How to reLive a dead K790 phone?
 

Hi L and supporters ,

I have Cruiser Version 12.02, 06 and credits.

Please can you help why I can't reLive this K790 dead according to the procedure:



Here is the log:

System diagnostics passed.
Version 12.02 ready!
Do NOT connect the phone at this time!
Connecting via SEMC DCU-60...
Connecting to server...
Connection established, checking server status...
Server version: 2.22
Retrieving credit info...
Your ID:
Credit: 6
Time: 00:00:01

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 0 (Developer)
OTP CID: 49
Phone CID: 49
Phone color: Red
Sending applet...
Applet ID: 060721 1022 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "K790a_CXC1250634_NAM1_R1EG001_Red49.ck79sw"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:03:49
Flash process done.

[ --- Flash Raw File System --- ]
Flash file: "K790a_CXC1250491_Rogers_R1EG001_Red49.ck79fs"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:01:21
Flash process done.

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 060922 1436 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Connecting to server...
Connection established, checking server status...
Server version: 2.22
Generating witness...
Your ID:
Number of preceding users: 0
Credit: 6
Received successfully.
Calculating unlock data...
Received successfully.
Time: 00:00:04
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102535/301
Done.
Writing CDA Version MS string...
New value: R8A
Done.
Writing Default Article MS string...
New value: cxc1250491
Done.
Writing Default Version MS string...
New value: R1EG001
Done.
Writing langpack string...
New value: AMERICA_1
Done.
Writing country...
New value: Generic Trade
Done.

[ --- Save Security Zone --- ]
Reading security zone...
Done.

[ --- Disable Camera Sound --- ]
Analyzing camera sounds...
Disabling camera sounds...
Done.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.
Connecting via SEMC DCU-60...
Connecting to server...
Connection established, checking server status...
Server version: 2.22
Retrieving credit info...
Your ID:
Credit: 5 (Because I customized)
Time: 00:00:01

But the phone is still dead...

Thanks in advanced L & supporters.

K790i_CXC1250477_Generic_R1EG001_Red49
K790i_CXC1250491_Russia_R1EG001_Red49

flash phone this file i think your phone is k790i not k790a..try this ..

regard

Thanks so much buddy for your help , but it didn't work.
 

Thanks so much buddy for your help ;), but it didn't work.


I also try with fighter cable and flash one by one with k790i and/or k790... but it's still dead...

Welcome to any suggestion !!!

regards

You may have a damaged GDFS area. Search for a solution along these lines. There are some post regarding the k790 especially if you tried to flash it with a k800 flash

EROM Repair
 

i know this is an old post but probably this would help to some others...

in my case a K790 came to me in DEAD condition but whenever i press power button, the infra red indicator display a blinking red light...

then before i flash the phone i use "EROM Repair" option and now the phone come alive again without flashing procedure....


BR