Enchanced cables easy guide ;) - GSM-Forum

Invisible · 11-02-2004, 11:20

hi,

HERE is easy guide to mod cable for enchanced operations,

best regards
Invisible

mancenance · 11-02-2004, 12:55

Thanks for the nice document.
*yuck.. it's messy inside, i didn't know that

isdnman · 11-02-2004, 13:04

thanks. The picstures would be much clearly if you use the camera at "flower mode"
Anyway. Great job. Keep it up.

GSM Coolhawk · 11-02-2004, 13:27

@Invisible

Nice mod, doing it right now

I had already changed the 74HC405 since my cable after nearly 1.5 years of hard work gave up the spirit hehe

Thanks for this mod

Regards

MadPhone · 11-02-2004, 14:22

Hi Invisible,

Great work, but is possible to get a better picture where to get the 3.3v? becouse i conect my cable to USB and with i multimeter i try to find the 3.3v near that zone you put in picture but im just having 5.5v...
near the small smd with reference "93c46" i have 3 resistors one with 222 and 2 with 270.
Thanks in advance.

Regards.

Invisible · 11-02-2004, 17:07

hi,

sure, I will scan pcb for better picture, anyway, all having problems findind 3,3v
just look at wires from usb connector, red cable is giving 3,3v

best regards
Invisible

Lead · 11-03-2004, 00:34

Quote:

Originally Posted by Invisible

hi,

sure, I will scan pcb for better picture, anyway, all having problems findind 3,3v
just look at wires from usb connector, red cable is giving 3,3v

best regards
Invisible

Red USB cable is giving 5.0V, but I hope it could be used too.

Lead · 11-03-2004, 00:49

Here is a picture showing UC-10 cable modification...

gbrooks3 · 11-03-2004, 02:26

Great stuff guys, it works great. By the way, can this be attempted with the dss-25 sync station now that fighter supports it? i think i will have a little play around.

Lead · 11-03-2004, 02:55

Quote:

Originally Posted by gbrooks3

Great stuff guys, it works great. By the way, can this be attempted with the dss-25 sync station now that fighter supports it? i think i will have a little play around.

It is not necessary to do it with DSS-25.

gbrooks3 · 11-03-2004, 02:59

really? the dss-25 can flash avr/arm/gdfs in any order?

Thanks lead, learn something new every day.

muppet · 11-03-2004, 03:45

When I was using a DSS-25 it seemed that all options in any order were available! I just assumed this might be a bug with the DSS code though, but obviously not!
Sorry for my lack of faith

gbrooks3 · 11-03-2004, 03:48

@muppet
have you tried the cable conversion? (just making conversion by the way, its 3am here and i have had a bit of a drink)

muppet · 11-03-2004, 03:52

Quote:

Originally Posted by gbrooks3

@muppet
have you tried the cable conversion? (just making conversion by the way, its 3am here and i have had a bit of a drink)

It's 3pm here and I'm about to go out for a few beers myself! It's a nice sunny afternoon in Auckland, just perfect for sitting outside having a beer watching the world go by!

I haven't done the conversion, no. I opened up my Fighter Cable today and looked at all the black goop in there and thought "this is just too hard"
I'm going to get myself a couple more DSS-25's and just use those I think, they're easy to use and have a nice flashy light as well!

@Invisible: Thanks for posting your howto.

gbrooks3 · 11-03-2004, 03:57

guess i was lucky, no black "gloop" on any of my cables???

