How to recover W810 - GSM-Forum

cgsm · 07-27-2006, 14:43

Pls solve my prob

i have one W810 which is dead by HWK
now i connect with Cruiser it shows
System diagnostics passed.
Version 9.74 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Phone color: None
Flash certificate: -
All threads terminated.

If i try to recover it shows like

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Trying CID49 recovery applet...
Sending applet prologue...
All threads terminated.

How to recover this phone in working condition

Crazy_ratata · 07-27-2006, 15:32

This indicates flat battery... Try a fully charged battery...

_mo_ · 08-21-2006, 10:44

Quote:

Originally Posted by Crazy_ratata

This indicates flat battery... Try a fully charged battery...

i got the same problem - i know my battery is fully charged. any idea's?
on cruiser:
System diagnostics passed.
Version 9.74 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Phone color: None
Flash certificate: -
All threads terminated.

when i connect phone on usb smart it comes up with:
Switch phone ON
ERROR: Certificate not find. Please use Recovery!

any suggestions?

RGUY · 08-21-2006, 12:56

Use recovery method to restore the certificate. Repair the cert. Attach phone in normal mode and you will have your cert back.

_mo_ · 08-21-2006, 13:13

Quote:

Originally Posted by RGUY

Use recovery method to restore the certificate. Repair the cert. Attach phone in normal mode and you will have your cert back.

can't even attach the phone - all i keep getting is all threads terminated.
its really frustrating lol

shakeelajmal · 08-21-2006, 13:32

try with setool if you have

2nd .. use tespoint method if cruiser support ,,
you said phone was working condition. then you got ur phone back alive

Good luck

Br

RGUY · 08-21-2006, 13:35

Did you select mode to recovery CID 49 before attaching phone?

_mo_ · 08-21-2006, 16:10

i don't have setool - i can try it via testpoint but just need the picture if anyone has this.

i did try it via recovery boot on cid49 but this terminated all threads aswell.

*phone-company* · 08-21-2006, 16:25

testpoint then eerom then flash full software

_mo_ · 08-22-2006, 10:25

can you please post testpoint picture for me?

many thanks
mo

Logitext · 08-22-2006, 14:14

hm...
maybe im wrong but cruiser dosent have tp support for
W810i because no need for it...

try connect with speed set to lowest and choose manually model

BR

_mo_ · 08-23-2006, 12:27

right - i have just tried at the lowest speed & manually selected handset but i am still getting the same problem. if anyone has had this problem in the past & managed to resolve it - your input would be greatly appreciated.

i look forward to your replies.

many thanks
mo

Crazy_ratata · 08-23-2006, 12:51

And you are 100% positive that the battery is working and is fully charged... You could instead of battery use 3.6 voltage external power supply...

_mo_ · 08-23-2006, 14:58

i'm already using a power supply - i know that the voltage is defo correct.

khan_world · 08-23-2006, 15:46

Quote:

Originally Posted by cgsm

Pls solve my prob

i have one W810 which is dead by HWK
now i connect with Cruiser it shows
System diagnostics passed.
Version 9.74 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Phone color: None
Flash certificate: -
All threads terminated.

If i try to recover it shows like

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Trying CID49 recovery applet...
Sending applet prologue...
All threads terminated.

How to recover this phone in working condition

i bet u need to do tespoint on it to alive da phone

07-27-2006, 14:43	#1 (permalink)
cgsm Freak Poster Join Date: Oct 2004 Age: 47 Posts: 380 Member: 88402 Status: Offline Thanks Meter: 489	How to recover W810 Pls solve my prob i have one W810 which is dead by HWK now i connect with Cruiser it shows System diagnostics passed. Version 9.74 ready! [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Phone color: None Flash certificate: - All threads terminated. If i try to recover it shows like [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Trying CID49 recovery applet... Sending applet prologue... All threads terminated. How to recover this phone in working condition

