New Release - Cruiser v 9.60 - Z300 features added - Page 3 - GSM-Forum

calmant224 · 05-12-2006, 07:54

the same problem whith z300i i try tu use manual mode the same problem please cruiser team tel a what is the problem every time when i try to conect give me this error ( Script error: Unspecified [9.60.755])

qwerty1234 · 05-12-2006, 08:32

Quote:

Originally Posted by KhOliO

where is
U880

we want fast update

For all who still did not understand :

LG U880 is QUALCOMM based phone, NOT SE based.
This means it will NEVER be supported by Cruiser.

Lead explained this 1000 times but.....

Lead · 05-12-2006, 08:41

The error

Code:

Script error: Unspecified [9.60.755])

means Cruiser is not able to communicate with the phone on second UART (connector pins DTMS/DFMS).
Communication starts on UART1 (CTMS/CFMS) and then switches to UART2.
If your cable does not support UART switching, Z300 unlock will not work.
If the cable contains the chip marked 74HC4053 it should support UART switching.

Is here anyone who is able to flash ARM part of T610/T630/T68/T65/T39 and not able to read codes from a Z300?

Anyways, I am going to implement code reading via UART1 too.

Lead · 05-12-2006, 08:44

Quote:

Originally Posted by Amir-SkillZ

MUST NEED A STABLE RELEASE BY LEAD AND ALSO A GOOD CLEAR UNLOCKING FLASHING GUIDE FOR LATEST MOBILES

Will be.
Unfortunately I underestimated the number of hours per single day.
I thought it was 48.

SubTen · 05-12-2006, 08:45

Quote:

Originally Posted by qwerty1234

For all who still did not understand :

LG U880 is QUALCOMM based phone, NOT SE based.
This means it will NEVER be supported by Cruiser.

Lead explained this 1000 times but.....

hehehe Lead actuall only said it 3 times

http://forum.gsmhosting.com/vbb/sear...archid=8077434

gsmservices · 05-12-2006, 08:54

its a great work again cruiser-team
thanx

qwerty1234 · 05-12-2006, 08:59

Quote:

Originally Posted by SubTen

hehehe Lead actuall only said it 3 times

http://forum.gsmhosting.com/vbb/sear...archid=8077434

Well... I may overstate a little but it's getting too annoying

br

calmant224 · 05-12-2006, 11:53

can you tell me what cable i heve to use to unlock z300i i have fighter 4in1 cable but not worck on this phone (other phone worck fine)

google.com · 05-12-2006, 12:04

Cruiser 9.61 is out!

Get it here

http://mycruiser.org/dwnld_check.php..._size=13175708

Lead · 05-12-2006, 12:35

timing problem, will be fixed ASAP.

calmant224 · 05-12-2006, 12:51

ths mr lead you are a great man

idoniletisim · 05-12-2006, 12:59

Quote:

Originally Posted by Lead

timing problem, will be fixed ASAP.

goood works lead nice support

the_laser · 05-12-2006, 13:30

@lead:
my cable support uart switching, but you so badly copied my work, so it not works on my z300. why ? it work fine on setool2 of course

when you will add flashing for z300? maybe i need to give you flashfiles ?
np, just ask

ps.
thx for NOT removing string in loader. and did you restored strings in 810 prodloader ?

mutant_x · 05-12-2006, 13:44

@ lead

please include update sharp CID 73. without testpoint
thanks...

Mizar · 05-12-2006, 14:00

Quote:

Originally Posted by the_laser

@lead:
my cable support uart switching, but you so badly copied my work, so it not works on my z300. why ? it work fine on setool2 of course

when you will add flashing for z300? maybe i need to give you flashfiles ?
np, just ask

ps.
thx for NOT removing string in loader. and did you restored strings in 810 prodloader ?

Hehe, this is very poor..

. Your betaversions without real security are just for fun which we already have. Why you don't post the solutions sources directly to here so others can copy it more simpler than now? There wouldn't be a big difference... You are "good" programmer. Really ""Good"".

05-12-2006, 08:41	#33 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	The error Code: Script error: Unspecified [9.60.755]) means Cruiser is not able to communicate with the phone on second UART (connector pins DTMS/DFMS). Communication starts on UART1 (CTMS/CFMS) and then switches to UART2. If your cable does not support UART switching, Z300 unlock will not work. If the cable contains the chip marked 74HC4053 it should support UART switching. Is here anyone who is able to flash ARM part of T610/T630/T68/T65/T39 and not able to read codes from a Z300? Anyways, I am going to implement code reading via UART1 too.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
!!! New Release - Cruiser+ SonyEricsson PNX5230 Unlocker v1.05 (new version) !!!	Mizar	Cruiser Suite	178	07-02-2008 14:32
!!! New Release - Cruiser+ SonyEricsson A2 Flasher v1.01 !!!	Mizar	Cruiser Suite	137	05-23-2008 07:05
!!! 2008/02/26 - New Release - Cruiser+ SonyEricsson Calypso flasher v1.02 !!!	Mizar	Cruiser Suite	100	03-20-2008 21:38
.:: New Release - !!! Cruiser+ PDA Flasher v1.06 !!! ::.	Mizar	Cruiser Suite	31	03-20-2008 08:05
.:: New Release - !!! Cruiser+ PDA Flasher v1.03 !!! ::.	Mizar	Cruiser Suite	63	01-08-2008 20:35

05-12-2006, 07:54	#31 (permalink)
calmant224 Freak Poster Join Date: Apr 2005 Age: 43 Posts: 318 Member: 137735 Status: Offline Thanks Meter: 20	the same problem whith z300i i try tu use manual mode the same problem please cruiser team tel a what is the problem every time when i try to conect give me this error ( Script error: Unspecified [9.60.755])

05-12-2006, 08:54	#36 (permalink)
gsmservices No Life Poster Join Date: Dec 2004 Age: 48 Posts: 790 Member: 101827 Status: Offline Thanks Meter: 23	its a great work again cruiser-team thanx

05-12-2006, 11:53	#38 (permalink)
calmant224 Freak Poster Join Date: Apr 2005 Age: 43 Posts: 318 Member: 137735 Status: Offline Thanks Meter: 20	can you tell me what cable i heve to use to unlock z300i i have fighter 4in1 cable but not worck on this phone (other phone worck fine)

05-12-2006, 12:04	#39 (permalink)
google.com Freak Poster Join Date: Dec 2004 Posts: 166 Member: 97347 Status: Offline Thanks Meter: 0	Cruiser 9.61 is out! Get it here http://mycruiser.org/dwnld_check.php..._size=13175708

05-12-2006, 12:35	#40 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	timing problem, will be fixed ASAP.

05-12-2006, 12:51	#41 (permalink)
calmant224 Freak Poster Join Date: Apr 2005 Age: 43 Posts: 318 Member: 137735 Status: Offline Thanks Meter: 20	ths mr lead you are a great man

05-12-2006, 13:30	#43 (permalink)
the_laser No Life Poster Join Date: Feb 2002 Location: Russia Age: 44 Posts: 2,681 Member: 9519 Status: Offline Thanks Meter: 2,150	@lead: my cable support uart switching, but you so badly copied my work, so it not works on my z300. why ? it work fine on setool2 of course when you will add flashing for z300? maybe i need to give you flashfiles ? np, just ask ps. thx for NOT removing string in loader. and did you restored strings in 810 prodloader ?

05-12-2006, 13:44	#44 (permalink)
mutant_x Freak Poster Join Date: May 2004 Age: 53 Posts: 262 Member: 66369 Status: Offline Thanks Meter: 35	@ lead please include update sharp CID 73. without testpoint thanks...