K600i - dead after test point cid49 red - GSM-Forum

lesiu23 · 07-03-2006, 15:04

I wanted to unlock this phone, i couldn't unlock rsa but it wan't work, i wanted to change color but it have newer version, so I wanted to change color like here http:///vbb/showthread.php?t=307634 when I connect tp I had error that possibly wrong test point, and when I wanted to try again I got this message below every time when I want to connect phone to cruiser:

System diagnostics passed.
Version 9.74 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Phone color: None
Flash certificate: -
All threads terminated.

I'm using tp from k608, cause I have no tp like in k600

Can someone help me

MOBICOM · 07-03-2006, 15:57

In main TAB select "boot thry TP any cid". You probably try with "normal boot"

wbr.

MUNEEB_AKHTAR_RAZA · 07-04-2006, 10:50

Brother u also can use recovery option to recover ur phone!!
Br
Muneeb Akhtar Raza

lesiu23 · 07-04-2006, 14:11

No I tried with boot with tp any cid, I'm connecting tp then is powering phone and nothing until I reinsert batery and I have this
[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Connect the testpoint!
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Trying recovery applet...
Sending applet prologue...
Disconnect the testpoint!
All threads terminated.

Possibly wrong testpoint!

When I'm using recovery boot cid 49

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Trying CID49 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 050729 1301 NPA1CXC1325413_CERTLOADER R4C
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
RSA protection is normal.
Phone hardware initialized OK

But I have only imei and security RSA options
What else I can do???

palax · 12-11-2006, 05:00

i have the same problem....

erom damage by cruiser....after unlock rsa.............

how can repair it....??????

07-03-2006, 15:04	#1 (permalink)
lesiu23 Junior Member Join Date: Aug 2005 Age: 46 Posts: 2 Member: 168249 Status: Offline Thanks Meter: 0	K600i - dead after test point cid49 red I wanted to unlock this phone, i couldn't unlock rsa but it wan't work, i wanted to change color but it have newer version, so I wanted to change color like here http:///vbb/showthread.php?t=307634 when I connect tp I had error that possibly wrong test point, and when I wanted to try again I got this message below every time when I want to connect phone to cruiser: System diagnostics passed. Version 9.74 ready! [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x7100 Protocol version: 3.1 Baudrate = 460800Bd Phone color: None Flash certificate: - All threads terminated. I'm using tp from k608, cause I have no tp like in k600 Can someone help me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
v3r dead after Test point unlocking	aukonline	Smart-Clip	11	10-22-2007 21:56
siemens AX72 dead after test point	qayyoom1	DreamBox	12	03-14-2007 11:55
C65 Dead after Test point	LordMen007	Siemens Hardware Repair Area	1	11-27-2005 20:44
M55 V11 dead after Test Point	silhouette	E-Gold Based Phones	6	03-21-2005 21:29
a52 DEAD after test point,help me please	mohammed	E-Gold Based Phones	2	06-02-2004 00:17

07-03-2006, 15:57	#2 (permalink)
MOBICOM No Life Poster Join Date: Jun 2004 Location: MACEDONIA Posts: 1,895 Member: 67805 Status: Offline Thanks Meter: 364	In main TAB select "boot thry TP any cid". You probably try with "normal boot" wbr.

07-04-2006, 10:50	#3 (permalink)
MUNEEB_AKHTAR_RAZA No Life Poster Join Date: Jun 2005 Location: Timeless zone! Age: 35 Posts: 1,720 Member: 152244 Status: Offline Sonork: 100.1591179 Thanks Meter: 162	Brother u also can use recovery option to recover ur phone!! Br Muneeb Akhtar Raza

07-04-2006, 14:11	#4 (permalink)
lesiu23 Junior Member Join Date: Aug 2005 Age: 46 Posts: 2 Member: 168249 Status: Offline Thanks Meter: 0	No I tried with boot with tp any cid, I'm connecting tp then is powering phone and nothing until I reinsert batery and I have this [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Connect the testpoint! Powering on the phone... Baseband chip ID: 0x7100 Protocol version: 3.1 Baudrate = 460800Bd Trying recovery applet... Sending applet prologue... Disconnect the testpoint! All threads terminated. Possibly wrong testpoint! When I'm using recovery boot cid 49 [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x7100 Protocol version: 3.1 Baudrate = 460800Bd Trying CID49 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 050729 1301 NPA1CXC1325413_CERTLOADER R4C Flash manufacturer: Intel Flash ID: 0x890D OTP Security Level: 1 (Retail) OTP CID: 49 RSA protection is normal. Phone hardware initialized OK But I have only imei and security RSA options What else I can do???

12-11-2006, 05:00	#5 (permalink)
palax Freak Poster Join Date: Mar 2006 Location: Ina Posts: 153 Member: 247765 Status: Offline Sonork: 100.1607102 Thanks Meter: 7	i have the same problem.... erom damage by cruiser....after unlock rsa............. how can repair it....??????