K300 Problem - GSM-Forum

nafg · 01-17-2006, 19:50

hi i have a k300 that dont power on and can atach to cruiser normaly only by recovery mode can atach and only give me the option to flash arm but i dont know what file should i put in there the flash and gdfs cant be put it in there this is the log

THIS IS WHAT I GOT WHEN I TRY TO ATACH IT NORMALY

Version 6.10 ready!
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8000
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 36
Phone color: Brown
Flash certificate: A1_DB2010_36_BROWN
Trying Brown CID36 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
All threads terminated.
Script error: EAccessViolation

THIS IS THE LOG IN RECOVERY MODE

Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8000
Protocol version: 3.1
Baudrate = 460800Bd
Trying CID29 recovery applet...
Sending applet prologue...
Trying CID16 recovery applet...
Trying CID36 recovery applet...
Time spent entering bootstrap: 3s
Initializing phone hardware...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 36
Phone hardware initialized OK
Analyzing RSA protection...
RSA protection is normal.

At this moment only have the option to flash arm replace certificate repair certificate and format gdfs

any help will be higly apreciate

thanks

NAFG

muppet · 01-17-2006, 19:56

First of all, upgrade to v8.00

There's a lot of bug fixes in v7.x->v8 that might help you.

Also check that the battery is fully charged.

nafg · 01-17-2006, 20:42

now

ersion 8.00 alpha ready!
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8000
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 36
Phone color: Brown
Flash certificate: A1_DB2010_36_BROWN
Trying Brown CID36 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
All threads terminated.

The applet has intentionally turned the phone off!
Script error: Unspecified [8.00 alpha.74]

muppet · 01-17-2006, 21:17

nafg: I read about this somewhere, now I can't find it again.
There is some reason that the applet is turning the phone off, but I've search the forum for the last 10 minutes and I can't find it.

If the phone's dead already, you could try recovering the phone's flash certificate and see if that helps.

Does Cruiser report what OTP CID the phone is?

nafg · 01-17-2006, 21:34

could you tell me what to do exactly about recovering the certificate? when i atach using recovery mode only give me this options flash arm replace certificate repair certificate and format gdfs i dot know what file should i use in this mode ??

Baudrate = 460800Bd
Trying CID36 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 36
Phone hardware initialized OK
Analyzing RSA protection...
RSA protection is normal

Acording to this log is cid 36

thanks for expend your time helping me man

NAFG

muppet · 01-17-2006, 21:42

When attached in Recovery Mode, click on "Repair Certificate"

Then see if you can attach to the phone in normal mode.

nafg · 01-17-2006, 21:55

repair cetificate in security rsa tab didnt fix anything

i cant atach normally any othr idea?

muppet · 01-17-2006, 22:07

Nope, I'm out of ideas.
I think the problem is a hardware one, the applet shuts down when it can't the flash chip. But the fact you can repair certificate alright would contradict that.

So no, no idea I'm sorry.

nafg · 01-17-2006, 22:19

damn iam **** you are the man here and you are out of ideas

ok people who can beat muppet knowlege lol

thanks anyway for your time man

NAFG

Spoochy · 01-18-2006, 10:13

exactly the same happend with my K500 and my fully working K700..... the cruiser can't write data to the phones... i tried 7, 7.15, 7,16 and 8 with no luck.

01-17-2006, 19:50	#1 (permalink)
nafg No Life Poster Join Date: Nov 2005 Location: CHILE Posts: 906 Member: 196727 Status: Offline Thanks Meter: 419	K300 Problem hi i have a k300 that dont power on and can atach to cruiser normaly only by recovery mode can atach and only give me the option to flash arm but i dont know what file should i put in there the flash and gdfs cant be put it in there this is the log THIS IS WHAT I GOT WHEN I TRY TO ATACH IT NORMALY Version 6.10 ready! Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8000 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 36 Phone color: Brown Flash certificate: A1_DB2010_36_BROWN Trying Brown CID36 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 2s Initializing phone hardware... All threads terminated. Script error: EAccessViolation THIS IS THE LOG IN RECOVERY MODE Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8000 Protocol version: 3.1 Baudrate = 460800Bd Trying CID29 recovery applet... Sending applet prologue... Trying CID16 recovery applet... Trying CID36 recovery applet... Time spent entering bootstrap: 3s Initializing phone hardware... Flash manufacturer: Intel Flash ID: 0x890D OTP Security Level: 1 (Retail) OTP CID: 36 Phone hardware initialized OK Analyzing RSA protection... RSA protection is normal. At this moment only have the option to flash arm replace certificate repair certificate and format gdfs any help will be higly apreciate thanks NAFG

