..!! New Release: CruiserSuite TP Full Unlocker v1.02 - more features added !!..

[shakeelajmal]

nice move cruiser team...

Br

[elnozahy_team]

wow....good work cruiser team......

[javidsat]

tanks veryyyyyyyyy goooooooooooooddddddd

[HANDY_ZENTRUM]

thank you super cruiser team

[harun_warsanto]

Great job cruiser team.

[amgeu1]

waiting for UC-20 too. In Uk it looks like the sellers don't have them yet.

[whalz]

my uc-20 cable is 2 days away... but one question to product supporter..can you give instruction how to use gdfs repair for cruiser?


thnx in advance!

[Mizar]

Originally Posted by whalz

my uc-20 cable is 2 days away... but one question to product supporter..can you give instruction how to use gdfs repair for cruiser?


thnx in advance!

Check folllowing posts of this thread:

http://www./showpo...1&postcount=23

http://www./showpo...18&postcount=9

[wagdygsm]

yes its very great work

[butaktelco]

Post The logs here
About using Test point with UC-20 cable

[neprom]

16:35:40 SE Testpoint Full Unlocker v1.01 by Cruiser Team
16:35:40 Initializing...
! 16:35:40 1. Choose the phone model
! 16:35:40 2. If you want to skip Testpoint Stage 1, select the appropriate option (see documentation)
! 16:35:40 3. Connect the data cable and the power supply clips to the phone
! 16:35:40 4. Double-click on cruiser UC-20 test-point cable
16:35:45 Connecting via Cruiser UC-20 Cable (COM4)…
16:35:45 Device driver version: 2.4.6.0
16:35:45 Device driver date: 3-13-2008
16:35:48 Connecting to the baseband CPU...
16:35:48 Entering baseband CPU service mode...
16:35:48 Detected chipset: DB2020
16:35:48 Boot mode: ROM
16:35:51 Sending loader...
16:35:52 Restarting phone …
! 16:35:52 Connect the Testpoint Stage 2
16:37:08 Testpoint connected successfully
16:37:08 Connecting to the baseband CPU...
16:37:11 Entering baseband CPU service mode...
16:37:11 Sending loader...
! 16:37:13 You may release the test-point now
16:37:13 Sending loader...
16:37:14 Writing flash…
16:37:15 Restarting phone …
16:37:17 Connecting to the baseband CPU...
16:37:18 Entering baseband CPU service mode...
16:37:18 Sending loader...
16:37:20 Writing flash…
16:37:21 Turning off the phone...
16:37:23 Done.
! 16:37:23 Please disconnect battery and cable from the phone!

red blink v630 - live now thnx

[Mizar]

Dear all,

there is a new release again. We have released new version SonyEricsson Full Unlocker via TestPoint with Security Zone repair possibility. The CruiserSuite TP Full Unlocker v1.02 now supports unlock and repair of specific DB2010 K510, W300, W810, Z530 via single (one) TP . For work you need UC-20 TestPoint cable and CruiserSuite dongle. You can buy both from any of our official resellers.

IMPORTANT: All other TestPoint solutions force the phone address bus pins to 3.3V which is exceeding its maximal allowed voltage almost twice. Only the UC-20 TP cable was designed to prevent this and avoid likely flash chip damage. UC-20 TestPoint box is a current limited variable voltage power supply with connection sensing feature.

CruiserSuite TP Full Unlocker v1.02 release info:

• Added support for unlock and repair of specific K510, W300, W810, Z530.
• Specific means DB2010 / CID 49, with DB2012 chip on the PCB - those models that were not previously supported by Cruiser+
• So all listed models are now fully supported
• DB2010 testpointing is again single TP stage full unlock / repair
• Added recovery mode feature for DB2010 (for failed EROM write)
• Download from this Rapidshare.com link.

For complete release info, click here.

[mohangbvk]

Originally Posted by Mizar

Dear all,

there is a new release again. We have released new version SonyEricsson Full Unlocker via TestPoint with Security Zone repair possibility. The CruiserSuite TP Full Unlocker v1.02 now supports unlock and repair of specific DB2010 K510, W300, W810, Z530 via single (one) TP . For work you need UC-20 TestPoint cable and CruiserSuite dongle. You can buy both from any of our official resellers.

IMPORTANT: All other TestPoint solutions force the phone address bus pins to 3.3V which is exceeding its maximal allowed voltage almost twice. Only the UC-20 TP cable was designed to prevent this and avoid likely flash chip damage. UC-20 TestPoint box is a current limited variable voltage power supply with connection sensing feature.

CruiserSuite TP Full Unlocker v1.02 release info:

• Added support for unlock and repair of specific K510, W300, W810, Z530.
• Specific means DB2010 / CID 49, with DB2012 chip on the PCB - those models that were not previously supported by Cruiser+
• So all listed models are now fully supported
• DB2010 testpointing is again single TP stage full unlock / repair
• Added recovery mode feature for DB2010 (for failed EROM write)
• Download from this Rapidshare.com link.

CruiserSuite TP Full Unlocker v1.01 release info:

• Added support for full unlock of DB2012, CID 50,51,52,53
• DB2012 single testpoint full unlock
• Recovery mode feature for DB2012 - using testpoint stage 2
• Minor fixes
• Updated user guide

All features of CruiserSuite TP Full Unlocker software:

• Component of Cruiser Suite (once you have Cruiser Suite dongle, you can use it).
• Simple to use & failsafe
• Supports full unlock of all DB2020 plattform based SonyEricsson phones
• All current DB2020 CIDs are suported
• Supports full unlock of DB2012 plattform based phones, CID 50, 51, 52, 53; by one (single) TP
• This software is for all users who can disassemble the phone - also for inexperienced ones. (For disassembling phones, we recommend to read proper SonyEricsson service manuals.)
• TP Full Unlocker does not destroy phone calibration data (so typical for SeTool ... )
• For the phone safety, TestPointing requires UC-20 TP cable.
• Unlike other amateur solutions which use external battery connection to the TP, our software uses specially designed UC-20 cable which can handle different bus voltages and prevents any potential flash chip damage.
• TP is done in two stages. Once you complete TP stage 1 you don't need to repeat it anymore. Phone is then bootable via the 2nd testpoint anytime.
• PDF manual is available after installation as usual in Documents folder

You can download the latest version from our Downloads section or directly from this Rapidshare link.

ENJOY!

hello
this is the only team which provides fully correct and real professional solutions , not like others just provide solutions with risk of getting handsets dead while working
regards
GBVK

[nelsky]

cruiser team still kicking...

go go go...keep it up team...

BR,

[Magano]

Yes very nice work
now no SE phone can notbe repaired .
thanks team .
wbr