K700 / no network - GSM-Forum

sven.soltermann · 07-14-2005, 11:11

Hello..

I tested some things with my K700.. (a lot of things..)

But now, I have no network.. If I look in service menu, und total call time, I get "not available"...

I think I've destroyed some GDFS areas... Has someone a full K700 GDFS?

Greets Sven

sven.soltermann · 07-14-2005, 11:35

Hey..

Sorry for double posting..

I tested with SEMCTool 2.2 (sorry..)
There I got this:

Code:

Bypass boot authority
Phone OTP CID: 29
Load data to phone
Clear all SP locks
ERROR: GDFS Integrity check fail

And also, I attached debug log..

Greets Sven

Max_B · 07-14-2005, 11:40

Hi

Try to perform manual factory reset, from the menu.

Max_B

sven.soltermann · 07-14-2005, 11:43

Quote:

Originally Posted by Max_B

Hi

Try to perform manual factory reset, from the menu.

Max_B

Hello Max,

Thanks for your answer

I did that.. Before this, I couldn't play any sounds, and vibra was also not working..

After the factory reset only Network don't work..

Greets Sven

sven.soltermann · 07-14-2005, 15:08

Can nobody help?

Lead: Do you have full GDFS? Or can I read out from another phone?

Thanks

Lead · 07-14-2005, 15:37

It is in the support area.

sven.soltermann · 07-14-2005, 15:57

I can flash full GDFS of K700 Brown CID36?

Ok.. I try..

Thanks

EDIT: It worked! Thanks a lot!

simlockmaster · 09-13-2005, 21:33

how to flash gdfs whit cruiser 5.02
I use "write to GDFS from file" and I hawe GDFS Error: Unit not found

rakishi · 09-14-2005, 09:54

Quote:

Originally Posted by sven.soltermann

I can flash full GDFS of K700 Brown CID36?

Ok.. I try..

Thanks

EDIT: It worked! Thanks a lot!

Hi sven.soltermann, can you describe what tab n where u used to flash full GDFS K700 brown CID36? I have same problem after flashing no network but my K700 color is RED cid 29.

sven.soltermann · 09-14-2005, 16:43

Quote:

Originally Posted by edrickyle

Hi sven.soltermann, can you describe what tab n where u used to flash full GDFS K700 brown CID36? I have same problem after flashing no network but my K700 color is RED cid 29.

Hello,

You can flash full GDFS with ARM button... Don't forget to Read codes after you flashed full GDFS. I also had CID 29 Red, and flashed CID 36 brown without any problems...

Greets Sven

s1emens · 09-14-2005, 18:35

@sven.soltermann
Can i used this gdfs to solve K700 languange menu freeze problem? Will try it 2morrow then.

BR,
s1emens

sven.soltermann · 09-14-2005, 18:48

Quote:

Originally Posted by s1emens

@sven.soltermann
Can i used this gdfs to solve K700 languange menu freeze problem? Will try it 2morrow then.

BR,
s1emens

Hello,

I would first try to reflash it completly... If it don't work, you can try, but all your calibration datas go lost...

Greet Sven

s1emens · 09-15-2005, 04:17

Ok already try it.
1. Attach phone
2. Flash GDFS as ARM
3. Read Codes
4. Detach

Problem still exist. Not working. Thanks anyway

BR,
s1emens

muppet · 09-15-2005, 04:21

Attach to phone
Go to "Security RSA" tab and format security zone + recalculate CRCs
See if that helps.

llcoolr · 02-06-2007, 09:13

got same problem
ant-sw is good
flash is good
gdfs is good
i rehoted all pcb but same thing
need help

07-14-2005, 11:11	#1 (permalink)
sven.soltermann Freak Poster Join Date: Nov 2003 Location: 228 (Switzerland) :) Age: 34 Posts: 337 Member: 44110 Status: Offline Thanks Meter: 1	K700 / no network Hello.. I tested some things with my K700.. (a lot of things..) But now, I have no network.. If I look in service menu, und total call time, I get "not available"... I think I've destroyed some GDFS areas... Has someone a full K700 GDFS? Greets Sven

07-14-2005, 15:57	#7 (permalink)
sven.soltermann Freak Poster Join Date: Nov 2003 Location: 228 (Switzerland) :) Age: 34 Posts: 337 Member: 44110 Status: Offline Thanks Meter: 1	I can flash full GDFS of K700 Brown CID36? Ok.. I try.. Thanks EDIT: It worked! Thanks a lot! Last edited by sven.soltermann; 07-14-2005 at 16:02. Reason: It worked ;)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k700 no charging indication i will remove ic make a jumper no workplease help me	prakash40	Sony Ericsson Hardware Repair	0	09-29-2009 07:44
k700 no charging indication i will remove ic make a jumper no workplease help me	prakash40	Sony Ericsson Hardware Repair	0	09-26-2009 06:33
k700 cid29 no network	GEORGIA	Cruiser Suite	1	02-25-2006 12:37
k700 no network	wellerelc	Sony Ericsson Hardware Repair	0	12-15-2005 10:55
k700 no network	bassam_gsm	Cruiser Suite	2	10-28-2005 07:11

07-14-2005, 11:40	#3 (permalink)
Max_B No Life Poster Join Date: Oct 2002 Location: PARIS Posts: 1,565 Member: 16856 Status: Offline Sonork: 1582037 Thanks Meter: 441	Hi Try to perform manual factory reset, from the menu. Max_B

07-14-2005, 15:08	#5 (permalink)
sven.soltermann Freak Poster Join Date: Nov 2003 Location: 228 (Switzerland) :) Age: 34 Posts: 337 Member: 44110 Status: Offline Thanks Meter: 1	Can nobody help? Lead: Do you have full GDFS? Or can I read out from another phone? Thanks

07-14-2005, 15:37	#6 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	It is in the support area.

09-13-2005, 21:33	#8 (permalink)
simlockmaster Insane Poster Join Date: Oct 2003 Location: PL NS Posts: 69 Member: 42414 Status: Offline Thanks Meter: 3	how to flash gdfs whit cruiser 5.02 I use "write to GDFS from file" and I hawe GDFS Error: Unit not found

09-14-2005, 18:35	#11 (permalink)
s1emens No Life Poster Join Date: Oct 2003 Age: 43 Posts: 1,335 Member: 40602 Status: Offline Thanks Meter: 118	@sven.soltermann Can i used this gdfs to solve K700 languange menu freeze problem? Will try it 2morrow then. BR, s1emens

09-15-2005, 04:17	#13 (permalink)
s1emens No Life Poster Join Date: Oct 2003 Age: 43 Posts: 1,335 Member: 40602 Status: Offline Thanks Meter: 118	Ok already try it. 1. Attach phone 2. Flash GDFS as ARM 3. Read Codes 4. Detach Problem still exist. Not working. Thanks anyway BR, s1emens

09-15-2005, 04:21	#14 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	Attach to phone Go to "Security RSA" tab and format security zone + recalculate CRCs See if that helps.

02-06-2007, 09:13	#15 (permalink)
llcoolr No Life Poster Join Date: Feb 2004 Location: DZ W09 Age: 43 Posts: 3,607 Member: 53408 Status: Offline Sonork: 100.1593951 Thanks Meter: 1,261	got same problem ant-sw is good flash is good gdfs is good i rehoted all pcb but same thing need help