11-02-2004, 11:20	#1 (permalink)
Invisible No Life Poster Join Date: Apr 2001 Location: รำมว&# Posts: 2,461 Member: 3956 Status: Offline Sonork: galletto3 rules :D Thanks Meter: 55	Enchanced cables easy guide ;) hi, HERE is easy guide to mod cable for enchanced operations, best regards Invisible

11-03-2004, 02:59	#11 (permalink)
gbrooks3 No Life Poster Join Date: Jul 2004 Location: 0xBA, 0xBE Age: 38 Posts: 690 Member: 73743 Status: Offline Thanks Meter: 2	really? the dss-25 can flash avr/arm/gdfs in any order? Thanks lead, learn something new every day. Last edited by gbrooks3; 11-03-2004 at 03:43.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
### Free HTC Touch Unlocking [easy guide] ###	Z-RocK	HTC & PDA WM( With Touchscreen)	19	08-05-2009 05:21
Easy Guide To Change Language For Nokia N95	saeedhex	Nokia Base Band 5 ( BB-5 )	5	10-11-2008 21:42
Easy guide to unlock GX29 by GsmHelp	..::GsmHelp::..	Sharp	7	09-03-2007 23:19
Easy Guide for SE Module	luskao	Astro Clip	0	12-04-2005 23:51
All siemens User Guides ;)	odiseus	Siemens Hardware Repair Area	1	10-14-2005 18:21

11-02-2004, 12:55	#2 (permalink)
mancenance Junior Member Join Date: Oct 2004 Age: 45 Posts: 37 Member: 88515 Status: Offline Thanks Meter: 0	Thanks for the nice document. *yuck.. it's messy inside, i didn't know that

11-02-2004, 13:04	#3 (permalink)
isdnman Freak Poster Join Date: Oct 2003 Location: Melbourne, Australia Posts: 263 Member: 41951 Status: Offline Thanks Meter: 3	thanks. The picstures would be much clearly if you use the camera at "flower mode" Anyway. Great job. Keep it up.

11-02-2004, 13:27	#4 (permalink)
GSM Coolhawk No Life Poster Join Date: Dec 2001 Location: United Arab Emirates, Dubai Age: 52 Posts: 1,269 Member: 7751 Status: Offline Thanks Meter: 74	@Invisible Nice mod, doing it right now I had already changed the 74HC405 since my cable after nearly 1.5 years of hard work gave up the spirit hehe Thanks for this mod Regards

11-02-2004, 14:22	#5 (permalink)
MadPhone No Life Poster Join Date: Nov 2001 Location: Underground Age: 43 Posts: 761 Member: 7468 Status: Offline Thanks Meter: 2	Hi Invisible, Great work, but is possible to get a better picture where to get the 3.3v? becouse i conect my cable to USB and with i multimeter i try to find the 3.3v near that zone you put in picture but im just having 5.5v... near the small smd with reference "93c46" i have 3 resistors one with 222 and 2 with 270. Thanks in advance. Regards.

11-02-2004, 17:07	#6 (permalink)
Invisible No Life Poster Join Date: Apr 2001 Location: รำมว&# Posts: 2,461 Member: 3956 Status: Offline Sonork: galletto3 rules :D Thanks Meter: 55	hi, sure, I will scan pcb for better picture, anyway, all having problems findind 3,3v just look at wires from usb connector, red cable is giving 3,3v best regards Invisible

11-03-2004, 02:26	#9 (permalink)
gbrooks3 No Life Poster Join Date: Jul 2004 Location: 0xBA, 0xBE Age: 38 Posts: 690 Member: 73743 Status: Offline Thanks Meter: 2	Great stuff guys, it works great. By the way, can this be attempted with the dss-25 sync station now that fighter supports it? i think i will have a little play around.

11-03-2004, 03:45	#12 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	When I was using a DSS-25 it seemed that all options in any order were available! I just assumed this might be a bug with the DSS code though, but obviously not! Sorry for my lack of faith

11-03-2004, 03:48	#13 (permalink)
gbrooks3 No Life Poster Join Date: Jul 2004 Location: 0xBA, 0xBE Age: 38 Posts: 690 Member: 73743 Status: Offline Thanks Meter: 2	@muppet have you tried the cable conversion? (just making conversion by the way, its 3am here and i have had a bit of a drink)

11-03-2004, 03:57	#15 (permalink)
gbrooks3 No Life Poster Join Date: Jul 2004 Location: 0xBA, 0xBE Age: 38 Posts: 690 Member: 73743 Status: Offline Thanks Meter: 2	guess i was lucky, no black "gloop" on any of my cables???