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k300 problem dead after rebuild crcs, why	freakyass	SonyEricsson (USB-Smart)	2	06-06-2006 19:50
k300 problems!	Alex Unlock	SonyEricsson (USB-Smart)	0	02-24-2006 10:49
k300 problem	djssergy	Universalbox	3	02-05-2006 04:47
Strange K300 Problem	Jankovic	HWK	0	07-26-2005 18:33
PBB SE: K300 problem	Victor	Phoenix Black Box	2	05-19-2005 15:54

01-17-2006, 19:56	#2 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	First of all, upgrade to v8.00 There's a lot of bug fixes in v7.x->v8 that might help you. Also check that the battery is fully charged.

01-17-2006, 20:42	#3 (permalink)
nafg No Life Poster Join Date: Nov 2005 Location: CHILE Posts: 906 Member: 196727 Status: Offline Thanks Meter: 419	now ersion 8.00 alpha ready! Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8000 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 36 Phone color: Brown Flash certificate: A1_DB2010_36_BROWN Trying Brown CID36 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 2s Initializing phone hardware... All threads terminated. The applet has intentionally turned the phone off! Script error: Unspecified [8.00 alpha.74]

01-17-2006, 21:17	#4 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	nafg: I read about this somewhere, now I can't find it again. There is some reason that the applet is turning the phone off, but I've search the forum for the last 10 minutes and I can't find it. If the phone's dead already, you could try recovering the phone's flash certificate and see if that helps. Does Cruiser report what OTP CID the phone is?

01-17-2006, 21:34	#5 (permalink)
nafg No Life Poster Join Date: Nov 2005 Location: CHILE Posts: 906 Member: 196727 Status: Offline Thanks Meter: 419	could you tell me what to do exactly about recovering the certificate? when i atach using recovery mode only give me this options flash arm replace certificate repair certificate and format gdfs i dot know what file should i use in this mode ?? Baudrate = 460800Bd Trying CID36 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Flash manufacturer: Intel Flash ID: 0x890D OTP Security Level: 1 (Retail) OTP CID: 36 Phone hardware initialized OK Analyzing RSA protection... RSA protection is normal Acording to this log is cid 36 thanks for expend your time helping me man NAFG

01-17-2006, 21:42	#6 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	When attached in Recovery Mode, click on "Repair Certificate" Then see if you can attach to the phone in normal mode.

01-17-2006, 21:55	#7 (permalink)
nafg No Life Poster Join Date: Nov 2005 Location: CHILE Posts: 906 Member: 196727 Status: Offline Thanks Meter: 419	repair cetificate in security rsa tab didnt fix anything i cant atach normally any othr idea?

01-17-2006, 22:07	#8 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	Nope, I'm out of ideas. I think the problem is a hardware one, the applet shuts down when it can't the flash chip. But the fact you can repair certificate alright would contradict that. So no, no idea I'm sorry.

01-17-2006, 22:19	#9 (permalink)
nafg No Life Poster Join Date: Nov 2005 Location: CHILE Posts: 906 Member: 196727 Status: Offline Thanks Meter: 419	damn iam **** you are the man here and you are out of ideas ok people who can beat muppet knowlege lol thanks anyway for your time man NAFG

01-18-2006, 10:13	#10 (permalink)
Spoochy Freak Poster Join Date: May 2003 Location: Norway Posts: 253 Member: 28045 Status: Offline Thanks Meter: 18	exactly the same happend with my K500 and my fully working K700..... the cruiser can't write data to the phones... i tried 7, 7.15, 7,16 and 8 with no luck.