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K750 Brown Converted to Red, How to recover??	Mobilesunlocked	Cruiser Suite	6	11-14-2006 10:42
How To Recover DATA ,,, Partition Lost by Victor !!!!!!!! Need urgent Help :(	Aamir_Zia	Motorola P2k	18	10-30-2005 02:00
SE K300i CID 36 how to recover imei?	orks	Sony Ericsson	0	10-05-2005 13:07
How to recover blinking/dead z1010	mukka	TOTAL MultiServer	1	12-05-2004 00:51
how to recover phonecode on SL45? all 3 tries expired..	sat	x1x to x45/x50	5	01-11-2002 07:50

07-27-2006, 15:32	#2 (permalink)
Crazy_ratata No Life Poster Join Date: May 2005 Location: Denmark Age: 42 Posts: 1,399 Member: 146369 Status: Offline Thanks Meter: 119	This indicates flat battery... Try a fully charged battery...

08-21-2006, 12:56	#4 (permalink)
RGUY Freak Poster Join Date: May 2006 Posts: 173 Member: 277942 Status: Offline Thanks Meter: 0	Use recovery method to restore the certificate. Repair the cert. Attach phone in normal mode and you will have your cert back.

08-21-2006, 13:32	#6 (permalink)
shakeelajmal No Life Poster Join Date: Feb 2004 Location: PaKiStAn Age: 44 Posts: 1,865 Member: 51639 Status: Offline Thanks Meter: 76	try with setool if you have 2nd .. use tespoint method if cruiser support ,, you said phone was working condition. then you got ur phone back alive Good luck Br

08-21-2006, 13:35	#7 (permalink)
RGUY Freak Poster Join Date: May 2006 Posts: 173 Member: 277942 Status: Offline Thanks Meter: 0	Did you select mode to recovery CID 49 before attaching phone?

08-21-2006, 16:10	#8 (permalink)
_mo_ Freak Poster Join Date: May 2004 Location: UK Posts: 171 Member: 65097 Status: Offline Sonork: 100.111703 Thanks Meter: 7	i don't have setool - i can try it via testpoint but just need the picture if anyone has this. i did try it via recovery boot on cid49 but this terminated all threads aswell.

08-21-2006, 16:25	#9 (permalink)
phone-company No Life Poster Join Date: Mar 2004 Location: Nederlands / Germany / Danmark Age: 51 Posts: 2,461 Member: 60001 Status: Offline Sonork: 100.106474 Thanks Meter: 151	testpoint then eerom then flash full software

08-22-2006, 10:25	#10 (permalink)
_mo_ Freak Poster Join Date: May 2004 Location: UK Posts: 171 Member: 65097 Status: Offline Sonork: 100.111703 Thanks Meter: 7	can you please post testpoint picture for me? many thanks mo

08-22-2006, 14:14	#11 (permalink)
Logitext Freak Poster Join Date: Aug 2006 Location: Gsm..... Posts: 338 Member: 334860 Status: Offline Thanks Meter: 5	hm... maybe im wrong but cruiser dosent have tp support for W810i because no need for it... try connect with speed set to lowest and choose manually model BR

08-23-2006, 12:27	#12 (permalink)
_mo_ Freak Poster Join Date: May 2004 Location: UK Posts: 171 Member: 65097 Status: Offline Sonork: 100.111703 Thanks Meter: 7	right - i have just tried at the lowest speed & manually selected handset but i am still getting the same problem. if anyone has had this problem in the past & managed to resolve it - your input would be greatly appreciated. i look forward to your replies. many thanks mo

08-23-2006, 12:51	#13 (permalink)
Crazy_ratata No Life Poster Join Date: May 2005 Location: Denmark Age: 42 Posts: 1,399 Member: 146369 Status: Offline Thanks Meter: 119	And you are 100% positive that the battery is working and is fully charged... You could instead of battery use 3.6 voltage external power supply...

08-23-2006, 14:58	#14 (permalink)
_mo_ Freak Poster Join Date: May 2004 Location: UK Posts: 171 Member: 65097 Status: Offline Sonork: 100.111703 Thanks Meter: 7	i'm already using a power supply - i know that the voltage is defo correct.