pb with w200 flashing - GSM-Forum

SLIPLOCK · 05-16-2007, 01:44

hit to all

her is the log attach w200i:

System diagnostics passed.
Version 10.43 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 52
Phone color: Red
Flash certificate: A1_DB2010_52_RED
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 061205 1354 HAN_DB2012_FLASHLOADER_...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 51
Phone hardware initialized OK

so my questions:
must i flash cid 51 or 52 ?
can cruiser do the job?
thanks a lot
regards

SLIPLOCK · 05-16-2007, 04:47

no one can help about this?

harish35200 · 05-16-2007, 07:03

I have same problem . .. i also cant unlock this phone with cruiser.. .. it is db2010 phn...and cid 51...then y cruiser cannot unlock this phone....

SLIPLOCK · 05-16-2007, 07:52

yes i know, unlock is not supported, but flashing?someone can help please?
regards

mily2 · 05-16-2007, 10:34

you must use cid52 files when phone cid is 52

mauro1947 · 05-16-2007, 10:39

Quote:

Originally Posted by SLIPLOCK

hit to all

her is the log attach w200i:

System diagnostics passed.
Version 10.43 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 52
Phone color: Red
Flash certificate: A1_DB2010_52_RED
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 061205 1354 HAN_DB2012_FLASHLOADER_...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 51
Phone hardware initialized OK

so my questions:
must i flash cid 51 or 52 ?
can cruiser do the job?
thanks a lot
regards

You must use CID52 flash files.
Yes, Cruiser can do the job but you will need logs for customize the phone.
Regards!

SLIPLOCK · 05-16-2007, 17:55

thanks a lot for answer
regards

SLIPLOCK · 05-16-2007, 18:04

so now another pb:

[ --- Flash Main Firmware --- ]
Flash file: "W200i_CXC1250719_Generic_R4GB001_Red52.cw2sw"
Waiting for flash file to load...

Target CPU mismatch

any help please?

mily2 · 05-16-2007, 18:18

i think tahat cruiser team is too fast write that this model is supported
practicly this model is unsuported
many people have problem with boot this phone
i dont know how help you
try lowest speed
select phone amnuualy

SLIPLOCK · 05-16-2007, 18:32

thanks for help,
i will spend more time on this phone and if i have something new i will post here.
maybe next update will solve the pb.
regards

connectingfun · 05-29-2007, 09:41

i have smae problem ple help me to flash w200

hooi76 · 06-11-2007, 05:44

why the customization is J300 in autodetect mode. will the phone dead, any success on flashing?

anjumm98 · 09-11-2007, 21:11

i want to know how to customize the phone W200i with cruiser ??

morshad1 · 03-31-2008, 08:11

want to know how to customize the phone W200i with cruiser ??

memedyosep · 10-05-2009, 16:52

you must tp with box uc 20 or log cruiser

05-16-2007, 01:44	#1 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	pb with w200 flashing hit to all her is the log attach w200i: System diagnostics passed. Version 10.43 ready! [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Booting via ROM... Sony Ericsson phone detected. Phone CID: 52 Phone color: Red Flash certificate: A1_DB2010_52_RED Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 061205 1354 HAN_DB2012_FLASHLOADER_... Flash manufacturer: ST Microelectronics Flash ID: 0x2019 OTP Security Level: 1 (Retail) OTP CID: 51 Phone hardware initialized OK so my questions: must i flash cid 51 or 52 ? can cruiser do the job? thanks a lot regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pb with flash k810	ponix	SETool2	6	04-02-2010 09:04
NEW SECURITY (RESPIN) W200 flash Done !!	mbiborna	SETool2	0	03-29-2010 13:54
pb with N70 +6680 with flashing	kifah	Universalbox	3	11-21-2008 15:36
pb with vygis for flashing	SLIPLOCK	VygisToolbox	16	08-24-2005 19:44
pb with S300 flash	micmac	Trident/AGERE Platform	5	04-09-2003 15:44

05-16-2007, 04:47	#2 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	no one can help about this?

05-16-2007, 07:03	#3 (permalink)
harish35200 No Life Poster Join Date: Jan 2006 Location: india Age: 45 Posts: 865 Member: 216088 Status: Offline Thanks Meter: 43	I have same problem . .. i also cant unlock this phone with cruiser.. .. it is db2010 phn...and cid 51...then y cruiser cannot unlock this phone....

05-16-2007, 07:52	#4 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	yes i know, unlock is not supported, but flashing?someone can help please? regards

05-16-2007, 10:34	#5 (permalink)
mily2 No Life Poster Join Date: Jun 2006 Location: Poland Posts: 915 Member: 290638 Status: Offline Thanks Meter: 50	you must use cid52 files when phone cid is 52

05-16-2007, 17:55	#7 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	thanks a lot for answer regards

05-16-2007, 18:04	#8 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	so now another pb: [ --- Flash Main Firmware --- ] Flash file: "W200i_CXC1250719_Generic_R4GB001_Red52.cw2sw" Waiting for flash file to load... Target CPU mismatch any help please?

05-16-2007, 18:18	#9 (permalink)
mily2 No Life Poster Join Date: Jun 2006 Location: Poland Posts: 915 Member: 290638 Status: Offline Thanks Meter: 50	i think tahat cruiser team is too fast write that this model is supported practicly this model is unsuported many people have problem with boot this phone i dont know how help you try lowest speed select phone amnuualy

05-16-2007, 18:32	#10 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	thanks for help, i will spend more time on this phone and if i have something new i will post here. maybe next update will solve the pb. regards

05-29-2007, 09:41	#11 (permalink)
connectingfun Insane Poster Join Date: Feb 2004 Age: 43 Posts: 59 Member: 52585 Status: Offline Thanks Meter: 0	i have smae problem ple help me to flash w200

09-11-2007, 21:11	#13 (permalink)
anjumm98 Freak Poster Join Date: May 2006 Location: In Mobile Lab Posts: 268 Member: 278476 Status: Offline Sonork: 100.1592375 Thanks Meter: 119	i want to know how to customize the phone W200i with cruiser ??

03-31-2008, 08:11	#14 (permalink)
morshad1 Freak Poster Join Date: May 2006 Location: BDG.DHAKA Posts: 228 Member: 274362 Status: Offline Thanks Meter: 25	want to know how to customize the phone W200i with cruiser ??

10-05-2009, 16:52	#15 (permalink)
memedyosep Freak Poster Join Date: Apr 2008 Posts: 103 Member: 739618 Status: Offline Thanks Meter: 16	you must tp with box uc 20 or log cruiser