
EROM version: R3A016
Trying CID49 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060712 1258 ALU4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone CID: 49
Phone color: Red
Sending applet...
Applet ID: 060721 1022 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Sending CS applet...
Applet ID: 060922 1436 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Connecting to server...
Connection established, checking server status...
Server version: 2.08
Generating witness...
Your ID: xxxxxxxx
Number of preceding users: 0
Credit: 7
Received successfully.
Calculating unlock data...
Received successfully.
Time: 00:00:04
Defeating RSA protection...
Restarting phone...
Connect the phone while holding its C button!
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 070516 0311 CRU4_CXC1329130_DB2020_...
Sending applet...
Applet ID: 070516 0201 CRUCXC1329134_DB2020_PR...
Done.

[ --- Restore Firmware --- ]
Identifying firmware...
Firmware ID: prgCXC1250556_VODAFONE_MW
Firmware version: R1ED001
Searching for FW restoral file...
File name: R1ED001_CXC1250556_VODAFONE_MW.pfb
FW restoral file found.
Preparing to program flash...
Programming flash...
Time: 00:00:06
Flash process done.

[ --- Direct Unlock --- ]
Analyzing firmware...
Preparing for direct unlock...
Processing...
Status: Success [O]
Creating firmware backup file...
Preparing to program flash...
Programming flash...
Time: 00:00:02
Flash process done.
If the phone cannot be turned on anymore, report its type and firmware version.
Starting up GDFS service...
Unlocking phone...
Recalculating CRCs...
Done.

[ --- Shutdown File System --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.

UnlockBR · 06-29-2007, 22:00

Hummm... anuone succeeded reading codes? I mean correct codes?

..::Sunil::.. · 06-30-2007, 06:40

Thanks for sharing steps....

B.r.
Sunil.

irfan99 · 06-30-2007, 20:47

Mr UnlockBR when cruiser released v11 i tried unlocking via codes phone unlocked with codes but after changing sim phone red blink it was k800i and i am still waiting for solution of red blink phones after entering codes

and after that i did'nt tryed read codes unlocking becoz i lost my 1 phone through this way if some 1 sucessed please post here

UnlockBR · 07-01-2007, 00:09

That's why I asked that... I really want to check someone that succeded b4 buying credits...

06-29-2007, 15:37	#1 (permalink)
irfan99 No Life Poster Join Date: Mar 2006 Location: Pakistan Peshawar Age: 35 Posts: 1,170 Member: 242264 Status: Offline Sonork: 100.1582011 Thanks Meter: 33	Db2020 Unlocking Steps Look here and Dont ask agian Every body is comlaining that cruiser readed wrong codes and did'nt Unlocked The phone U have to Do these Step 1st Backup security and GDFS with cruiser free software which is present in support area Use DC60 cable For Unlocking DB2020 Phones 2 Tun off the phone and press C button and put cable into phone system will ask for drivers install drivers from Cruiser Folder After that deattach the phone 3 Then click on Attach phone in cruiser USB and Press C button on phone and insert cable 4 Then go to security tabe of Cruiser and click on UNlock RSA 5 AFter that Restore firmware or flash Main with any file 6 After successful restoral or flashing dont flash raw 7 Dont deattach the phone and click on REAd codes If it dont work then click on Direct unlock and remember direct unlock is just like setool3 patch unlocking and read codes is from cruiser team but didn't worked Last edited by irfan99; 06-29-2007 at 19:41.

06-30-2007, 20:47	#14 (permalink)
irfan99 No Life Poster Join Date: Mar 2006 Location: Pakistan Peshawar Age: 35 Posts: 1,170 Member: 242264 Status: Offline Sonork: 100.1582011 Thanks Meter: 33	hi Mr UnlockBR when cruiser released v11 i tried unlocking via codes phone unlocked with codes but after changing sim phone red blink it was k800i and i am still waiting for solution of red blink phones after entering codes and after that i did'nt tryed read codes unlocking becoz i lost my 1 phone through this way if some 1 sucessed please post here

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z500a Unlocking error look here	MicrostarGSM®	Sonics Box	8	04-06-2010 21:50
ZV10 unlock Guide , look here	Bay	QUALCOMM Models (3G)	25	05-30-2009 16:32
DB2020 Unlocking starts in SETOOL and MT-BOX	nnaeem11	GOT SEMC	4	05-13-2007 09:04
look here wot is db2020 and y its hard to handle	falak	Cruiser Suite	8	08-23-2006 16:36
please mr lead look here and give me instruction what i do	saily	Cruiser Suite	1	02-22-2006 18:07

06-29-2007, 15:51	#2 (permalink)
J-lock No Life Poster Join Date: Sep 2003 Location: Melbourne , AUS Age: 47 Posts: 882 Member: 40451 Status: Offline Sonork: 100.1580450 Thanks Meter: 73	Thanks for good Advice u must be proud ....

06-29-2007, 16:01	#3 (permalink)
HAROON's No Life Poster Join Date: Dec 2004 Location: Manama / BAHRAIN Posts: 1,665 Member: 100592 Status: Offline Sonork: 1578498 Thanks Meter: 245	100% sure i will not ask again any way thanks for help br gsmcrazy1

06-29-2007, 17:04	#5 (permalink)
brussl Freak Poster Join Date: Jun 2001 Location: BULGARIA Posts: 325 Member: 4931 Status: Offline Thanks Meter: 1	And if need flash new ver. this is without FS customazing IRISHCLIPS?

06-29-2007, 18:04	#6 (permalink)
irishclips No Life Poster Join Date: Sep 2004 Location: www.thefonedoc.com Age: 55 Posts: 853 Member: 84155 Status: Offline Thanks Meter: 8	If you need to flash new version, then flash arm AND fs files Then customize FS

06-29-2007, 19:37	#7 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.... Age: 57 Posts: 6,030 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks Meter: 2,784	Yea and what about backing up security and GDFS, it only takes a minute and will save you a lot off hassel if there is problems.

06-29-2007, 20:35	#8 (permalink)
koksi Product Manager Join Date: Jan 2003 Posts: 411 Member: 19575 Status: Offline Thanks Meter: 134	how to flash and unlock with 1 credit german tutorial www.koksi.at (direct video)

06-29-2007, 20:39	#9 (permalink)
MDK23 No Life Poster Join Date: Mar 2007 Location: ALGERIA Age: 17 Posts: 3,165 Member: 467636 Status: Offline Sonork: Double Kanon Thanks Meter: 2,654	Big Thank To All it's Good Work

06-29-2007, 21:33	#11 (permalink)
irishclips No Life Poster Join Date: Sep 2004 Location: www.thefonedoc.com Age: 55 Posts: 853 Member: 84155 Status: Offline Thanks Meter: 8	No problem at all Just did a V630i about 30 mins ago and no problem again System diagnostics passed. Version 11.05 ready! Do NOT connect the phone at this time! [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x9900 Protocol version: 3.1 Booting via EROM... Sony Ericsson phone detected. Phone CID: 49 Phone color: Red EROM version: R3A016 Trying CID49 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060712 1258 ALU4_CXC1329130_DB2020_... Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Phone CID: 49 Phone color: Red Sending applet... Applet ID: 060721 1022 HANCXC1329129_DB2020_FL... RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Unlock RSA --- ] Sending CS applet... Applet ID: 060922 1436 HANCXC1250562_DB2020_CS... Initializing CS applet... Connecting to server... Connection established, checking server status... Server version: 2.08 Generating witness... Your ID: xxxxxxxx Number of preceding users: 0 Credit: 7 Received successfully. Calculating unlock data... Received successfully. Time: 00:00:04 Defeating RSA protection... Restarting phone... Connect the phone while holding its C button! Sending applet prologue... Sending applet body... Waiting for acknowledge... Applet ID: 070516 0311 CRU4_CXC1329130_DB2020_... Sending applet... Applet ID: 070516 0201 CRUCXC1329134_DB2020_PR... Done. [ --- Restore Firmware --- ] Identifying firmware... Firmware ID: prgCXC1250556_VODAFONE_MW Firmware version: R1ED001 Searching for FW restoral file... File name: R1ED001_CXC1250556_VODAFONE_MW.pfb FW restoral file found. Preparing to program flash... Programming flash... Time: 00:00:06 Flash process done. [ --- Direct Unlock --- ] Analyzing firmware... Preparing for direct unlock... Processing... Status: Success [O] Creating firmware backup file... Preparing to program flash... Programming flash... Time: 00:00:02 Flash process done. If the phone cannot be turned on anymore, report its type and firmware version. Starting up GDFS service... Unlocking phone... Recalculating CRCs... Done. [ --- Shutdown File System --- ] Turning off phone... Phone turned off. Phone automatically detached.

06-29-2007, 22:00	#12 (permalink)
UnlockBR No Life Poster Join Date: Apr 2003 Location: Sao Paulo - BRAZIL Age: 49 Posts: 1,512 Member: 26751 Status: Offline Thanks Meter: 2	Hummm... anuone succeeded reading codes? I mean correct codes?

06-30-2007, 06:40	#13 (permalink)
..::Sunil::.. Banned Join Date: Jan 2007 Location: India Age: 34 Posts: 2,705 Member: 432364 Status: Offline Thanks Meter: 270	Thanks for sharing steps.... B.r. Sunil.

07-01-2007, 00:09	#15 (permalink)
UnlockBR No Life Poster Join Date: Apr 2003 Location: Sao Paulo - BRAZIL Age: 49 Posts: 1,512 Member: 26751 Status: Offline Thanks Meter: 2	That's why I asked that... I really want to check someone that succeded b4 buying credits...